商品名称： P+F 倍加福 KFD2-SH-Ex1 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： KFD2-SH-Ex1
产品参数
| Input | Ex ia |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Power consumption | max. 2.3 W |
| Relay de-energized | I < 2.1 mA and I > 5.9 mA |
| Relay energized | 2.8 mA < I < 5.3 mA |
| Directive 2006/42/EC | EN/ISO 13849-1:2015 |
| Rated current | I ≤ 130 mA |
| Mass | approx. 280 g |
| Connection | screw terminals |
| Maximum safe voltage | U 40 V AC/DC (Attention! The rated voltage can be lower.) |
| Certificate | TÜV 99 ATEX 1493 X |
| Marking_1 | II 3G Ex ec nC IIC T4 Gc |
| Output I | relay , signal |
| Rated voltage | 10 ... 30 V DC |
| Degree of protection | IP20 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| EU-type examination certificate | PTB 00 ATEX 2042 |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Electromagnetic compatibility | NE 21:2017 , EN 61326-3-1:2017 |
| IECEx marking | Ex ec nC IIC T4 Gc |
| Mutual output I, II, III | basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V |
| Output/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Contact loading_1 | 50 V AC/1 A/cos φ > 0.7; 24 V DC/1 A resistive load |
| Maximum safe voltage_1 | U output I/output II: 253 V AC/DC (Attention! U is no rated voltage.) output III: 60 V AC/DC (Attention! U is no rated voltage.) |
| Power | P 41 mW (linear characteristic) |
| Output II | relay , signal |
| Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Contact loading | 50 V AC/1 A/cos φ > 0.7; 24 V DC/1 A resistive load |
| Response delay | ≤ 1 ms |
| Ripple | ≤ 10 % |
| Mechanical life_1 | 50 x 10 switching cycles |
| Labeling | space for labeling at the front |
| Current | I 16.8 mA |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019 |
| Safety | IEC/EN 61508:2010 |
| Dimensions | 40 x 107 x 115 mm (1.6 x 4.2 x 4.5 inch) (W x H x D) , housing type C1 |
| Voltage | U 9.56 V |
| Signal type | Digital Input |
| Power dissipation | 2.1 W |
| Display elements | LEDs |
| Systematic capability (SC) | SC 3 |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Control drawing | 116-0158 |
| Connection side | control side |
| Open circuit voltage/short-circuit current | approx. 8.4 V DC / approx. 11.7 mA |
| Signal level | 1-signal: (L+) -2.5 V (7 mA, short-circuit proof) / 0-signal: blocked output (Leakage current ≤ 10 µA) |
| Performance level (PL) | PL d |
| Safety Integrity Level (SIL) | SIL 3 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Mechanical life | 50 x 10 switching cycles |
| Switching frequency | 5 Hz |
| IECEx certificate | IECEx TUN 19.0013X |
| Output III | electronic output, passive , fault signal |
| Lead resistance | ≤ 50 Ω, in hazardous area cable capacitances and inductivities are to be taken into account |
