商品名称： P+F 倍加福 S1SD-1DI-1R 信号调节器 SC-System (DIN rail, compact design)
品牌名称： P+F 倍加福
分类名称： 其他过程测量仪表
商品订货号：
商品型号： S1SD-1DI-1R
产品参数
| Signal type | Digital Input |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Protection against electrical shock | EN 61010-1:2010 |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Type_1 | 2-wire |
| Connection_1 | terminals 5+, 6 |
| Sensor supply_2 | 8 V |
| Input impedance_2 | 1 kΩ |
| Type_3 | 2-wire |
| Type_5 | 3-wire |
| Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
| Configuration | via DIP switches |
| Signal | acc. to EN 60947-5-6 (NAMUR) |
| Sensor supply | 8 V |
| Energized/De-energized delay | ≤ 20 ms / ≤ 20 ms |
| Labeling | space for labeling at the front |
| Degree of protection | IP20 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Open-circuit | < 0.1 mA |
| Connection_3 | terminals 5+, 6 |
| Switching point_3 | 2 ... 5 mA |
| External supply_2 | ≤ 32 V |
| Type_6 | 3-wire |
| Connection_6 | terminals 5+, 6, 7- |
| Signal_6 | 115 V AC/DC |
| Contact loading | 253 V AC/2 A/cos φ > 0.7; 126.5 V AC/2 A/cos φ > 0.7; 30 V DC/2 A resistive load |
| Mechanical life | 10 switching cycles |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Type_2 | 2-wire |
| External supply_1 | ≤ 32 V |
| Sensor supply_4 | 15 V |
| Signal_3 | acc. to EN 60947-5-2 |
| Power dissipation | 0.6 W |
| Connection_2 | terminals 5+, 6 |
| Switching point_5 | 3 ... 5 V |
| Signal_4 | acc. to EN 60947-5-2 |
| Switching point_9 | 80 ... 115 V |
| Output | signal, relay |
| Connection side | control side |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Dimensions | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1 |
| Open-circuit_1 | < 0.1 mA |
| Short-circuit_1 | > 6 mA |
| Signal_2 | acc. to EN 62053-31 , Type B |
| Power consumption | 1.1 W |
| Height | 97 mm |
| Width | 6.2 mm |
| Core cross section | 0.5 ... 2.5 mm (20 ... 14 AWG) |
| Switching point_1 | 8 ... 10 V / 1.2 ... 2.1 mA |
| Switching point_2 | 1.2 ... 2.1 mA |
| External supply_3 | ≤ 32 V |
| Connection_7 | terminals 7, 8 |
| Signal_5 | 24 V AC/DC |
| Signal_7 | 230 V AC/DC |
| Input/Other circuits | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V test voltage 3 kV, 50 Hz, 1 min |
| Sensor supply_3 | 16 V / 25 mA , short-circuit protected |
| Type_4 | 2-wire |
| Switching point_4 | 0.15 ... 2 mA |
| Connection_5 | terminals 5+, 6, 7- |
| Input impedance_5 | 4 kΩ |
| Sensor supply_6 | 16 V / 25 mA , short-circuit protected |
| Switching point_6 | 8 ... 10 V |
| Switching point_7 | 10 ... 15 V |
| Input impedance_9 | > 680 kΩ |
| Connection | screw terminals |
| Rated voltage | U 16.8 ... 31.2 V DC |
| Output/power supply | safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V test voltage 3 kV, 50 Hz, 1 min |
| Type | 2-wire |
| Switching point | 1.2 ... 2.1 mA |
| External supply | ≤ 32 V |
| Input impedance_1 | 4 kΩ |
| Input impedance_3 | 1 kΩ |
| Input impedance_6 | 4 kΩ |
| Connection_8 | terminals 7, 8 |
| Input impedance_8 | > 680 kΩ |
| Connection_9 | terminals 7, 8 |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Mass | approx. 60 g |
| Depth | 107 mm |
| Short-circuit | > 6 mA |
| Input impedance | 1 kΩ |
| Sensor supply_1 | 15 V |
| Signal_1 | acc. to EN 60947-5-2 |
| Connection_4 | terminals 5+, 6 |
| Input impedance_4 | 4 kΩ |
| Sensor supply_5 | 16 V / 25 mA , short-circuit protected |
| Switching point_8 | 40 ... 60 V |
| Switching frequency | ≤ 10 Hz |
| Input impedance_7 | > 680 kΩ |
| Minimum switch current | 2 mA / 24 V DC |
