商品名称： P+F 倍加福 KFU8-CRG2-1.D 信号调节器 K-System (DIN rail, highly functional)
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号： 255623
商品型号： KFU8-CRG2-1.D
产品参数
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Height | 119 mm |
| Influence of ambient temperature_1 | 0.005 %/K (50 ppm) |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Output III | Signal, analog |
| Resolution | ≤ 10 µA |
| Output I, II/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Mutual output I, II, III | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Response delay | ≤ 200 ms at bounce from 0 ... 20 mA |
| Output III/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Display elements | LEDs , display |
| Electromagnetic compatibility | NE 21:2006 |
| Signal type | Analog input |
| Rated voltage | U 20 ... 90 V DC or 48 ... 253 V AC |
| Output signal | 0 ... 20 mA or 4 ... 20 mA |
| Power consumption | 2.2 W / 4 VA |
| Connection side | control side |
| Input signal | 0/4 ... 20 mA |
| Degree of protection | IP20 |
| Fault signal | downscale I ≤ 3.6 mA, upscale I ≥ 21.5 mA (acc. NAMUR NE43) |
| Mechanical life | 5 x 10 switching cycles |
| Line fault detection | breakage I < 0.2 mA; short-circuit I > 22 mA |
| Open loop voltage | max. 24 V DC |
| Input resistance | 45 Ω (terminals 2, 3) |
| Influence of ambient temperature | 0.003 %/K (30 ppm) |
| Labeling | space for labeling at the front |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mass | 300 g |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2 |
| Width | 40 mm |
| Depth | 115 mm |
| Accuracy | < 30 µA |
| Input/Other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Contact loading | 250 V AC / 2 A / cos φ ≥ 0.7 ; 40 V DC / 2 A |
| Energized/De-energized delay | 0 ... 250 s , adjustable |
| Reaction time | < 650 ms at bounce from 0 ... 20 mA at the input, 90 % of output full-scale value |
| Power dissipation | 2 W / 3 VA |
| Available voltage | > 15 V at 20 mA |
| Load | max. 650 Ω |
| Programming interface | programming socket |
| Configuration | via operating buttons via PACTware |
| Current range | 0 ... 20 mA or 4 ... 20 mA |
| Safety Integrity Level (SIL) | SIL 2 |
| Connection | screw terminals |
| Open circuit voltage/short-circuit current | 24 V / 33 mA |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Accuracy_1 | < 20 µA |
| Output I, II | signal, relay |
| Interface/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
