商品名称： P+F 倍加福 K-LB-2.30 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3
品牌名称： P+F 倍加福
分类名称： 其他(中低压配电)
商品订货号：
商品型号： K-LB-2.30
产品参数
| Dimensions | 12.5 x 115 x 116 mm (0.5 x 4.5 x 4.6 inch) (W x H x D) |
| IECEx certificate | IECEx BAS 14.0010X |
| Internal capacitance | C negligible |
| Internal inductance | L 200 µH |
| Leakage current | < 5 µA at 24 V and 25 °C (77 °F) , line-line |
| Marking | II 2(1)G Ex ia IIC T6/T5/T4 |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 |
| Nominal discharge current (8/20 µs) | I 5 kA per line (10x) |
| Rated surge current (8/20 µs) | I 10 kA per line (1x) |
| Ambient temperature | -30 ... 80 °C (-22 ... 176 °F) For usage in hazardous area observe the EC-type examination certificate. |
| Topology | non-grounded |
| Series resistance | < 0.5 Ω per line |
| Safety Integrity Level (SIL) | SIL 3 |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Maximum continuous operating voltage | U 30 V DC |
| Mounting location | indoor |
| Number of protected signal lines | 4 |
| Width | 12.5 mm |
| Mass | approx. 100 g |
| EU-type examination certificate | PTB 00 ATEX 2176 X |
| Current | I 250 mA |
| Depth | 116 mm |
| Impulse discharge current (10/350 µs) | I 2 kA per line (2x) |
| Surge protective devices for low voltage | EN 61643-21:2001+A1:2009+A2:2013 IEC 61643-21:2001+A1:2008+A2:2012 |
| Rated current | I 250 mA |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Height | 115 mm |
| Voltage protection level | U max. 75 V line-line for nominal discharge current I max. 1.2 kV line-earth for nominal discharge current I |
| Voltage | U 30 V |
| Certificate | PF 16 CERT 4065 X |
| Nominal voltage | 24 V DC |
| Impulse reset time | < 30 ms |
| Insertion loss | ≤ 0.05 dB, at 0 ... 4 kHz, in 600 Ω-System ≤ 3 dB, at 0 ... 174 kHz, in 100 Ω-System |
| Relative humidity | 5 ... 95 % |
| Degree of protection | IP20 |
| Marking_1 | II (3)D [Ex ic Dc] IIIC |
| Total discharge current (8/20 µs) | I 20 kA (1x) |
| Control drawing | 116-0187 (cCSAus) |
| Connection | screw terminals |
| Labeling | space for labeling at the front |
| Impulse rating | 10 kV/5 kA (category C2) 2 kV/2 kA (category D1) |
| Core cross section | 2 x 2.5 mm |
| Temperature class | T6 for ambient temperature ≤ 50 °C T5 for ambient temperature ≤ 70 °C T4 for ambient temperature ≤ 80 °C |
