模块-工业控制-模块品牌厂家-买道传感网官网

商品名称： P+F 倍加福 KFD0-RO-Ex2 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号： KFD0-RO-Ex2

品牌名： P+F 倍加福

分类：模块

订货号：

类型：信号转换模块

Mass	approx. 100 g
Control drawing	116-0261
Mechanical life	5 x 10 switching cycles
Directive 2014/35/EU	EN 61010-1:2010
Rated voltage	U 15 ... 30 V DC , loop powered
Input voltage	15 ... 30 V DC
Contact loading	50 V AC/2 A ; 40 V DC/2 A (TÜV 00 ATEX 1621 X)
IECEx certificate	IECEx BVS 10.0025
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Voltage	U 60 V
Output/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 60 V
Current	I 2 A
Dimensions	20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
EU-type examination certificate	DMT 00 ATEX E 016
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Safety note	Attention! Combination of output Ex i with output Ex i is permitted. If load voltage > 50 V, de-energize before removing the terminals.
Control drawing_1	116-0156
Switching frequency	< 10 Hz
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Degree of protection	IP20
Power dissipation	0.8 W
Input current	≤ 21 mA per channel
Display elements	LEDs
Marking_1	II 3G Ex nA nC IIC T4
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Connection side	field side
Connection	screw terminals
Energized/De-energized delay	approx. 10 ms / approx. 5 ms
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Safety Integrity Level (SIL)	SIL 3
Ambient temperature	-20 ... 65 °C (-4 ... 149 °F)
Output	Ex ia
Certificate	TÜV 00 ATEX 1621 X
Signal type	Digital Output
Labeling	space for labeling at the front
Electromagnetic compatibility	NE 21:2006
Maximum safe voltage	U 40 V DC (Attention! U is no rated voltage.)

商品名称： P+F 倍加福 KFU8-GUT-1.D 信号调节器 K-System (DIN rail, highly functional)

商品型号： KFU8-GUT-1.D

品牌名： P+F 倍加福

分类：模块

订货号：

类型：信号转换模块

Safety Integrity Level (SIL)	SIL 2
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Mass	300 g
Height	119 mm
Input/Other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Degree of protection	IP20
Dimensions	40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Measuring current	approx. 400 µA
Measurement loop monitoring	sensor breakage, sensor short-circuit
Measurement loop monitoring_1	sensor breakage
Output I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Output I, II against eachother	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Labeling	space for labeling at the front
Fault signal	downscale I ≤ 3.6 mA, upscale I ≥ 21 mA (acc. NAMUR NE43)
Power dissipation/power consumption	≤ 2 W ; 2.5 VA / 2.2 W ; 3 VA
Sampling rate	approx. 700 ms
Input resistance	≥ 250 kΩ (0 ... 10 V) min. 1 MΩ (0 ... 1 V, -100 ... 100 mV)
Mechanical life	5 x 10 switching cycles
Directive 2014/35/EU	EN 61010-1:2010
Lead resistance	max. 50 Ω
Cold junction compensation	external and internal
Interface/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Temperature effect	Input: 0.005 %/K (50 ppm) of span ; current output: 0.005 %/K (50 ppm) of span
Current range	0 ... 20 mA or 4 ... 20 mA
Connection side	control side
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
RTD	max. 0.2 % of span
Potentiometer	0.1 % of span when < 5 kΩ 0.5 % of span when > 5 kΩ
Output I, II	relay
Open loop voltage	max. 24 V DC
Load	max. 650 Ω
Display elements	LEDs , display
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Voltage	0.1 % of span
Configuration	via operating buttons via PACTware
Energized/De-energized delay	approx. 20 ms / approx. 20 ms
Electromagnetic compatibility	NE 21:2007
Depth	115 mm
Types of measuring	2-, 3-, 4-wire technology
Types of measuring_1	2-, 3-, 5-wire technology
Thermocouples	max. 10µV deviation of CJC: ±0.8 K
Contact loading	250 V AC / 2 A / cos φ ≥ 0.7 ; 40 DC / 2 A
Current output	max. 20 µA
Output III/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Signal type	Analog input
Connection	screw terminals
Rated voltage	U 20 ... 90 V DC / 48 ... 253 V AC
Width	40 mm
Programming interface	programming socket
Output III	Analog current output