商品名称： P+F 倍加福 HiC2027 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： HiC2027
产品参数
| Mass | approx. 105 g |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 |
| Marking_1 | II 3G Ex nA IIC T4 Gc |
| Voltage drop | SL2: 1a(+), 1b(-), 7a(-): ≤ 6.1 V at 20 mA |
| Ripple | max. 50 µA |
| Output/power supply | functional insulation, rated insulation voltage 50 V AC |
| Settling time | 6 ms |
| Internal capacitance_1 | C 12 nF |
| Dimensions | 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D) |
| EU-type examination certificate | BASEEFA 13 ATEX 0075 X |
| Maximum safe voltage | U 250 V (Attention! The rated voltage can be lower.) |
| Input | Ex ia |
| Protection against electrical shock | UL 61010-1:2012 |
| Frequency range | field side into the control side: bandwidth with 0.5 V signal 0 ... 6 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V signal 0.3 ... 6 kHz (-3 dB) |
| Rise time/fall time | 2 ms |
| Voltage_3 | U 5 V |
| Internal inductance_1 | L 0 mH |
| Control drawing | 116-0349 (cULus) |
| Electromagnetic compatibility | NE 21:2012 EN 61326-3-2:2008 |
| Maximum safe voltage_1 | U 250 V (Attention! The rated voltage can be lower.) |
| Coding | pin 2 and 3 trimmed For further information see system description. |
| Equipment | SL2: 5a(+), 5b(-) |
| Safety Integrity Level (SIL) | SIL 2 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| IECEx certificate | IECEx BAS 13.0042X |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I |
| Influence of ambient temperature | current output: 0.25 µA/K voltage output: 80 µV/K |
| Voltage_1 | U 28.2 V |
| Current_1 | I 115 mA |
| Current_2 | I 6.8 mA |
| Power_2 | P 1.6 mW |
| Mounting | on termination board |
| Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Height | 106 mm |
| Depth | 128 mm |
| Power_1 | P 700 mW |
| Degree of protection | IP20 |
| Connection side | control side |
| Connection | SL1: 8a(+), 7a(-), channel 1: source and sink SL1: 10a(+), 9a(-), channel 2: source and sink |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Width | 12.5 mm |
| UL approval | E106378 |
| Power consumption | 2 W |
| Short-circuit current | SL2: 5a(+), 5b(-): 25 mA |
| Current | I 93 mA |
| Input resistance | SL2: 5a(+), 5b(-): max. 500 Ω (BRAIN) (250 Ω load) |
| Output signal | 0/4 ... 20 mA or 0/1 ... 5 V |
| Internal inductance | L 0 mH |
| Rated voltage | U 20 ... 30 V DC bus powered via Termination Board |
| Rated current | I ≤ 90 mA |
| Voltage | U 25.2 V |
| Display elements | LED |
| Labeling | space for labeling at the front |
| Control elements | DIP switch |
| Configuration | via DIP switches |
| Available voltage | SL2: 5a(+), 5b(-): ≥ 16 V at 20 mA , ≥ 18.5 V at 4 mA |
| Internal capacitance | C 12 nF |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Signal type | Analog input |
| Power dissipation | approx. 1.4 W at 20 mA transfer current, 250 Ω in both outputs |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Input signal | 0/4 ... 20 mA |
| Deviation | I < 20 µA (0.1 %); V < 10 mV (0.2 %) incl. calibration, linearity, hysteresis and fluctuation of supply voltage, at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V |
| Equipment_1 | SL2: 1a(+), 1b(-), 7a(-) |
| Factory setting | output: current source |
| Output/Output | functional insulation, rated insulation voltage 50 V AC |
| Certificate | BASEEFA 13 ATEX 0076 X |
| Load | channel 1: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V) channel 2: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V) |
| Power | P 656 mW |
| Systematic capability (SC) | SC 3 |
| Voltage_2 | U 30 V |
