商品名称： P+F 倍加福 HiC2821 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： HiC2821
产品参数
| Degree of protection | IP20 |
| Mechanical life | 10 switching cycles |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Input | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Output type | open collector transistor (internal fault bus) |
| Rated voltage | U 19 ... 30 V DC bus powered via Termination Board |
| Rated current | I ≤ 30 mA |
| EU-type examination certificate | BASEEFA 06 ATEX 0093 X |
| Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms |
| Output/Output | basic insulation acc. to EN 50178, rated insulation voltage of 50 V AC |
| Certificate | PF 08 CERT 1047 X |
| Width | 12.5 mm |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 |
| Signal type | Digital Input |
| Display elements | LEDs |
| Electromagnetic compatibility | EN IEC 61326-3-2:2018 , NE 21:2012 For further information see system description. |
| Minimum switch current | 2 mA / 24 V DC |
| Dimensions | 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D) |
| Marking_1 | II 3G Ex nA nC IIC T4 Gc |
| IECEx marking | [Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I |
| Line fault detection | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.7 mA |
| Output I | signal ; relay |
| Control drawing | 16-534FM-12 (cFMus) |
| Control drawing_1 | 116-0434 |
| Configuration | via DIP switches |
| Rated values | acc. to EN 60947-5-6 (NAMUR), see manual for electrical data |
| Galvanic isolation | EN 50178:1997 |
| Coding | pin 1 and 2 trimmed For further information see system description. |
| Height | 106 mm |
| Ripple | ≤ 10 % |
| Safety Integrity Level (SIL) | SIL 2 |
| Mass | approx. 100 g |
| UL approval | E106378 |
| Power | P 45 mW (linear characteristic) |
| Power consumption | ≤ 500 mW |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mounting | on termination board |
| Connection side | control side |
| Labeling | space for labeling at the front |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Current | I 17.1 mA |
| Maximum safe voltage | U 253 V AC (Attention! U is no rated voltage.) |
| IECEx certificate | IECEx BAS 06.0026X |
| Control elements | DIP switch |
| Depth | 128 mm |
| Output II | signal or fault message ; relay |
| Output/power supply | basic insulation acc. to EN 50178, rated insulation voltage of 50 V AC |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Power dissipation | ≤ 500 mW |
| Contact loading | 50 V DC / 0.5 A |
| Switching frequency | ≤ 10 Hz |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Maximum safe voltage_1 | U 253 V AC (Attention! The rated voltage can be lower.) |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Voltage | U 10.5 V |
| Connection | SL1: 6b |
| Pulse/Pause ratio | min. 20 ms / min. 20 ms |
