商品名称： P+F 倍加福 KFD2-SOT3-Ex2.IO SIL-Capable Products for Hazardous Areas Safety Integrity Level 2
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： KFD2-SOT3-EX2.IO
产品参数
| Signal type | Digital Input |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| IECEx marking | Ex nA [ia Ga] IIC T4 Gc , [Ex ia Da] IIIC , [Ex ia Ma] I |
| Output II | signal ; Transistor |
| Output/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Connection side | control side |
| Output/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V |
| Signal level | 1-signal: (external voltage) - 3 V max. for 100 mA 0-signal: blocked output (off-state current ≤ 10 µA) |
| Input | Ex ia |
| Output I | signal ; Transistor |
| Safety Integrity Level (SIL) | SIL 2 |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Response time | ≤ 200 µs |
| Connection | screw terminals |
| Systematic capability (SC) | SC 3 |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 |
| Display elements | LEDs |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Line fault detection | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA |
| UL approval | E106378 |
| Rated voltage | U 30 V DC |
| Mass | approx. 150 g |
| Marking | II 3(1)G Ex nA [ia Ga] IIC T4 Gc [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Power dissipation | ≤ 1.1 W including maximum power dissipation in the output |
| Switching frequency | ≤ 5 kHz |
| Ripple | ≤ 10 % |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Current | I 17.1 mA |
| IECEx certificate | IECEx EXA 16.0009X |
| Collective error message | Power Rail |
| Configuration | via DIP switches |
| Depth | 115 mm |
| Power | P 45 mW (linear characteristic) |
| Pulse/Pause ratio | min. 100 µs / min. 100 µs |
| Labeling | space for labeling at the front |
| Control elements | DIP switch |
| Height | 119 mm |
| Width | 20 mm |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Degree of protection | IP20 |
| EU-type examination certificate | EXA 16 ATEX 0016 X |
| Control drawing | 116-0424 (cULus) |
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 |
| Maximum safe voltage | U 253 V AC (Attention! U is no rated voltage.) |
| Maximum safe voltage_1 | U 253 V AC (Attention! The rated voltage can be lower.) |
| Rated current | I 100 mA , short-circuit protected |
| Voltage | U 10.5 V |
| Rated values | acc. to EN 60947-5-6 (NAMUR), see manual for electrical data |
