商品名称： P+F 倍加福 KCD2-STC-1.2O 信号调节器 K-System (DIN rail, highly functional)
商品型号： KCD2-STC-1.2O
品牌名： P+F 倍加福
分类： 模块
订货号：
类型： 信号转换模块
|
| Systematic capability (SC) |
SC 3 |
| Power consumption |
2 W |
| Influence of ambient temperature |
current output: 0.25 µA/K voltage output: 80 µV/K |
| Labeling |
space for labeling at the front |
| Connection |
screw terminals |
| Ripple |
max. 50 µA |
| Frequency range |
field side into the control side: bandwidth with 0.5 V signal 0 ... 7.5 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V signal 0.3 ... 7.5 kHz (-3 dB) |
| Supplementary information |
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Signal type |
Analog input |
| Rated voltage |
U 19 ... 30 V DC |
| Available voltage |
terminals 1+, 2-: ≥ 16 V at 20 mA , ≥ 18.5 V at 4 mA |
| Settling time |
6 ms |
| Output/power supply |
functional insulation, rated insulation voltage 50 V AC |
| Mass |
approx. 100 g |
| Configuration |
via DIP switches |
| Output signal |
0/4 ... 20 mA or 0/1 ... 5 V |
| Input/Output |
basic insulation according to IEC 61010-1, rated insulation voltage 300 V |
| Directive 2014/30/EU |
EN 61326-1:2013 (industrial locations) |
| Dimensions |
12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2 |
| Mounting |
on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Short-circuit current |
terminals 1+, 2-: 25 mA |
| Power dissipation |
approx. 1.4 W at 20 mA transfer current, 250 Ω in both outputs |
| Display elements |
LED |
| Load |
channel 1: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V) channel 2: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V) |
| Safety Integrity Level (SIL) |
SIL 2 |
| Input resistance |
terminals 1+, 2-: max. 500 Ω (BRAIN) (250 Ω load) |
| Degree of protection |
IP20 |
| Ambient temperature |
-20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions |
| Voltage drop |
terminals 3, 4: ≤ 6.1 V at 20 mA |
| Note |
Both output loads must be connected to ensure complete and correct operation within the technical specification. |
| Input signal |
0/4 ... 20 mA |
| Deviation |
I < 20 µA (0.1 %); V < 7.5 mV (0.15 %) incl. calibration, linearity, hysteresis and fluctuation of supply voltage, at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V |
| Output/Output |
functional insulation, rated insulation voltage 50 V AC |
| Width |
12.5 mm |
| Protection against electrical shock |
UL 61010-1:2012 |
| Depth |
114 mm |
| Connection side |
control side |
| Rise time/fall time |
2 ms |
| Input/power supply |
basic insulation according to IEC 61010-1, rated insulation voltage 300 V |
| Electromagnetic compatibility |
NE 21:2012 EN 61326-3-2:2008 |
| Height |
124 mm |
|
商品名称： P+F 倍加福 HiC5861 本质安全型隔离栅 H-System (Termination Board mounting)
商品型号： HiC5861
品牌名： P+F 倍加福
分类： 继电器
订货号：
类型： 继电器
|
| UL approval |
E106378 |
| Minimum switch current |
10 mA / 24 V DC |
| Fuse rating |
1.5 A |
| Degree of protection |
IP20 |
| Dimensions |
12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D) |
| Marking |
II 3G Ex nC ec IIC T4 Gc |
| Coding |
no pin trimmed For further information see system description. |
| Power dissipation |
< 1.3 W |
| Energized/De-energized delay |
150 ms / 150 ms |
| Certificate |
PF 17 CERT 4192 X |
| Supplementary information |
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Rated current |
I 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card) |
| Output/Output |
reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 V |
| Signal level |
0-signal: -5 ... 5 V 1-signal: 19 ... 27.6 V |
| Rated voltage |
U 19 ... 27.6 V loop powered |
| Mounting |
on termination board |
| Connection side |
field side |
| Performance level (PL) |
PL e |
| Contact loading |
30 V DC/1 A resistive load |
| Electromagnetic compatibility |
NE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008 |
| Mass |
approx. 100 g |
| Directive 2014/35/EU |
EN 61010-1:2010 |
| Mechanical life |
2 x 10 switching cycles |
| Test pulse length |
max. 4 ms from DO card |
| Labeling |
space for labeling at the front |
| Input/Output |
reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 253 V |
| Safety Integrity Level (SIL) |
SIL 3 |
| Test input |
see functional safety manual |
| Directive 2014/30/EU |
EN 61326-1:2013 (industrial locations) |
| Ambient temperature |
-20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating. |
| Height |
106 mm |
| Width |
12.5 mm |
| Depth |
128 mm |
| Switching frequency |
< 3 Hz |
| Power consumption |
< 1.3 W |
| Connection |
SL2: 5a, 5b |
| Pulse/Pause ratio |
150 ms / 150 ms |
| Directive 2006/42/EC |
EN 62061:2005 , EN/ISO 13849-1:2008 |
| Directive 2014/34/EU |
EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-15:2010 |
| Signal type |
Digital Output |
| Display elements |
LEDs |
|
商品名称： P+F 倍加福 KFD0-CS-2.50 信号调节器 K-System (DIN rail, highly functional)
商品型号： KFD0-CS-2.50
品牌名： P+F 倍加福
分类： 安全传感器
订货号：
类型： 隔离栅
|
| Mass |
approx. 100 g |
| Depth |
115 mm |
| Current |
4 ... 20 mA |
| Degree of protection |
IP20 |
| Influence of ambient temperature |
≤ ± 2 µA/K at U ≤ 20 V; ≤ ± 5 µA/K at U > 20 V |
| Input/Output |
basic insulation according to IEC 62103, rated insulation voltage 300 V |
| Rise time |
≤ 5 ms at 4 ... 20 mA and U = input voltage < 26 V |
| Signal type |
Analog input/analog output |
| Safety Integrity Level (SIL) |
SIL 2 |
| Labeling |
space for labeling at the front |
| Electromagnetic compatibility |
NE 21:2012 EN 61326-3-2:2008 |
| Transfer current |
max. 25 mA |
| Rated voltage |
U 10 ... 35 V DC , loop powered |
| Mounting |
on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Power dissipation |
< 150 mW per channel at 25 mA and U < 26.1 V < 400 mW per channel at 25 mA und U > 26.1 V |
| Height |
107 mm |
| Ambient temperature |
-20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions |
| Dimensions |
20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| Accuracy |
0.1 % |
| Connection |
screw terminals |
| Width |
20 mm |
| After calibration |
U ≥ 5 V ± 20 µA/U ≤ 5 V ± 50 µA incl. calibration, linearity, hysteresis and output load fluctuations at the field side; at 20 °C (68 °F) |
| Directive 2014/30/EU |
EN 61326-1:2013 (industrial locations) |
| Protection against electrical shock |
EN 61010-1:2010 |
| Supplementary information |
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Voltage |
≥ 0.9 x U - (0.23 x current in mA) - 0.7 for 10 V < U < 26.1 V ≥ 23 V - (0.23 x current in mA) for U > 26.1 V |
| Short-circuit current |
max. 100 mA |
|
商品名称： P+F 倍加福 KFD0-CS-Ex1.54-Y2 本质安全型隔离栅 K-System (DIN rail mounting)
商品型号： KFD0-CS-Ex1.54-Y2
品牌名： P+F 倍加福
分类： 安全传感器
订货号：
类型： 安全栅
|
| Voltage |
U 25.2 V |
| Control drawing_1 |
116-0348 (cULus) |
| Protection against electrical shock |
UL 61010-1 |
| Ambient temperature |
-20 ... 60 °C (-4 ... 140 °F) |
| Input/Output |
safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Connection |
screw terminals |
| Labeling |
space for labeling at the front |
| Height |
107 mm |
| Marking_1 |
II 3G Ex nA II T4 |
| Influence of ambient temperature |
± 20 µA / K |
| Short-circuit current |
≤ 43 mA |
| Electromagnetic compatibility |
NE 21:2006 |
| Certificate |
TÜV 99 ATEX 1499 X |
| IECEx marking |
[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex nA IIC T4 Gc |
| Signal type |
Analog input |
| Depth |
115 mm |
| Mass |
approx. 100 g |
| Dimensions |
20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1 |
| Rise time/fall time |
≤ 50 µs (load current ≥ 1 mA) |
| Rated voltage |
U 0 ... 24 V DC , loop powered |
| Marking |
II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Directive 2014/34/EU |
EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 |
| IECEx certificate |
IECEx BAS 08.0079 IECEx BAS 10.0007X |
| Transmission range |
current: 1 ... 20 mA voltage: 0 ... 24 V |
| Degree of protection |
IP20 |
| Supplementary information |
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| After calibration |
≤ 3.5 mA current loss at 20 mA load current |
| Current |
I 43 mA |
| Directive 2014/30/EU |
EN 61326-1:2013 (industrial locations) |
| UL approval |
E106378 |
| Width |
20 mm |
| Maximum safe voltage |
U 250 V (Attention! The rated voltage can be lower.) |
| Power dissipation |
0.2 W |
| Mounting |
on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-type examination certificate |
BAS 00 ATEX 7087 |
| Control drawing |
116-0129 (cFMus) |
| Power |
P 271 mW |
|
商品名称： P+F 倍加福 KFD2-ER-Ex1.W.LB 本质安全型隔离栅 K-System (DIN rail mounting)
商品型号： KFD2-ER-EX1.W.LB
品牌名： P+F 倍加福
分类： 安全传感器
订货号：
类型： 隔离栅
|
| Configuration |
via DIP switches via potentiometer |
| Electromagnetic compatibility |
NE 21:2006 |
| Mass |
approx. 150 g |
| Supplementary information |
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Input |
[EEx ia] IIC |
| Ambient temperature |
-20 ... 60 °C (-4 ... 140 °F) |
| Directive 2014/35/EU |
EN 61010-1:2010 |
| Switching power |
max. 192 W , 2000 VA |
| Degree of protection |
IP20 |
| Marking |
II (1)G [EEx ia] IIC [circuit(s) in zone 0/1/2] |
| Height |
119 mm |
| Time constant for signal damping |
0.5 s, 2 s, 5 s, 10 s |
| Directive 2014/34/EU |
EN 60079-0:2012+A11:2013, EN 60079-11:2012 |
| Output/power supply |
reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Output |
signal ; relay |
| Response sensitivity |
1 ... 150 kΩ , adjustable via potentiometer |
| Rated voltage |
U 20 ... 30 V DC |
| Control elements |
DIP switch potentiometer |
| Directive 2014/30/EU |
EN 61326-1:2013 (industrial locations) |
| Mounting |
on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Maximum safe voltage |
U 40 V DC (Attention! U is no rated voltage.) |
| Current |
I 2.5 mA |
| Power |
P 6 mW |
| Input/power supply |
safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Labeling |
space for labeling at the front |
| Signal type |
Digital Input |
| Width |
20 mm |
| Voltage |
U 10 V |
| Rated current |
I 30 ... 40 mA |
| Contact loading |
253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load |
| Dimensions |
20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 |
| Input/Output |
safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| EU-type examination certificate |
DMT 00 ATEX E 033 |
| Control input |
min./max. control system: terminals 1, 2, 3 on/off control system: terminals 1, 3 |
| Connection |
screw terminals , max. 2.5 mm |
| Display elements |
LEDs |
| Connection side |
control side |
| Depth |
115 mm |
|
|
商品名称： P+F 倍加福 KFD2-EB2.SP 本质安全型隔离栅 K-System (DIN rail mounting)
商品型号： KFD2-EB2.SP
品牌名： P+F 倍加福
分类： 安全传感器
订货号：
类型： 隔离栅
|
| Mounting |
on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Fusing |
5 AT/250 V AC recommended maximum utilization of the fuse: 80 % |
| Labeling |
space for labeling at the front |
| Directive 2014/34/EU |
EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN IEC 60079-15:2019 |
| Rated voltage |
U 20 ... 30 V DC The maximum rated operating voltage of the devices plugged onto the Power Rail must not be exceeded. |
| Display elements |
LEDs |
| Configuration |
via DIP switches |
| IECEx certificate |
IECEx UL 16.0051X |
| IECEx marking |
Ex ec nC IIC T4 Gc |
| Supplementary information |
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Electromagnetic compatibility |
NE 21:2017 |
| Degree of protection |
IP20 |
| Output voltage |
U ≥ rated voltage U = U - 0.6 V |
| Control elements |
DIP switch |
| Ambient temperature |
-40 ... 70 °C (-40 ... 158 °F) |
| Dimensions |
20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 |
| UL approval |
E106378 |
| Fault signal |
relay output: NO contact |
| Directive 2014/30/EU |
EN 61326-1:2013 (industrial locations) |
| Certificate |
UL 22 ATEX 2853 X |
| Marking |
II 3G Ex ec nC IIC T4 Gc |
| Contact loading |
30 V AC/ 2 A / cos φ ≥ 0.7 ; 40 V DC/ 2 A |
| Energized/De-energized delay |
approx. 20 ms / approx. 20 ms |
| Power dissipation |
≤ 1 W |
| Output current |
max. 4 A |
| FM approval |
FM 22 US 0031 X |
| Control drawing |
116-0160 |
| Connection |
spring terminals |
| Mass |
approx. 100 g |
| CSA approval |
CoC 1051840 |
|
商品名称： P+F 倍加福 KFD2-ER-2.W.LB 信号调节器 K-System (DIN rail, highly functional)
商品型号： KFD2-ER-2.W.LB
品牌名： P+F 倍加福
分类： 安全传感器
订货号：
类型： 隔离栅
|
| Labeling |
space for labeling at the front |
| Electromagnetic compatibility |
NE 21:2006 |
| Width |
20 mm |
| Depth |
115 mm |
| Supplementary information |
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Configuration |
via DIP switches via potentiometer |
| Control input |
min./max. control system: terminals 1, 2, 3; 4, 5. 6 on/off control system: terminals 1, 3; 4, 6 |
| Directive 2004/108/EC |
EN 61326-1:2006 |
| Rated voltage |
U 20 ... 30 V DC |
| Input/Output |
basic insulation according to EN 50178, rated insulation voltage 253 V |
| Mass |
approx. 150 g |
| Signal type |
Digital Input |
| Display elements |
LEDs |
| Dimensions |
20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2 |
| Input/power supply |
basic insulation according to EN 50178, rated insulation voltage 253 V |
| Ambient temperature |
-20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions |
| Connection |
screw terminals , max. 2.5 mm |
| Mounting |
on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Height |
119 mm |
| Output |
relay |
| Contact loading |
253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load |
| Rated current |
I 30 ... 40 mA |
| Output/power supply |
basic insulation according to EN 50178, rated insulation voltage 253 V |
| Degree of protection |
IP20 |
| Galvanic isolation |
EN 50178:1997 |
| Response sensitivity |
1 ... 150 kΩ , adjustable via potentiometer |
| Switching power |
max. 192 W , 2000 VA |
| Time constant for signal damping |
0.5 s, 2 s, 5 s, 10 s |
| Connection side |
control side |
| Insulation coordination |
EN 50178:1997 |
| Directive 2006/95/EC |
EN 50178:1997 |
|
商品名称： P+F 倍加福 K-ADP-USB 本质安全型隔离栅 K-System (DIN rail mounting)
商品型号： K-ADP-USB
品牌名： P+F 倍加福
分类： 传感器附件
订货号：
类型： 电缆及适配器
|
| Computer |
1 x Type A USB |
| Mass |
85 g |
| Device |
1 x connector 3.5 mm and 3.55 mm |
| Cable length |
3 m |
| Ambient temperature |
-20 ... 60 °C (-4 ... 140 °F) |
| Galvanic isolation |
functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Directive 2014/30/EU |
EN 61000-3-2:2014 EN 61000-3-3:2013 EN 61000-4-2:2009 EN IEC 61000-4-3:2020 EN 61000-4-4:2012 EN 61000-4-6:2014 EN 61000-4-8:2010 EN 55032:2015+A11:2020 |
| Current consumption |
50 mA (via USB) |
|
商品名称： P+F 倍加福 PCV80S-F200-SSI-V19 Vision Sensors 定位系统
商品型号： PCV80S-F200-SSI-V19
品牌名： P+F 倍加福
分类： 视觉传感器
订货号：
类型： 读码器
|
| 数字分辨率 |
32 Bit |
| “常开位置”X 值 |
0 |
| 数据内容 |
X 位置 ， 状态 |
| 类型 |
CMOS ， 全局快门 |
| 空载电流 |
I 最大 200 mA |
| 输出类型 |
1 至 2 路开关输出 ， PNP ， 可编程 ， 短路保护 |
| UL 认证 |
cULus 认证，一般用途，2 类电源，1 类外壳 |
| SSI 编码 |
数字 |
| 景深 |
± 15 mm |
| LED 指示 |
7 个 LED（通信、辅助对齐、状态信息） |
| 数据输出码 |
格雷码，二进制码 ，可编程 |
| 传输速率 |
38,4 ... 460,8 kBit/s |
| 外壳 |
PC/ABS |
| 深度 |
50 mm |
| “常开位置”速度值 |
127 |
| 功能输入/输出 |
熄灭 |
| 读取距离 |
80 mm |
| 读取区域 |
40 mm x 25 mm |
| 查询循环时间 |
≥ 1 ms |
| 输入阻抗 |
26 kΩ |
| 光生物安全性 |
免除组 根据 EN 62471:2008 |
| 抗扰度 |
EN 61000-6-2:2005 |
| 连接类型 |
8 针 M12 x 1 连接器 |
| 出现错误时的 Y 值 |
错误编号 |
| 暂停时间 |
tp ≥ 20 µs 可进行双重请求，如果 t ≤ 10 µs |
| 时钟脉冲频率 |
600 MHz |
| 任务时间 (T |
) 10 a |
| 接口类型 |
USB （串行通信端口） |
| 工作温度 |
0 ... 60 °C (32 ... 140 °F) -20 ... 60 °C (-4 ... 140 °F) 根据请求，可扩展至 -25 °C （无冷凝；防止透镜上结冰！） |
| 相对湿度 |
90 % ，无冷凝 |
| 宽度 |
70 mm |
| 通过速度 |
v ≤ 12,5 m/s |
| MTTF |
93 a |
| 诊断覆盖率 (DC) |
0 % |
| 开关电压 |
工作电压 |
| 抗振性 |
EN 60068-2-6:2008 |
| 质量 |
大约 160 g |
| 高度 |
70 mm |
| 出现错误时的速度值 |
错误编号 |
| 编码带宽度 |
两行 |
| 光源类型 |
内置 LED 灯 （红） |
| 扫描速率 |
100 s |
| 工作电压 |
U 15 ... 30 V DC ， PELV |
| 输入类型 |
1 至 2 路功能输入 ， 可编程 |
| CE 符合性 |
CE |
| CCC 认证 |
额定电压 ≤ 36 V 时，产品不需要 CCC 认证/标记 |
| “常开位置”Y 值 |
0 |
| 超速阈值（协议） |
12,5 m/s |
| 协议 |
8E1 |
| 分辨率 |
± 0,1 mm |
| UKCA 符合性 |
UKCA |
| 计算速度 |
4800 MIPS |
| 防护等级 |
IP67 |
| X 分辩率（协议） |
1 mm |
| X 位置偏移 |
0 mm |
| 单稳态触发时间 |
T = 10 µs |
| 开关电流 |
150 mA 每个输出 |
| 发射干扰 |
EN 61000-6-4:2007+A1:2011 |
| 编码带方向 |
0 ° |
| 出现错误时的 X 值 |
错误编号 |
| 时钟频率 |
100 ... 1000 kHz |
| 测量范围 |
最大 10000 m |
| 环境光限制 |
100000 Lux |
| 功耗 |
P 3 W |
| 耐冲击性 |
EN 60068-2-27:2009 |
| 存储温度 |
-25 ... 85 °C (-13 ... 185 °F) |
| Y 分辩率（协议） |
1 mm |
|
商品名称： P+F 倍加福 PCV50-F200-SSI-V19 Vision Sensors 定位系统
商品型号： PCV50-F200-SSI-V19
品牌名： P+F 倍加福
分类： 视觉传感器
订货号：
类型： 读码器
|
| 环境光限制 |
100000 Lux |
| 数字分辨率 |
32 Bit |
| 接口类型 |
USB （串行通信端口） |
| 工作温度 |
0 ... 60 °C (32 ... 140 °F) ， -20 ... 60 °C (-4 ... 140 °F) （无冷凝；防止透镜上结冰！） |
| 连接类型 |
8 针 M12 x 1 连接器 |
| 工作电压 |
U 15 ... 30 V DC ， PELV |
| 功耗 |
P 3 W |
| 数据内容 |
X 位置 ， 状态 |
| MTTF |
93 a |
| 输入类型 |
1 至 2 路功能输入 ， 可编程 |
| 抗扰度 |
EN 61000-6-2:2005 |
| 存储温度 |
-20 ... 85 °C (-4 ... 185 °F) |
| “常开位置”Y 值 |
0 |
| 超速阈值（协议） |
12,5 m/s |
| X 位置偏移 |
0 mm |
| 空载电流 |
I 最大 200 mA |
| 耐冲击性 |
EN 60068-2-27:2009 |
| 高度 |
70 mm |
| 宽度 |
70 mm |
| “常开位置”速度值 |
127 |
| 功能输入/输出 |
熄灭 |
| 读取区域 |
60 mm x 40 mm |
| 类型 |
CMOS ， 全局快门 |
| 诊断覆盖率 (DC) |
0 % |
| 开关电流 |
150 mA 每个输出 |
| 外壳 |
PC/ABS |
| “常开位置”X 值 |
0 |
| SSI 编码 |
数字 |
| 光源类型 |
内置 LED 灯 （红） |
| 计算速度 |
4800 MIPS |
| 传输速率 |
38,4 ... 460,8 kBit/s |
| 输入阻抗 |
26 kΩ |
| 发射干扰 |
EN 61000-6-4:2007+A1:2011 |
| UL 认证 |
cULus 认证，一般用途，2 类电源，1 类外壳 |
| 景深 |
± 25 mm |
| 抗振性 |
EN 60068-2-6:2008 |
| 出现错误时的 X 值 |
错误编号 |
| 编码带宽度 |
两行 |
| 分辨率 |
± 0,1 mm |
| UKCA 符合性 |
UKCA |
| 读取距离 |
50 mm |
| 任务时间 (T |
) 10 a |
| 光生物安全性 |
免除组 根据 EN 62471:2008 |
| CE 符合性 |
CE |
| 相对湿度 |
90 % ，无冷凝 |
| 防护等级 |
IP67 |
| 质量 |
大约 160 g |
| Y 分辩率（协议） |
1 mm |
| 单稳态触发时间 |
T = 10 µs |
| 通过速度 |
v ≤ 12,5 m/s |
| 测量范围 |
最大 10000 m |
| LED 指示 |
7 个 LED（通信、辅助对齐、状态信息） |
| 输出类型 |
1 至 2 路开关输出 ， PNP ， 可编程 ， 短路保护 |
| CCC 认证 |
额定电压 ≤ 36 V 时，产品不需要 CCC 认证/标记 |
| 出现错误时的 Y 值 |
错误编号 |
| 暂停时间 |
tp ≥ 20 µs 可进行双重请求，如果 t ≤ 10 µs |
| 时钟脉冲频率 |
600 MHz |
| 数据输出码 |
格雷码，二进制码 ，可编程 |
| 查询循环时间 |
≥ 3 ms |
| 开关电压 |
工作电压 |
| 深度 |
50 mm |
| X 分辩率（协议） |
1 mm |
| 编码带方向 |
0 ° |
| 出现错误时的速度值 |
错误编号 |
| 时钟频率 |
100 ... 1000 kHz |
| 协议 |
8E1 |
|
