商品名称： P+F 倍加福 KCD2-SLD-Ex1.1065 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： KCD2-SLD-EX1.1065
产品参数
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Control drawing | 116-0448 (cULus) |
| Connection side | field side |
| Input current | 80 mA at 24 V |
| Labeling | space for labeling at the front |
| Test current | max. 350 µA , calculated by I = 4.7 V / (15 kΩ + R ) |
| Safety Integrity Level (SIL) | SIL 3 |
| Degree of protection | IP20 |
| Marking | II 3(1)G Ex nC ec [ia Ga] IIC T4 Gc [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Signal type | Digital Output |
| Connection | screw terminals |
| Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms |
| Display elements | LEDs |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility | NE 21:2012 , EN 61326-3-2:2008 For further information see system description. |
| Configuration | via DIP switches |
| Protection against electrical shock | EN 61010-1:2010 |
| Output II/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 32 V |
| Connection_1 | terminals 7, 8 , non-intrinsically safe |
| Voltage | U 17.3 V |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Contact loading | 30 V DC/ 0.5 A resistive load |
| Mechanical life | 10 switching cycles |
| Output II | fault signal |
| Rated voltage | U 19 ... 30 V DC loop powered |
| Dimensions | 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2 |
| EU-type examination certificate | EXA 17 ATEX 0002 X |
| Current | I 220 mA |
| IECEx certificate | IECEx EXA 17.0001X |
| Signal level | loop powered 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 30 V DC (current limited to 5 mA) 0-signal: 0 ... 5 V DC |
| Open loop voltage | U typ. 16.4 V |
| Control elements | DIP switch |
| Internal resistor | R 80 Ω |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-15:2010 |
| Power dissipation | 1.3 W at 24 V |
| Maximum safe voltage | U 60 V (Attention! The rated voltage can be lower.) |
| Systematic capability (SC) | SC 3 |
| Output I | Ex ia |
| Test pulse length | max. 2 ms from DO card |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating. |
| Mass | approx. 150 g |
| IECEx marking | Ex nC ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I |
| Load | nominal 0.05 ... 18 kΩ , valid range for line fault detection (LFD) |
| Rated current | I 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card) |
| Maximum safe voltage_1 | U 60 V (Attention! The rated voltage can be lower.) |
| Maximum safe voltage_2 | U 60 V (Attention! The rated voltage can be lower.) |
| Power | P 947 mW |
| Current limit | I 65 mA |
| Inrush current | < 200 mA , 10 ms loop powered |
| UL approval | E106378 |
| Output/other circuits | basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Output I/other circuits | safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V |
