模块-工业控制-模块品牌厂家-买道传感网官网

商品名称： SCHMERSAL 施迈赛 SRB301MC-24V 安全信号处理

商品型号： SRB301MC-24V

品牌名： SCHMERSAL 施迈赛

分类：模块

订货号： 151190684

类型：模块

自动重置功能	是
接触电阻，最大	0.1 Ω
显示运行状态	位置继电器 K2;位置继电器 K1;内部工作电压 U
接地检测	是
停止类别	0
安装	DIN导轨快速安装，依据EN 60715
夹子或端子的保护等级	IP20
电气保险丝	是
频率范围	50 Hz;60 Hz
线缆截面，最小	.25 mm²
夹的紧固力矩	0.6 Nm
工作环境温度	-25 ... +60 °C
污染等级	2
开关容量，最小	10 mA
外壳材料	玻璃纤维加固热塑塑料，带通风
毛重	250 g
抗振动	10 ... 55 Hz，振幅 .35 mm，± 15 %
常闭 (NC) 数量	2
连接器	硬线或软线;螺丝端子 M20 x 1.5
高度	100 mm
储存和运输温度	-40 ... +85 °C
工作电压	24 VAC -15 % / +10 %;24 VDC -10 % / +20 %
纹波电压	10 %
电力功率消耗	4.9 VA
交叉电路检测	是
反馈回路	是
辅助触点数量	1
安全触点数量	3
电缆截面，最大	2.5 mm²
耐冲击	30 g / 11 ms
开关容量，最大	2 A
启动输入	是
额定工作电压	24 VDC
LED灯数量	4
宽度	22.5 mm
深度	121 mm
安装空间的防护等级	IP54
额定冲击耐受电压 U	4 kV
EMC等级	EMC指令
电缆损坏检测	是
任务时间	20 年
外壳防护等级	IP40
传导电阻，最大	40 Ω
过电压级别	III

商品名称： P+F 倍加福 KCD2-STC-1.2O 信号调节器 K-System (DIN rail, highly functional)

商品型号： KCD2-STC-1.2O

品牌名： P+F 倍加福

分类：模块

订货号：

类型：信号转换模块

Systematic capability (SC)	SC 3
Power consumption	2 W
Influence of ambient temperature	current output: 0.25 µA/K voltage output: 80 µV/K
Labeling	space for labeling at the front
Connection	screw terminals
Ripple	max. 50 µA
Frequency range	field side into the control side: bandwidth with 0.5 V signal 0 ... 7.5 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V signal 0.3 ... 7.5 kHz (-3 dB)
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Signal type	Analog input
Rated voltage	U 19 ... 30 V DC
Available voltage	terminals 1+, 2-: ≥ 16 V at 20 mA , ≥ 18.5 V at 4 mA
Settling time	6 ms
Output/power supply	functional insulation, rated insulation voltage 50 V AC
Mass	approx. 100 g
Configuration	via DIP switches
Output signal	0/4 ... 20 mA or 0/1 ... 5 V
Input/Output	basic insulation according to IEC 61010-1, rated insulation voltage 300 V
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Dimensions	12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Short-circuit current	terminals 1+, 2-: 25 mA
Power dissipation	approx. 1.4 W at 20 mA transfer current, 250 Ω in both outputs
Display elements	LED
Load	channel 1: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V) channel 2: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V)
Safety Integrity Level (SIL)	SIL 2
Input resistance	terminals 1+, 2-: max. 500 Ω (BRAIN) (250 Ω load)
Degree of protection	IP20
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
Voltage drop	terminals 3, 4: ≤ 6.1 V at 20 mA
Note	Both output loads must be connected to ensure complete and correct operation within the technical specification.
Input signal	0/4 ... 20 mA
Deviation	I < 20 µA (0.1 %); V < 7.5 mV (0.15 %) incl. calibration, linearity, hysteresis and fluctuation of supply voltage, at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V
Output/Output	functional insulation, rated insulation voltage 50 V AC
Width	12.5 mm
Protection against electrical shock	UL 61010-1:2012
Depth	114 mm
Connection side	control side
Rise time/fall time	2 ms
Input/power supply	basic insulation according to IEC 61010-1, rated insulation voltage 300 V
Electromagnetic compatibility	NE 21:2012 EN 61326-3-2:2008
Height	124 mm