商品名称： P+F 倍加福 KFD2-GUT-1.D 信号调节器 K-System (DIN rail, highly functional)
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： KFD2-GUT-1.D
产品参数
| Load | max. 650 Ω |
| Electromagnetic compatibility | NE 21:2007 |
| Voltage | 0.1 % of span |
| Current output | max. 20 µA |
| Safety Integrity Level (SIL) | SIL 2 |
| Labeling | space for labeling at the front |
| Width | 40 mm |
| Fault signal | downscale I ≤ 3.6 mA, upscale I ≥ 21 mA (acc. NAMUR NE43) |
| Configuration | via operating buttons via PACTware |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Output I, II/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2 |
| Programming interface | programming socket |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| RTD | max. 0.2 % of span |
| Measurement loop monitoring_1 | sensor breakage |
| Connection | screw terminals |
| Thermocouples | max. 10µV deviation of CJC: ±0.8 K |
| Rated voltage | U 20 ... 30 V DC |
| Display elements | LEDs , display |
| Mass | 300 g |
| Depth | 115 mm |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Types of measuring_1 | 2-, 3-, 5-wire technology |
| Cold junction compensation | external and internal |
| Power dissipation/power consumption | ≤ 2 W / 2.2 W |
| Output I, II | relay |
| Output III | Analog current output |
| Connection side | control side |
| Measurement loop monitoring | sensor breakage, sensor short-circuit |
| Potentiometer | 0.1 % of span when < 5 kΩ 0.5 % of span when > 5 kΩ |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms |
| Input resistance | ≥ 250 kΩ (0 ... 10 V) min. 1 MΩ (0 ... 1 V, -100 ... 100 mV) |
| Types of measuring | 2-, 3-, 4-wire technology |
| Rated current | I approx. 100 mA |
| Current range | 0 ... 20 mA or 4 ... 20 mA |
| Collective error message | Power Rail |
| Output III/power supply and collective error | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Interface/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Height | 119 mm |
| Contact loading | 250 V AC / 2 A / cos φ ≥ 0.7 ; 40 DC / 2 A |
| Temperature effect | Input: 0.005 %/K (50 ppm) of span ; current output: 0.005 %/K (50 ppm) of span |
| Sampling rate | approx. 700 ms |
| Signal type | Analog input |
| Degree of protection | IP20 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Measuring current | approx. 400 µA |
| Lead resistance | max. 50 Ω |
| Input/Other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Mechanical life | 5 x 10 switching cycles |
| Open loop voltage | max. 24 V DC |
| Output I, II against eachother | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
