P+F 倍加福品牌产品信息介绍-买道传感网官网

商品名称： P+F 倍加福 HiD2038 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： HID2038

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Mounting	on termination board
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
IECEx certificate	IECEx ULD 20.0012X
Line fault detection	breakage, load > 100 kΩ, short-circuit, load < 50 Ω
Width	18 mm
Power consumption	≤ 1 W
Rated voltage	U 19 ... 30 V DC bus powered via Termination Board
Dimensions	18 x 114 x 130 mm (0.7 x 4.5 x 5.1 inch) (W x H x D)
Connection side	field side
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Electromagnetic compatibility	NE 21:2017 EN 61326-3-2:2018 For further information see system description.
Output	Ex ia, Ex iaD
Current	I 93 mA
Depth	130 mm
Maximum safe voltage_1	U 250 V (Attention! The rated voltage can be lower.)
Input/input	functional insulation, rated insulation voltage 50 V AC
Degree of protection	IP20
Mass	approx. 140 g
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Power dissipation	≤ 1 W at 20 mA and 500 Ω load
Output type	open collector transistor (internal fault bus)
Coding	pin 1 and 3 trimmed For further information see system description.
EU-type examination certificate	DEMKO 20 ATEX 2378 X
Certificate	DEMKO 20 ATEX 2379 X
Marking_1	II 3G Ex ec IIC T4 Gc
Internal capacitance	C 1.05 nF
Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018
Input voltage	open loop voltage of the control system ≤ 30 V
Labeling	space for labeling at the front
Maximum safe voltage	U 250 V (Attention! The rated voltage can be lower.)
Influence of ambient temperature	< 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F))
Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Protection against electrical shock	UL 61010-1:2012
Deviation	at 20 °C (68 °F), 4 ... 20 mA < 0.1 % of full scale, incl. non-linearity and hysteresis
Frequency range	field side into the control side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB)
Ambient temperature	-40 ... 70 °C (-40 ... 158 °F)
Voltage	U 25.2 V
Connection	SL1: 6b
IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex ec IIC T4 Gc
Load	100 ... 650 Ω , for terminals 1a, 1b; 5a, 5b 0 ... 550 Ω , for terminals 1b, 3b; 5b, 7a
UL approval	E106378
Voltage drop	approx. 6 V at 20 mA
Input signal	4 ... 20 mA , limited to approx. 30 mA
Rated current	I ≤ 40 mA at 24 V
Rise time	10 to 90 % ≤ 10 ms
Power	P 585.3 mW
Input/power supply	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Internal inductance	L 0
Safety Integrity Level (SIL)	SIL 2
Control drawing	116-0475 (cULus)
Signal type	Analog output
Display elements	LEDs
Height	114 mm
Ripple	20 mV rms
Input resistance	field wiring open circuit : > 100 kΩ field wiring < 50 Ω : > 100 kΩ when using terminals 5a, 5b; 1a, 1b

商品名称： P+F 倍加福 S1SD-1DI-1R 信号调节器 SC-System (DIN rail, compact design)

商品型号： S1SD-1DI-1R

品牌名： P+F 倍加福

分类：其他过程测量仪表

订货号：

类型：开关放大器

Signal type	Digital Input
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Protection against electrical shock	EN 61010-1:2010
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Type_1	2-wire
Connection_1	terminals 5+, 6
Sensor supply_2	8 V
Input impedance_2	1 kΩ
Type_3	2-wire
Type_5	3-wire
Damaging gas	designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Configuration	via DIP switches
Signal	acc. to EN 60947-5-6 (NAMUR)
Sensor supply	8 V
Energized/De-energized delay	≤ 20 ms / ≤ 20 ms
Labeling	space for labeling at the front
Degree of protection	IP20
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Open-circuit	< 0.1 mA
Connection_3	terminals 5+, 6
Switching point_3	2 ... 5 mA
External supply_2	≤ 32 V
Type_6	3-wire
Connection_6	terminals 5+, 6, 7-
Signal_6	115 V AC/DC
Contact loading	253 V AC/2 A/cos φ > 0.7; 126.5 V AC/2 A/cos φ > 0.7; 30 V DC/2 A resistive load
Mechanical life	10 switching cycles
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Type_2	2-wire
External supply_1	≤ 32 V
Sensor supply_4	15 V
Signal_3	acc. to EN 60947-5-2
Power dissipation	0.6 W
Connection_2	terminals 5+, 6
Switching point_5	3 ... 5 V
Signal_4	acc. to EN 60947-5-2
Switching point_9	80 ... 115 V
Output	signal, relay
Connection side	control side
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Dimensions	6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1
Open-circuit_1	< 0.1 mA
Short-circuit_1	> 6 mA
Signal_2	acc. to EN 62053-31 , Type B
Power consumption	1.1 W
Height	97 mm
Width	6.2 mm
Core cross section	0.5 ... 2.5 mm (20 ... 14 AWG)
Switching point_1	8 ... 10 V / 1.2 ... 2.1 mA
Switching point_2	1.2 ... 2.1 mA
External supply_3	≤ 32 V
Connection_7	terminals 7, 8
Signal_5	24 V AC/DC
Signal_7	230 V AC/DC
Input/Other circuits	safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V test voltage 3 kV, 50 Hz, 1 min
Sensor supply_3	16 V / 25 mA , short-circuit protected
Type_4	2-wire
Switching point_4	0.15 ... 2 mA
Connection_5	terminals 5+, 6, 7-
Input impedance_5	4 kΩ
Sensor supply_6	16 V / 25 mA , short-circuit protected
Switching point_6	8 ... 10 V
Switching point_7	10 ... 15 V
Input impedance_9	> 680 kΩ
Connection	screw terminals
Rated voltage	U 16.8 ... 31.2 V DC
Output/power supply	safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V test voltage 3 kV, 50 Hz, 1 min
Type	2-wire
Switching point	1.2 ... 2.1 mA
External supply	≤ 32 V
Input impedance_1	4 kΩ
Input impedance_3	1 kΩ
Input impedance_6	4 kΩ
Connection_8	terminals 7, 8
Input impedance_8	> 680 kΩ
Connection_9	terminals 7, 8
Directive 2014/35/EU	EN 61010-1:2010
Mass	approx. 60 g
Depth	107 mm
Short-circuit	> 6 mA
Input impedance	1 kΩ
Sensor supply_1	15 V
Signal_1	acc. to EN 60947-5-2
Connection_4	terminals 5+, 6
Input impedance_4	4 kΩ
Sensor supply_5	16 V / 25 mA , short-circuit protected
Switching point_8	40 ... 60 V
Switching frequency	≤ 10 Hz
Input impedance_7	> 680 kΩ
Minimum switch current	2 mA / 24 V DC

商品名称： P+F 倍加福 HiD2872 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号： HiD2872

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Display elements	LEDs
Signal level	1-signal: 15...30 V DC (current limited to 3 mA) or contact close (internal 10 kΩ pull-up) 0-signal: 0...5 V DC or contact open
Open loop voltage	U approx. 22.5 V
EU-type examination certificate	CESI 10 ATEX 036
Energized/De-energized delay	- bus powered: filter OFF: 1 ms, filter ON: 10 ms - loop powered: switch-on 50 ms, switch-off 6 ms (300 Ω load)
Internal resistor	R approx. 240 Ω
Fault current	4 mA pulsing (20 ms ON, 200 ms OFF)
Mass	approx. 140 g
Dimensions	18 x 114 x 130 mm (0.7 x 4.5 x 5.1 inch) (W x H x D)
Voltage	U 26 V
Output	Ex ia Ga, Ex ia Da, Ex ia Ma
IECEx certificate	IECEx CES 10.0013
Depth	130 mm
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mounting	on termination board
Switching frequency	f - bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz - loop powered: max. 10 Hz
Certificate	PF 10 CERT 1729 X
Current limit	I 55 mA
Rated voltage	U 20.4 ... 30 V DC loop powered 20.4 ... 30 V DC bus powered via Termination Board
Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
Input current	62 mA at 24 V, 300 Ω load (per channel)
Current	I 110 mA
Output type	open collector transistor (internal fault bus)
Coding	pin 1 and 4 trimmed For further information see system description.
Safety Integrity Level (SIL)	SIL 3
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Control drawing	366-005CS-12B (cCSAus)
Labeling	space for labeling at the front
Height	114 mm
Connection side	field side
Connection	SL1: 6b
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Marking_1	II 3G Ex nA IIC T4 Gc
IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Power	P 715 mW
Output/Output	safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V
Electromagnetic compatibility	NE 21:2006 For further information see system description.
Configuration	via DIP switches
Width	18 mm
Control input	external switch (dry contact or open collector) non isolated or logic signal input fully floating
Relative humidity	5 ... 90 %, non-condensing up to 35 °C (95 °F)
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Signal type	Digital Output
Power dissipation	1 W at 24 V, 300 Ω load (per channel) for loop powered
Maximum safe voltage	U 253 V AC (Attention! U is no rated voltage.)
Control elements	DIP switch
Inrush current	0.2 A , 15 ms loop powered
Fault level	lead short-circuit detection at < 25 Ω lead breakage detection at > 100 kΩ typical
Output/power supply, inputs, and collective error	safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V
Degree of protection	IP20
Load	nominal 0.1 ... 5 kΩ