商品名称： P+F 倍加福 KFD2-GUT-Ex1.D SIL-Capable Products for Hazardous Areas Safety Integrity Level 2
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： KFD2-GUT-Ex1.D
产品参数
| Signal type | Analog input |
| Contact loading | 50 V AC/2 A/cos φ > 0.7; 40 V DC/1 A resistive load |
| Mechanical life | 5 x 10 switching cycles |
| Labeling | space for labeling at the front |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Current | I 8 mA |
| Power dissipation/power consumption | ≤ 2 W / 2.2 W |
| Programming interface | programming socket |
| Output III | Analog current output |
| Control elements | Control panel |
| Input | Ex ia |
| Power | P 67 mW |
| Types of measuring | 2-, 3-, 4-wire technology |
| Cold junction compensation | external and internal |
| Types of measuring_1 | 2-, 3-, 5-wire technology |
| Rated voltage | U 20 ... 30 V DC |
| Rated current | I approx. 100 mA |
| Display elements | LEDs , display |
| Electromagnetic compatibility | NE 21:2007 |
| Marking_1 | II 3G Ex nA nC IIC T4 Gc |
| Collective error message | Power Rail |
| RTD | max. 0.2 % of span |
| Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Voltage | U 13.1 V |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Certificate | PF 08 CERT 1213 X |
| Output III/power supply and collective error | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Height | 119 mm |
| Current I | 21 mA |
| Thermocouples | max. 10µV deviation of CJC: ±0.8 K |
| Inputs | terminals 1, 2, 3, 4, 6 (for passive equipment) |
| Current output | max. 20 µA |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Width | 40 mm |
| Input_1 | terminals 2, 6 (for active equipment) |
| Connection | screw terminals |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I |
| Output I, II | relay |
| Load | max. 650 Ω |
| Lead resistance | max. 50 Ω |
| Measurement loop monitoring | sensor breakage, sensor short-circuit |
| Power_1 | P 200 mW |
| Output I, II against eachother | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Degree of protection | IP20 |
| Mass | 300 g |
| IECEx certificate | IECEx TUN 09.0019 |
| Configuration | via operating buttons via PACTware |
| Depth | 115 mm |
| Measurement loop monitoring_1 | sensor breakage |
| Input/Other circuits | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Temperature effect | Input: 0.005 %/K (50 ppm) of span ; current output: 0.005 %/K (50 ppm) of span |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| EU-type examination certificate | TÜV 03 ATEX 2140 |
| Connection side | control side |
| Measuring current | approx. 400 µA with resistance measuring sensor |
| Input resistance | ≥ 250 kΩ (0 ... 10 V) min. 1 MΩ (0 ... 1 V, -100 ... 100 mV) |
| Voltage_1 | U 29 V |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2 |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 |
| Current range | 0 ... 20 mA or 4 ... 20 mA |
| Fault signal | downscale I ≤ 3.6 mA, upscale I ≥ 21 mA (acc. NAMUR NE43) |
| Voltage U | 13.1 V |
| Power P | 67 mW |
| Maximum safe voltage_2 | U 40 V (Attention! The rated voltage can be lower.) , RS 232 |
| Interface/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Current_1 | I 11 mA |
| Safety Integrity Level (SIL) | SIL 2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Open loop voltage | max. 24 V DC |
| Output I, II/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Maximum safe voltage_1 | U 40 V (Attention! The rated voltage can be lower.) |
| Sampling rate | approx. 700 ms |
| Maximum safe voltage | U 40 V DC (Attention! The rated voltage can be lower.) |
| Potentiometer | 0.1 % of span when < 5 kΩ 0.5 % of span when > 5 kΩ |
