商品名称： P+F 倍加福 HiC2831R1 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： HiC2831R1
产品参数
| Mass | approx. 90 g |
| Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Voltage | U 10.5 V |
| Switching frequency | ≤ 5 kHz |
| Current | I 17.1 mA |
| Maximum safe voltage | U 253 V AC (Attention! U is no rated voltage.) |
| Marking_1 | II 3G Ex ec IIC T4 Gc |
| Control drawing_1 | 116-0331 |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I , Ex ec IIC T4 Gc |
| Height | 106 mm |
| EU-type examination certificate | BVS 11 ATEX E 026 |
| Power dissipation | ≤ 500 mW |
| Connection side | control side |
| Certificate | KIWA 15 ATEX 0037 X |
| IECEx certificate | IECEx BVS 11.0040 IECEx KIWA 15.0019X |
| Input | Ex ia |
| Depth | 128 mm |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Protection against electrical shock | IEC 61010-1 |
| Coding | pin 1 and 2 trimmed For further information see system description. |
| Dimensions | 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D) |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018 , EN 50303:2000 |
| Connection | SL1: 6b |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Output/Output | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V |
| Pulse/Pause ratio | min. 100 µs / min. 100 µs |
| Safety Integrity Level (SIL) | SIL 2 |
| Labeling | space for labeling at the front |
| Electromagnetic compatibility | EN IEC 61326-3-2:2018 , NE 21:2017 For further information see system description. |
| UL approval | E106378 |
| Ripple | ≤ 10 % |
| Mounting | on termination board |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Output I, II | signal or fault message, passive transistor output (resistive) 0-signal: 33 kΩ ± 5 % + voltage drop 6.5 V ± 0.5 V 1-signal: voltage drop 6.5 V ± 0.5 V fault: > 100 kΩ |
| Width | 12.5 mm |
| Maximum safe voltage_1 | U 253 V AC (Attention! U is no rated voltage.) |
| Power | P 45 mW (linear characteristic) |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Configuration | via DIP switches |
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Line fault detection | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA |
| Control elements | DIP switch |
| Response time | ≤ 200 µs |
| Power consumption | ≤ 600 mW |
| Rated voltage | U 19 ... 30 V DC with external resistance > 2 kΩ, e. g. 16-channel ProSafe DI card SDV144 from Yokogawa |
| Signal type | Digital Input |
| Display elements | LEDs |
| Systematic capability (SC) | SC 3 |
| Output type | open collector transistor (internal fault bus) |
| Rated current | I ≤ 25 mA |
| Degree of protection | IP20 |
| Rated values | acc. to EN 60947-5-6 (NAMUR), see manual for electrical data |
| Control drawing | 116-0430 (cFMus) |
| Output/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V |
