商品名称： P+F 倍加福 KFA5-DWB-Ex1.D SIL-Capable Products for Hazardous Areas Safety Integrity Level 2
品牌名称： P+F 倍加福
分类名称： 安全传感器
商品订货号：
商品型号： KFA5-DWB-Ex1.D
产品参数
| Mass | 300 g |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2 |
| Pulse duration | > 50 µs |
| Line fault detection | breakage I ≤ 0.15 mA; short-circuit I > 6.5 mA |
| Accuracy | 0.1 % of the measurement value , > 0.001 Hz |
| Influence of ambient temperature | 0.003 %/K (30 ppm) |
| Control elements | Control panel |
| Rated voltage | U 115 V AC +/- 10 % |
| Marking_1 | II 3G Ex nA nC IIC T4 Gc |
| Power dissipation/power consumption | ≤ 2 VA / 2 VA |
| Input II | terminals 13+, 14- non-intrinsically safe |
| Contact loading_1 | 50 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load |
| Measuring range | 0.001 ... 5000 Hz |
| Input I/other circuits | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Height | 119 mm |
| Connection | screw terminals |
| Resolution | 0.1 % of the measurement value , ≥ 0.001 Hz |
| Depth | 115 mm |
| Rated current | I 30 mA |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Contact loading | 253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load |
| Mechanical life | 5 x 10 switching cycles |
| Electromagnetic compatibility | NE 21:2006 |
| Start-up override/power supply | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Safety Integrity Level (SIL) | SIL 2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Maximum safe voltage | U 253 V AC (Attention! U is no rated voltage.) |
| IECEx certificate | IECEx TUN 03.0000 |
| Measuring time | < 100 ms |
| Width | 40 mm |
| Maximum safe voltage_1 | U 253 V (Attention! The rated voltage can be lower.) |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Display elements | LEDs , display |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Certificate | TÜV 02 ATEX 1885 X |
| Input I | terminals 1+, 3-: Ex ia |
| Output I, II | terminals 10, 11, 12; 16, 17, 18 non-intrinsically safe |
| Connection side | control side |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I |
| Output I, II/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Current I | 13.5 mA |
| Power P | 34 mW (linear characteristic) |
| EU-type examination certificate | TÜV 99 ATEX 1408 |
| Marking | II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 |
| Energized/De-energized delay | approx. 20 ms / approx. 20 ms |
| Directive 2014/35/EU | EN 61010-1:2010 |
| Input frequency | 0.001 ... 5000 Hz |
| Active/Passive | I > 4 mA (for min. 100 ms)/ I < 1 mA |
| Voltage U | 10.1 V |
| UL approval | E223772 |
| Signal type | Digital Input |
| Open circuit voltage/short-circuit current | 18 V / 5 mA |
| Configuration | via operating buttons |
| Output I, II against eachother | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V |
| Degree of protection | IP20 |
| Control drawing | 16-538FM-12 |
| Labeling | space for labeling at the front |
| Response delay | ≤ 200 ms |
| Maximum safe voltage U | 40 V (Attention! The rated voltage can be lower.) |
