商品名称: P+F 倍加福 HD2-GTR-4PA Segment Coupler for PROFIBUS PA
商品型号: HD2-GTR-4PA
品牌名: P+F 倍加福
分类: 其他
订货号:
类型: 网关
|
| Rated voltage |
U 19.2 ... 35 V DC |
| Installation in hazardous area |
Zone 2 / Div. 2 |
| Power dissipation |
3 W |
| Rated current |
I 160 ... 90 mA |
| Design / Mounting |
Motherboard based |
| All circuits/FE |
functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Galvanic isolation |
IEC 62103 |
| Mass |
250 g |
| Marking |
II 3 G Ex nA IIC T4 Gc |
| Vibration resistance |
1 g , 10 ... 150 Hz |
| Supplementary information |
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| LED PWR |
green: Power on |
| Number of segments |
4 |
| Ambient temperature |
-40 ... 60 °C (-40 ... 140 °F) |
| Relative humidity |
< 95 % non-condensing |
| Corrosion resistance |
acc. to ISA-S71.04-1985, severity level G3 |
| Housing material |
Polycarbonate |
| IECEx certificate |
IECEx TUN 13.0038X |
| PROFIBUS DP/Supply |
functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Width |
40 mm |
| FM marking |
Class I, Division 2, Groups A, B, C, D, T4 / Class I, Zone 2, AEx/Ex ec IIC T4 |
| LED Red. |
yellow: redundant operation primary device ; yellow 2 Hz flashing: synchronization or redundancy not available |
| Directive 2014/30/EU |
EN 61326-1:2013 |
| Directive 73/23/EEC |
EN 50178 (identical to EN 62103) |
| Shock resistance |
15 g 11 ms |
| Storage temperature |
-40 ... 85 °C (-40 ... 185 °F) |
| Height |
106 mm |
| FM certificate |
FM 19 US 0015 X and FM 19 CA 0011 X |
| CH/PROFIBUS DP |
functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Mounting |
motherboard mounting |
| Directive 2014/34/EU |
EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 |
| IECEx marking |
Ex nA IIC T4 Gc |
| LED DP/ERR |
red 2 Hz flashing: DP error ; red: Hardware error |
| CH/CH |
functional insulation acc. to IEC 62103, rated insulation voltage 50 V |
| Connection |
9-pin Sub-D socket |
| Protocol |
PROFIBUS DP V1 |
| LED Seg 1...4 |
red 2 Hz flashing: PA error, red and LED DP/ERR red: MAU error |
| Electromagnetic compatibility |
NE 21:2011 |
| Degree of protection |
IP20 |
| Fieldbus standard |
IEC 61158-2 |
| Pollution degree |
max. 2, according to IEC 60664 |
| Depth |
128 mm |
| Certificate |
TÜV 04 ATEX 2500 X |
|
商品名称: P+F 倍加福 ICZ-MH30-25-T10 RFID and Optical Identification RFID Accessories
商品型号: ICZ-MH30-25-T10
品牌名: P+F 倍加福
分类: 其它(传感器)
订货号:
类型: RFID附件
|
| 直径 |
30 mm |
| 材料 |
PTFE |
| 存储温度 |
-40 ... 250 °C (-40 ... 482 °F) |
| 高度 |
25 mm |
|
商品名称: P+F 倍加福 V1S-G-1M-PUR Connection Technology
商品型号: V1S-G-1M-PUR
品牌名: P+F 倍加福
分类: 传感器附件
订货号:
类型: 电缆及适配器
|
| 拧紧扭矩 |
0,6 Nm |
| 工具安装 |
直纹滚花六角螺母 SW = 14 mm |
| 弯曲半径 |
> 10 x 电缆直径,活动式 > 8 倍缆线直径,固定式 |
| 长度 |
L 1 m |
| 运动速度 |
max. 0,3 m/s |
| 耐水解 |
是 |
| 连接 |
公头连接器 |
| 防护等级 |
IP68/IP69 |
| 固定缆线 |
-40 ... 80 °C (-40 ... 176 °F) |
| 柔性电缆 |
-25 ... 80 °C (-13 ... 176 °F) |
| 防松弛 |
可用 |
| 芯颜色 |
1 号芯: 棕色 2 号芯: 白色 3 号芯: 蓝色 4 号芯: 黑色 |
| 针脚数 |
4 |
| 插头连接 |
M12 x 1 连接器 : IEC 61076-2-101 |
| 电缆 |
符合 IEC/EN 60228 (DIN VDE 0295) 5 级 |
| 护套 |
PUR 聚醚基底 |
| 质量 |
39 g |
| 样式 |
直型 |
| 连接_1 |
电缆尾部 |
| 易燃性 |
V-2 |
| 额定电阻 |
良好 |
| 耐微生物 |
是 |
| 无卤 |
是 |
| 线芯横截面积 |
0,34 mm |
| 内芯构造 |
19 x 0,15 mm ∅ |
| 牵引链循环 |
max. 50 / 日 |
| 磁芯绝缘 |
PP |
| 结构类型 |
M12 |
| 插塞式连接器 |
-40 ... 90 °C (-40 ... 194 °F) |
| 配接次数 |
min. 100 |
| 护套颜色 |
灰色(类似于 RAL 7001) |
| 主体 |
TPU,黑色 |
| 接触表面 |
镀金 (Au) |
| 编码 |
A 码 |
| 工作电流 |
I 最大 4 A |
| 污染程度 |
3 |
| 锁定 |
螺钉连接 |
| 护套直径 |
4,8 mm |
| 护套剥离力 |
max. 60 N / 500 mm |
| 电缆代码 |
Li 9Y 11YM 4 x 0.34 |
| 工作电压 |
U 最大 250 V AC/DC |
| 芯数 |
4 |
| 滚花螺钉连接 |
锌压铸件,镀镍 |
|
商品名称: P+F 倍加福 V1-W-N-10M-PUR Connection Technology
商品型号: V1-W-N-10M-PUR
品牌名: P+F 倍加福
分类: 传感器附件
订货号:
类型: 电缆及适配器
|
| 结构类型 |
M12 |
| 锁定 |
螺钉连接 |
| 连接 |
插座 |
| 柔性电缆 |
-20 ... 80 °C (-4 ... 176 °F) |
| 护套直径 |
4,8 mm |
| 内芯构造 |
42 x 0,1 mm ∅ |
| 滚花螺钉连接 |
锌压铸件,镀镍 |
| 易燃性_1 |
HB |
| 单位长度电感 |
R' max. 0,057 Ω/m |
| 单位长度电容 |
C' 102,4 nF/km |
| 编码 |
A 码 |
| 连接_1 |
电缆尾部 |
| 配接次数 |
min. 100 |
| 接触表面 |
镀金 (Au) |
| 护套 |
PUR 聚醚基底 |
| 磁芯绝缘 |
PVC |
| 电缆 |
符合 IEC/EN 60228 (DIN VDE 0295) 6 级 |
| 芯数 |
2 |
| 芯颜色 |
1 号芯: 棕色 2 号芯: 蓝色 |
| 长度 |
L 10 m |
| 针脚数 |
2 |
| 工作电流 |
I 4 A |
| 易燃性 |
V-2 |
| 样式 |
直角 |
| 污染程度 |
3 |
| 护套颜色 |
蓝色(类似于 RAL 5015) |
| 电缆代码 |
Li FY 11Y 2 x 0.34 |
| 工具安装 |
直纹滚花六角螺母 SW = 14 mm |
| 弯曲半径 |
> 15 倍缆线直径,活动 > 10 x 电缆直径,固定式 |
| 线芯横截面积 |
0,34 mm |
| 密封件 |
FKM |
| 质量 |
262,17 g |
| 工作电压 |
U 最大 250 V AC/DC |
| 防护等级 |
IP68/IP69 |
| 插塞式连接器 |
-40 ... 90 °C (-40 ... 194 °F) |
| 主体 |
TPU,黑色 |
| 固定缆线 |
-40 ... 80 °C (-40 ... 176 °F) |
| 拧紧扭矩 |
0,6 Nm |
| 防松弛 |
可用 |
| 插头连接 |
M12 x 1 连接器 : IEC 61076-2-101 |
| 单位长度电感_1 |
L' 0,49 mH/km |
|
商品名称: P+F 倍加福 V15S-G-PG9 Connection Technology
商品型号: V15S-G-PG9
品牌名: P+F 倍加福
分类: 传感器附件
订货号:
类型: 电缆及适配器
|
| 针脚数 |
5 |
| 工作电流 |
I 最大 4 A |
| 接触表面 |
铜锡锌 |
| 连接 |
螺丝接线端子,用于最大 0.75 mm / AWG 18 |
| 结构类型 |
M12 |
| 锁定 |
螺钉连接 |
| 工具安装 |
直纹滚花 , 六角螺母 SW = 18 mm |
| 质量 |
22,94 g |
| 拧紧扭矩 |
0,6 Nm |
| 主体 |
PA,黑色 |
| 样式 |
直型 |
| 配接次数 |
min. 50 |
| 绝缘电阻 |
min. 100 MΩ |
| 环境温度 |
-40 ... 85 °C (-40 ... 185 °F) |
| 插头连接 |
M12 x 1 连接器 : IEC 61076-2-101 |
| 线芯横截面积 |
0,75 mm / 18 AWG 最大 |
| 滚花螺钉连接 |
铜锌合金,镀镍 |
| UL 文件编号 |
E363587 |
| 防护等级 |
IP67 |
| 编码 |
A 码 |
| 工作电压 |
U 最大 48 V AC / 60 V DC |
| 污染程度 |
3 |
| 护套直径 |
6 ...8 mm |
|
商品名称: EVM58N-032IZR0BN-1213 P+F 倍加福 运动控制传感器
商品型号: EVM58N-032IZR0BN-1213
品牌名: P+F 倍加福
分类: 运动控制传感器
订货号:
类型: 绝对值编码器
|
|
商品名称: P+F 倍加福 NEN6-8GM40-E2-V3 电感式传感器
商品型号: NEN6-8GM40-E2-V3
品牌名: P+F 倍加福
分类: 开关传感器
订货号:
类型: 电感式接近开关
|
| 开关频率 |
0 ~ 1500 |
| 连接方式 |
连接器插头 M8 x3 针 |
| 防护等级 |
IP65 / IP66 / IP67 |
| 长度 |
55 mm |
| 螺纹尺寸 |
55 mm |
| 工作温度 |
-25 ~ 85 |
| 安装在金属 |
非齐平 |
| 输出电路 |
PNP |
| 开关类型 |
常开 (NO) |
| 感应距离 |
6 |
| 感应面 |
LCP |
| 直径 |
8 mm |
| 工作电压 |
5 ~ 30 |
| 外壳材料 |
黄铜,镀镍 |
|
商品名称: ENI58IL-S10CA5-4096UD1-RAA P+F 倍加福 运动控制传感器
商品型号: ENI58IL-S10CA5-4096UD1-RAA
品牌名: P+F 倍加福
分类: 运动控制传感器
订货号:
类型: 增量式编码器
|
|
商品名称: P+F 倍加福 WCS2-MH1 Optical Linear Positioning Systems Optical Linear Positioning Systems
商品型号: WCS2-MH1
品牌名: P+F 倍加福
分类: 运动控制传感器
订货号:
类型: 安装配件
|
| 材料 |
聚酰胺 (PA6-GF30) |
| 环境温度 |
-40 ... 130 °C (-40 ... 266 °F) |
| 质量 |
20 g |
|
商品名称: P+F 倍加福 KCD2-SON-Ex2 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2
商品型号: KCD2-SON-Ex2
品牌名: P+F 倍加福
分类: 安全传感器
订货号:
类型: 隔离栅
|
| Dimensions |
12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2 |
| Output/Output |
basic insulation according to EN 50178, rated insulation voltage 50 V |
| Directive 2014/30/EU |
EN 61326-1:2013 (industrial locations) |
| Maximum safe voltage |
U 253 V AC (Attention! U is no rated voltage.) |
| Marking_1 |
II 3G Ex ec IIC T4 Gc |
| Supplementary information |
Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Connection side |
control side |
| Connection |
screw terminals |
| Electromagnetic compatibility |
NE 21:2011 , EN 61326-3-2:2008 |
| Output I, II |
signal or fault message, passive transistor output (resistive) 0-signal: 14 kΩ ± 10 % 1-signal: 1.8 kΩ ± 10 % fault: > 100 kΩ |
| Directive 2014/34/EU |
EN IEC 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 |
| Control drawing |
116-0374 (cULus) |
| Power dissipation |
≤ 750 mW |
| EU-type examination certificate |
BASEEFA 13 ATEX 0080 |
| Signal type |
Digital Input |
| Labeling |
space for labeling at the front |
| Rated values |
acc. to EN 60947-5-6 (NAMUR) |
| Response time |
≤ 200 µs |
| Protection against electrical shock |
IEC 61010-1:2010 |
| Rated voltage |
U typ. 8 V max. 20 V DC |
| Certificate |
CML 19 ATEX 4410 X |
| IECEx marking |
[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc |
| Width |
12.5 mm |
| Depth |
114 mm |
| Power |
P 45 mW (linear characteristic) |
| Current |
I 17.1 mA |
| Open circuit voltage/short-circuit current |
approx. 10 V DC / approx. 8 mA |
| Configuration |
via DIP switches |
| Height |
119 mm |
| Systematic capability (SC) |
SC 3 |
| Rated current |
I 35 ... 25 mA |
| Line fault detection |
breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA |
| Input |
Ex ia |
| Pulse/Pause ratio |
min. 100 µs / min. 100 µs |
| Input/power supply |
safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Marking |
II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I |
| Voltage |
U 10.5 V |
| Switching frequency |
≤ 5 kHz |
| Display elements |
LEDs |
| Ripple |
≤ 10 % |
| Ambient temperature |
-20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions |
| Mass |
approx. 100 g |
| Input/Output |
safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Collective error message |
Power Rail |
| Control elements |
DIP switch |
| Switching point/switching hysteresis |
1.2 ... 2.1 mA / approx. 0.2 mA |
| Safety Integrity Level (SIL) |
SIL 2 |
| Degree of protection |
IP20 |
| Mounting |
on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| IECEx certificate |
IECEx BAS 13.0046 IECEx CML 19.0147X |
| Maximum safe voltage_1 |
U 253 V AC (Attention! The rated voltage can be lower.) |
| Output/power supply |
basic insulation according to EN 50178, rated insulation voltage 50 V |
|