商品名称： P+F 倍加福 KFU8-CRG2-Ex1.D SIL-Capable Products for Hazardous Areas Safety Integrity Level 2
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： KFU8-CRG2-Ex1.D
产品参数
| Rated voltage | U 20 ... 90 V DC or 48 ... 253 V AC |
| Maximum safe voltage | U 253 V AC (Attention! The rated voltage can be lower.) |
| Output I, II | terminals 10, 11, 12; 16, 17, 18 non-intrinsically safe |
| Output III/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Equipment_2 | terminals 1+, 2 / 3- |
| Current_3 | I 112 mA |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| EU-type examination certificate | TÜV 01 ATEX 1701 |
| Contact loading | 253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load (TÜV 01 ATEX 1701) |
| IECEx certificate | IECEx TUN 09.0007 |
| Accuracy | < 30 µA |
| Mutual output I, II, III | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Width | 40 mm |
| Interface | RS 232 |
| Interface/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Connection side | control side |
| Mechanical life | 5 x 10 switching cycles |
| Voltage_2 | U 5 V |
| Current_1 | I 115 mA |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2 |
| Connection | screw terminals |
| Labeling | space for labeling at the front |
| Line fault detection | breakage I < 0.2 mA; short-circuit I > 22 mA |
| Fault signal | downscale I ≤ 3.6 mA, upscale I ≥ 21.5 mA (acc. NAMUR NE43) |
| Influence of ambient temperature | 0.003 %/K (30 ppm) |
| Response delay | ≤ 200 ms at bounce from 0 ... 20 mA |
| Configuration | via operating buttons via PACTware |
| Input | Ex ia |
| Input/Other circuits | safe galvanic isolation acc. to EN 50020, voltage peak value 375 V |
| Safety Integrity Level (SIL) | SIL 2 |
| Degree of protection | IP20 |
| Equipment | terminals 1+, 3- |
| Power_2 | P 720 mW |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Voltage | U 25.8 V |
| Power dissipation | 2 W / 3 VA |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Current | I 93 mA |
| IECEx marking | [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I |
| Open circuit voltage/short-circuit current | 24 V / 33 mA |
| Output III | terminals 8+, 7- non-intrinsically safe |
| Load | max. 650 Ω |
| Available voltage | > 15 V at 20 mA |
| Voltage_1 | U < 30 V |
| Voltage_3 | U 25.8 V |
| Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Signal type | Analog input |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Programming interface | programming socket |
| Accuracy_1 | < 20 µA |
| Influence of ambient temperature_1 | 0.005 %/K (50 ppm) |
| Depth | 115 mm |
| Input signal | 0/4 ... 20 mA |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Maximum safe voltage U | U 40 V (Attention! The rated voltage can be lower.) |
| Power | P 0.603 W |
| Input resistance | 45 Ω (terminals 2, 3) |
| Power_1 | P 0.3 mW |
| Control drawing | 16-554FM-12 (cFMus) |
| Energized/De-energized delay | 0 ... 250 s , adjustable |
| Display elements | LEDs , display |
| Control elements | Control panel |
| Maximum safe voltage_1 | U 253 V AC / 40 V DC (Attention! U is no rated voltage.) |
| Reaction time | < 650 ms at bounce from 0 ... 20 mA at the input, 90 % of output full-scale value |
| Equipment_1 | terminals 2-, 3 |
| Mass | 300 g |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 |
| Electromagnetic compatibility | NE 21:2006 |
| Current range | 0 ... 20 mA or 4 ... 20 mA |
| Open loop voltage | max. 24 V DC |
| Resolution | ≤ 10 µA |
| Output I, II/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Height | 119 mm |
| Maximum safe voltage_2 | U 40 V (Attention! The rated voltage can be lower.) , RS 232 |
| Power consumption | 2.2 W / 4 VA |
| Output signal | 0 ... 20 mA or 4 ... 20 mA |
| Current_2 | I 0.3 mA |
