P+F 倍加福品牌产品信息介绍-买道传感网官网

商品名称： P+F 倍加福 KFD0-RSH-1.1D.F1 信号调节器 K-System (DIN rail, highly functional)

商品型号： KFD0-RSH-1.1D.F1

品牌名： P+F 倍加福

分类：传感器

订货号：

类型：传感器

Rated voltage	U 19 ... 30 V DC loop powered
Minimum switch current	10 mA / 24 V DC
Test input	see functional safety manual
Electromagnetic compatibility	NE 21:2012 , EN 61326-3-1:2008 , EN 61326-3-2:2008
Energized/De-energized delay	150 ms / 150 ms
Signal type	Digital Output
Display elements	LEDs
Mechanical life	5 x 10 switching cycles
Switching frequency	< 3 Hz
Systematic capability (SC)	SC 3
Degree of protection	IP20
Performance level (PL)	PL e
Safety Integrity Level (SIL)	SIL 3
Mass	approx. 120 g
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Rated current	I 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card)
Labeling	space for labeling at the front
Test pulse length	max. 4 ms from DO card
Connection side	field side
Directive 2006/42/EC	EN IEC 62061:2021 , EN/ISO 13849-1:2015
Input/Output	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating.
Directive 2014/35/EU	EN 61010-1:2010
Connection	screw terminals
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Dimensions	20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Contact loading	253 V AC/5 A/cos φ 0.7; 30 V DC/5 A resistive load 253 V AC / 1/2 HP
Signal level	0-signal: -5 ... 5 V 1-signal: 19 ... 26.5 V
Pulse/Pause ratio	150 ms / 150 ms
Fuse rating	2.5 A (scope of delivery) max. 5 AT, recommended maximum utilization of the fuse: 80 %
Power dissipation	< 1.5 W
Power consumption	< 1.5 W
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

商品名称： P+F 倍加福 KFD0-RO-Ex2 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号： KFD0-RO-Ex2

品牌名： P+F 倍加福

分类：模块

订货号：

类型：信号转换模块

Mass	approx. 100 g
Control drawing	116-0261
Mechanical life	5 x 10 switching cycles
Directive 2014/35/EU	EN 61010-1:2010
Rated voltage	U 15 ... 30 V DC , loop powered
Input voltage	15 ... 30 V DC
Contact loading	50 V AC/2 A ; 40 V DC/2 A (TÜV 00 ATEX 1621 X)
IECEx certificate	IECEx BVS 10.0025
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Voltage	U 60 V
Output/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 60 V
Current	I 2 A
Dimensions	20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
EU-type examination certificate	DMT 00 ATEX E 016
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Safety note	Attention! Combination of output Ex i with output Ex i is permitted. If load voltage > 50 V, de-energize before removing the terminals.
Control drawing_1	116-0156
Switching frequency	< 10 Hz
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Degree of protection	IP20
Power dissipation	0.8 W
Input current	≤ 21 mA per channel
Display elements	LEDs
Marking_1	II 3G Ex nA nC IIC T4
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Connection side	field side
Connection	screw terminals
Energized/De-energized delay	approx. 10 ms / approx. 5 ms
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Safety Integrity Level (SIL)	SIL 3
Ambient temperature	-20 ... 65 °C (-4 ... 149 °F)
Output	Ex ia
Certificate	TÜV 00 ATEX 1621 X
Signal type	Digital Output
Labeling	space for labeling at the front
Electromagnetic compatibility	NE 21:2006
Maximum safe voltage	U 40 V DC (Attention! U is no rated voltage.)

商品名称： P+F 倍加福 KFD2-GUT-Ex1.D SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： KFD2-GUT-Ex1.D

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Signal type	Analog input
Contact loading	50 V AC/2 A/cos φ > 0.7; 40 V DC/1 A resistive load
Mechanical life	5 x 10 switching cycles
Labeling	space for labeling at the front
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Current	I 8 mA
Power dissipation/power consumption	≤ 2 W / 2.2 W
Programming interface	programming socket
Output III	Analog current output
Control elements	Control panel
Input	Ex ia
Power	P 67 mW
Types of measuring	2-, 3-, 4-wire technology
Cold junction compensation	external and internal
Types of measuring_1	2-, 3-, 5-wire technology
Rated voltage	U 20 ... 30 V DC
Rated current	I approx. 100 mA
Display elements	LEDs , display
Electromagnetic compatibility	NE 21:2007
Marking_1	II 3G Ex nA nC IIC T4 Gc
Collective error message	Power Rail
RTD	max. 0.2 % of span
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Voltage	U 13.1 V
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Certificate	PF 08 CERT 1213 X
Output III/power supply and collective error	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Height	119 mm
Current I	21 mA
Thermocouples	max. 10µV deviation of CJC: ±0.8 K
Inputs	terminals 1, 2, 3, 4, 6 (for passive equipment)
Current output	max. 20 µA
Energized/De-energized delay	approx. 20 ms / approx. 20 ms
Directive 2014/35/EU	EN 61010-1:2010
Width	40 mm
Input_1	terminals 2, 6 (for active equipment)
Connection	screw terminals
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Output I, II	relay
Load	max. 650 Ω
Lead resistance	max. 50 Ω
Measurement loop monitoring	sensor breakage, sensor short-circuit
Power_1	P 200 mW
Output I, II against eachother	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Degree of protection	IP20
Mass	300 g
IECEx certificate	IECEx TUN 09.0019
Configuration	via operating buttons via PACTware
Depth	115 mm
Measurement loop monitoring_1	sensor breakage
Input/Other circuits	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Temperature effect	Input: 0.005 %/K (50 ppm) of span ; current output: 0.005 %/K (50 ppm) of span
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
EU-type examination certificate	TÜV 03 ATEX 2140
Connection side	control side
Measuring current	approx. 400 µA with resistance measuring sensor
Input resistance	≥ 250 kΩ (0 ... 10 V) min. 1 MΩ (0 ... 1 V, -100 ... 100 mV)
Voltage_1	U 29 V
Dimensions	40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Current range	0 ... 20 mA or 4 ... 20 mA
Fault signal	downscale I ≤ 3.6 mA, upscale I ≥ 21 mA (acc. NAMUR NE43)
Voltage U	13.1 V
Power P	67 mW
Maximum safe voltage_2	U 40 V (Attention! The rated voltage can be lower.) , RS 232
Interface/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Current_1	I 11 mA
Safety Integrity Level (SIL)	SIL 2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Open loop voltage	max. 24 V DC
Output I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Maximum safe voltage_1	U 40 V (Attention! The rated voltage can be lower.)
Sampling rate	approx. 700 ms
Maximum safe voltage	U 40 V DC (Attention! The rated voltage can be lower.)
Potentiometer	0.1 % of span when < 5 kΩ 0.5 % of span when > 5 kΩ

商品名称： P+F 倍加福 KFD2-VR2-Ex1.50M 本质安全型隔离栅 K-System (DIN rail mounting)

商品型号： KFD2-VR2-EX1.50M

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：安全栅

Voltage	U 5.5 V DC
Power	P 3.3 mW
Connection	screw terminals
Display elements	LED
Ambient temperature	-40 ... 60 °C (-40 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
After calibration	at 20 °C (68 °F): ± 3 µV up to ± 10 mV/± 0.03 % of the span up to +50 mV/± 0.05 % of the span up to -50 mV
Ripple	within the supply tolerance
Influence of ambient temperature	± 1 µV/K (typical ± 0.25 µV/K)
Output resistance	max. 3 Ω
Degree of protection	IP20
Control drawing	116-0334 (cULus)
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Width	20 mm
Depth	115 mm
Marking_1	II 3G Ex ec IIC T4 Gc
Rated current	I ≤ 11 mA
Power dissipation/power consumption	0.3 W max.
Rated voltage	U 19 ... 30 V DC
Electromagnetic compatibility	NE 21:2006
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
Connection side	control side
Height	119 mm
Fault signal	sensor breakage: > +100 mV (upscale), < -100 mV (downscale)
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN IEC 60079-7:2015+A1:2018 , EN 60079-11:2012
Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Protection against electrical shock	UL 61010-1
Labeling	space for labeling at the front
Dimensions	20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Certificate	BASEEFA 09 ATEX 0219X
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Signal type	Analog input
EU-type examination certificate	BASEEFA 06 ATEX 0040
Output/power supply	functional insulation, rated insulation voltage 50 V AC
Absolute	< 0.25 K at 30 V voltage supply
UL approval	E106378
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Line fault detection	100 nA
Mass	approx. 125 g
IECEx certificate	IECEx BAS 06.0011 IECEx BAS 09.0103X
Control elements	DIP switch
Configuration	via DIP switches
Rise time	≤ 1 ms
Current	I 2.4 mA
Maximum safe voltage	U 250 V (Attention! The rated voltage can be lower.)
Offset voltage/current	≤ 5 µV / ≤ 5 nA
Cut-off frequency	350 Hz (-3 dB)
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Load	Accuracy figures for infinite load impedance. Additional 0.03 % of span for a load resistance of 10 kΩ
Input resistance	min. 20 MΩ
Transmission range	-50 ... 50 mV

商品名称： P+F 倍加福 KFU8-GUT-1.D 信号调节器 K-System (DIN rail, highly functional)

商品型号： KFU8-GUT-1.D

品牌名： P+F 倍加福

分类：模块

订货号：

类型：信号转换模块

Safety Integrity Level (SIL)	SIL 2
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Mass	300 g
Height	119 mm
Input/Other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Degree of protection	IP20
Dimensions	40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Measuring current	approx. 400 µA
Measurement loop monitoring	sensor breakage, sensor short-circuit
Measurement loop monitoring_1	sensor breakage
Output I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Output I, II against eachother	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Labeling	space for labeling at the front
Fault signal	downscale I ≤ 3.6 mA, upscale I ≥ 21 mA (acc. NAMUR NE43)
Power dissipation/power consumption	≤ 2 W ; 2.5 VA / 2.2 W ; 3 VA
Sampling rate	approx. 700 ms
Input resistance	≥ 250 kΩ (0 ... 10 V) min. 1 MΩ (0 ... 1 V, -100 ... 100 mV)
Mechanical life	5 x 10 switching cycles
Directive 2014/35/EU	EN 61010-1:2010
Lead resistance	max. 50 Ω
Cold junction compensation	external and internal
Interface/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Temperature effect	Input: 0.005 %/K (50 ppm) of span ; current output: 0.005 %/K (50 ppm) of span
Current range	0 ... 20 mA or 4 ... 20 mA
Connection side	control side
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
RTD	max. 0.2 % of span
Potentiometer	0.1 % of span when < 5 kΩ 0.5 % of span when > 5 kΩ
Output I, II	relay
Open loop voltage	max. 24 V DC
Load	max. 650 Ω
Display elements	LEDs , display
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Voltage	0.1 % of span
Configuration	via operating buttons via PACTware
Energized/De-energized delay	approx. 20 ms / approx. 20 ms
Electromagnetic compatibility	NE 21:2007
Depth	115 mm
Types of measuring	2-, 3-, 4-wire technology
Types of measuring_1	2-, 3-, 5-wire technology
Thermocouples	max. 10µV deviation of CJC: ±0.8 K
Contact loading	250 V AC / 2 A / cos φ ≥ 0.7 ; 40 DC / 2 A
Current output	max. 20 µA
Output III/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Signal type	Analog input
Connection	screw terminals
Rated voltage	U 20 ... 90 V DC / 48 ... 253 V AC
Width	40 mm
Programming interface	programming socket
Output III	Analog current output

商品名称： P+F 倍加福 NBB5-18GM60-WS 电感式传感器

商品型号： NBB5-18GM60-WS

品牌名： P+F 倍加福

分类：开关传感器

订货号：

类型：电感式接近开关

外壳材料	黄铜，镀镍
螺纹尺寸	L 2 m
连接方式	电缆
输出电路	双线式
开关类型	常开 (NO)
感应面	PBT
工作温度	-25 ~ 70
防护等级	IP67
感应距离	5
长度	L 2 m
工作电压	20 ~ 253
直径	18 mm
开关频率	0 ~ 20
安装在金属	齐平

商品名称： OBT1250-R202-E5

商品型号： OBT1250-R202-E5

品牌名： P+F 倍加福

分类：传感器

订货号：

类型：传感器

商品名称： NJ10-30GM-N-V1-电感式接近开关-P+F 倍加福接近开关,非接触外形:M30 检测类型:屏蔽检测距离:10 输出电路:Namur 输出功能:NC

商品型号： NJ10-30GM-N-V1

品牌名： P+F 倍加福

分类：开关传感器

订货号：

类型：电感式接近开关

工作电压	8
检测距离(电感/电容)	10
开关频率	300
外壳材料	不锈钢
输出电路	Namur
防护等级	IP65
连接方式	接插件
输出功能	NC
外形	M30
工作温度	-25~100
检测类型(电感/电容)	屏蔽
长度(圆柱形)	50

商品名称： DVS58N-011AGR0BN-0013 P+F 倍加福运动控制传感器

商品型号： DVS58N-011AGR0BN-0013

品牌名： P+F 倍加福

分类：运动控制传感器

订货号：

类型：绝对值编码器

商品名称： P+F 倍加福 NBN4-12GM50-A2-V1 电感式传感器

商品型号： NBN4-12GM50-A2-V1

品牌名： P+F 倍加福

分类：开关传感器

订货号： 326161-0072

类型：电感式接近开关

外壳材料	黄铜，白青铜带涂层
重量	28 g
工作温度	-40 ~ 85
直径	12 mm
安装在金属	有螺母，M12
防护等级	IP65 / IP66 / IP67 / IP68
螺纹尺寸	64,5 mm
开关频率	0 ~ 2650
输出电路	PNP
感应面	PBT ，绿色
感应距离	4
连接方式	连接器插头 M12x4针
开关类型	互补
长度	64,5 mm
工作电压	6 ~ 36