商品名称： P+F 倍加福 KFD2-VM-Ex1.35.L 本质安全型隔离栅 K-System (DIN rail mounting)
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： KFD2-VM-Ex1.35.L
产品参数
| Power dissipation | typ. 1.2 W |
| Power | P 423.5 mW (linear characteristic) |
| Switching frequency | 15 Hz |
| Response delay | 5 ... 30 ms (typical 10 ms) |
| Rated voltage | U 20 ... 30 V DC |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Degree of protection | IP20 |
| Mass | approx. 120 g |
| Rated current | I ≤ 52 mA |
| Ripple | ≤ 10 % |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Output signal | These values are valid for the rated operating voltages from 20 ... 30 V DC. |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 |
| Current | I 67.2 mA |
| Output/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Marking | II (1)GD [Ex ia] IIC [circuit(s) in zone 0/1/2] |
| EU-type examination certificate | PTB 00 ATEX 2132 |
| Maximum safe voltage | U 253 V AC/125 V DC without jumper 10-11, 60 V with jumper 10-11 (Attention! U is no rated voltage.) |
| Input/power supply | not available |
| Power consumption | < 1.5 W |
| Limit | current I : ≥ 17 mA; typ. 18 mA voltage U : ≥ 15.3 V; typ. 16 V |
| Electromagnetic compatibility | NE 21:2012 |
| Dimensions | 20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| Connection side | field side |
| Voltage | U 25.2 V DC |
| Output current | 17 mA |
| Maximum safe voltage_1 | U 60 V (Attention! U is no rated voltage.) |
| Internal resistor | R max. 410 Ω |
| Connection | screw terminals |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Signal type | Digital Output |
| Open loop voltage | U min. 22.3 V |
| Signal level | 1-signal: 15 ... 30 V DC ; input current: approx. 2.3 mA at 24 V DC 0-signal: 0 ... 5 V DC or open input |
| Output | Ex ia |
