安全传感器-视觉传感器/安全传感器-安全传感器品牌厂家-买道传感网官网

商品名称： SGE-245-2-0300 01000C Omron 欧姆龙安全传感器

商品型号： SGE-245-2-0300 01000C

品牌名： Omron 欧姆龙

分类：安全传感器

订货号： SGE 7587F

类型：安全地毯和触边

商品名称： UE45-3S13D330 Sick 西克安全传感器

商品型号： UE45-3S13D330

品牌名： Sick 西克

分类：安全传感器

订货号：

类型：安全继电器

商品名称： P+F 倍加福 KFD2-BR-1.PA.1500 Segment Coupler for PROFIBUS PA

商品型号： KFD2-BR-1.PA.1500

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Connection	3+, 6+, 2-, 5-, 1 shield, 4 shield
Core cross section	up to 2.5 mm
Rated voltage_1	24 ... 26 V
Power dissipation	max 2.5 W
Connection_1	terminals 7 RxD/TxD-P, 8 RxD/TxD-N, 9 shield, 10 FE
Baud rate	1.5 MBit/s max.
Housing material	Polycarbonate
CSA approval	CSA 16.70064204
Corrosion resistance	acc. to ISA-S71.04-1985, severity level G3
Mounting	DIN rail mounting
PROFIBUS DP/PROFIBUS PA	functional insulation acc. to IEC 62103, rated insulation voltage 50 V AC /70 V DC
Number of segments	1
Shock resistance	15 g 11 ms
Marking	II 3G Ex ec IIC T4 Gc
PROFIBUS DP	PROFIBUS with RS-485 transmission technology
Switch	PROFIBUS DP terminator
LED PA	red 2 Hz flashing: No PA communication or overload Off: PA communication OK
Installation in hazardous area	Zone 2 / Div. 2
LED DP/ERR	red 2 Hz flashing: DP error red on: Hardware error red off: DP communication detected
Electromagnetic compatibility	NAMUR NE 21
Relative humidity	< 95 % non-condensing
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
LED PWR	green: Power on
PROFIBUS DP/Supply	basic insulation according to IEC/EN 61010, rated insulation voltage 253 V AC /357 V DC
Vibration resistance	1 g 10 ... 150 Hz
Pollution degree	max. 2, according to IEC 60664
Mass	180 g
Approved for	Class I, Division 2, Groups A, B, C, D Class I, Zone 2, Ex nA IIC T4 Gc
Climatic conditions	DIN IEC 721
IECEx approval	IECEx TUR 16.0006X
Rated current	max. 400 mA
Directive 2014/30/EU	EN 61326-1:2013
Ambient temperature	-40 ... 60 °C (-40 ... 140 °F)
Certificate	TÜV 16 ATEX 7831 X
Terminating impedance	100 Ω , integrated
PROFIBUS PA/Supply	basic insulation according to IEC/EN 61010, rated insulation voltage 253 V AC /357 V DC
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Connection type	screw terminal , pluggable
Rated voltage	U 12.6 ... 13.4 V
Degree of protection	IP20
Fieldbus standard	EN 50170/2
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018
Approved for_1	Ex ec IIC T4 Gc
Ripple	≤ 10 %

商品名称： TNT35 DC24 Leuze 劳易测安全传感器

商品型号： TNT35 DC24

品牌名： Leuze 劳易测

分类：安全传感器

订货号：

类型：安全继电器

商品名称： KFD2-HLC-EX1.D_eng P+F 倍加福安全传感器

商品型号： KFD2-HLC-EX1.D_eng

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

商品名称： AZ 17-B6 SCHMERSAL 施迈赛安全传感器

商品型号： AZ 17-B6

品牌名： SCHMERSAL 施迈赛

分类：安全传感器

订货号： 151126060

类型：操作钥匙

商品名称： P2HZ X1P 230VAC 3N/O 1N/C 2SO (777438)

商品型号： P2HZ X1P 230VAC 3N/O 1N/C 2SO (777438)

品牌名： Pilz 皮尔磁

分类：安全传感器

订货号： 777438

类型：安全继电器

商品名称： P+F 倍加福 KCD2-SLD-Ex1.1245 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号： KCD2-SLD-Ex1.1245

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-15:2010
Energized/De-energized delay	≤ 20 ms / ≤ 20 ms
Maximum safe voltage_1	U 60 V (Attention! The rated voltage can be lower.)
Rated voltage	U 19 ... 30 V DC loop powered
Marking	II 3(1)G Ex nC ec [ia Ga] IIC T4 Gc [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating.
Voltage	U 26 V
Signal type	Digital Output
Maximum safe voltage_2	U 60 V (Attention! The rated voltage can be lower.)
Power	P 715 mW
Protection against electrical shock	EN 61010-1:2010
Internal resistor	R 240 Ω
Output II/power supply	basic insulation according to IEC/EN 61010-1, rated insulation voltage 32 V
Connection_1	terminals 7, 8 , non-intrinsically safe
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Labeling	space for labeling at the front
Electromagnetic compatibility	NE 21:2012 , EN 61326-3-2:2008 For further information see system description.
Maximum safe voltage	U 60 V (Attention! The rated voltage can be lower.)
UL approval	E106378
Output I	Ex ia
Output II	fault signal
Rated current	I 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card)
Degree of protection	IP20
Contact loading	30 V DC/ 0.5 A resistive load
IECEx certificate	IECEx EXA 17.0001X
IECEx marking	Ex nC ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
Load	nominal 0.05 ... 18 kΩ , valid range for line fault detection (LFD)
Current limit	I 50 mA
Output/other circuits	basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Mass	approx. 150 g
EU-type examination certificate	EXA 17 ATEX 0002 X
Control drawing	116-0448 (cULus)
Power dissipation	1.3 W at 24 V , 270 Ω load
Connection side	field side
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Control elements	DIP switch
Configuration	via DIP switches
Safety Integrity Level (SIL)	SIL 3
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Connection	screw terminals
Mechanical life	10 switching cycles
Current	I 110 mA
Signal level	loop powered 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 30 V DC (current limited to 5 mA) 0-signal: 0 ... 5 V DC
Open loop voltage	U typ. 24.6 V
Systematic capability (SC)	SC 3
Test pulse length	max. 2 ms from DO card
Output I/other circuits	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V
Dimensions	12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Input current	75 mA at 24 V , 270 Ω load
Display elements	LEDs
Inrush current	< 200 mA , 10 ms loop powered
Test current	max. 350 µA , calculated by I = 4.7 V / (15 kΩ + R )

商品名称： P+F 倍加福 KFD2-UFC-Ex1.D SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： KFD2-UFC-Ex1.D

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Control drawing	16-538FM-12
Connection side	control side
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Maximum safe voltage	U 40 V DC (Attention! U is no rated voltage.)
Active/Passive	I > 4 mA (for min. 100 ms) / I < 1.5 mA
Collective error message	Power Rail
Current I	13.5 mA
Degree of protection	IP20
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Labeling	space for labeling at the front
IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex ec nC IIC T4 Gc
Load	max. 650 Ω
Measuring range	0.001 ... 5000 Hz
Accuracy	0.1 % of the measurement value , > 0.001 Hz
Maximum safe voltage_1	U 253 V (Attention! The rated voltage can be lower.)
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Directive 2014/35/EU	EN 61010-1:2010
Certificate	TÜV 02 ATEX 1885 X
Power dissipation/power consumption	≤ 2 W / 2.2 W
Input I	terminals 1+, 3-: Ex ia
Input II	terminals 13+, 14- non-intrinsically safe
Signal level	1-signal: (L+) - 2.5 V (50 mA, short-circuit/overload proof) 0-signal: switched off (off-state current ≤ 10 µA)
Output IV	terminals 8+, 7- non-intrinsically safe
Output IV/power supply and collective error	functional insulation acc. to IEC 62103, rated insulation voltage 50 V
Safety Integrity Level (SIL)	SIL 2
Rated voltage	U 20 ... 30 V DC
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Connection	screw terminals
Electromagnetic compatibility	NE 21:2006
Output I, II	terminals 10, 11, 12; 16, 17, 18 non-intrinsically safe
Fault signal	downscale I ≤ 3.6 mA , upscale ≥ 21.5 mA (acc. NAMUR NE43)
Output III/power supply and collective error	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Voltage U	10.1 V
Rated current	I approx. 100 mA
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
Line fault detection	breakage I ≤ 0.15 mA; short-circuit I > 6.5 mA
Output III	terminals 19+, 20- non-intrinsically safe
Current range	0 ... 20 mA or 4 ... 20 mA
Open loop voltage	max. 24 V DC
Output III/start-up override	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Start-up override/power supply and collective error	functional insulation acc. to IEC 62103, rated insulation voltage 50 V
Control elements	Control panel
Power P	34 mW (linear characteristic)
Maximum safe voltage U	40 V (Attention! The rated voltage can be lower.)
Programming interface	programming socket
Influence of ambient temperature	0.003 %/K (30 ppm)
Response delay	≤ 200 ms
Mutual output I, II, III	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Output III/IV	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Depth	115 mm
Maximum safe voltage_2	U 40 V DC (Attention! U is no rated voltage.)
Mass	300 g
Energized/De-energized delay	approx. 20 ms / approx. 20 ms
Input frequency	0.001 ... 5000 Hz
Influence of ambient temperature_1	0.005 %/K (50 ppm)
EU-type examination certificate	TÜV 99 ATEX 1471
Resolution	0.1 % of the measurement value , ≥ 0.001 Hz
Measuring time	< 100 ms
Output I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Input	EN 60947-5-6:2000
Height	119 mm
Width	40 mm
Dimensions	40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Signal type	Digital Input
Contact loading	253 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load
Mechanical life	5 x 10 switching cycles
Marking_1	II 3G Ex nA nC IIC T4 Gc
Resolution_1	< 10 µA
Input I/other circuits	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Interface/output III	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Configuration	via operating buttons via PACTware
Display elements	LEDs , display
IECEx certificate	IECEx TUN 04.0007 IECEx TSA 18.0007X
Pulse duration	> 50 µs
Open circuit voltage/short-circuit current	18 V / 5 mA
Contact loading_1	50 V AC/2 A/cos φ > 0.7; 40 V DC/2 A resistive load
Accuracy_1	< 20 µA
Interface/power supply and collective error	functional insulation acc. to IEC 62103, rated insulation voltage 50 V
Maximum safe voltage U_1	U 40 V (Attention! U is no rated voltage.)
Interface	RS 232
UL approval	E223772

商品名称： P+F 倍加福 M-LB-2.255.T3.D Surge Protection Barriers 用于电源线保护的设备

商品型号： M-LB-2.255.T3.D

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Voltage protection level	U max. 1.25 kV (L-N) max. 1.5 kV (L/N-PE)
Depth	72 mm
Nominal discharge current (8/20 µs)	I 3 kA
Housing	thermoplastic, color grey , UL 94 V-0
Core cross section	- min. 0.5 mm solid/flexible - max. 4 mm stranded/2.5 mm flexible
Number of protected supply lines	2
Reaction time	t max. 25 ns (L-N) max. 100 ns (L/N-PE)
Switch power	AC: 250 V / 0.5 A DC: 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A; 24 V/0.5 A
Dimensions	18 x 90 x 72 mm (0.7 x 3.6 x 2.8 inch) (W x H x D) , 1 TE acc. to DIN 43880
Nominal load current	I 25 A
Max. surge current (8/20 µs)	I 5 kA
Degree of protection	IP20
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Maximum continuous operating voltage	U 255 V AC, 50 ... 60 Hz 255 V DC
Height	90 mm
Shock resistance	EN 60068-2:2010
Nominal voltage	230 V AC, 50 ... 60 Hz
Overcurrent protection	max. 25 A gL/gG (B 25 A) , mains-side
Output	volt-free change-over contact
Ambient temperature	-40 ... 80 °C (-40 ... 176 °F)
Vibration resistance	EN 60068-2:2010
Suitable components	protection module M-LB-2.255.T3.M
Display elements	status display operating state (green) fault indication (red)
Relative humidity	5 ... 95 %
Mounting location	indoor
Mass	approx. 120 g
Device type	type 3 acc. to EN 61643-11:2013 class III acc. to IEC 61643-1:2011
Temporary over-voltage	U 335 V/5 s (TOV withstand) (L-N) 400 V/5 s (TOV withstand) (L/N-PE) 1200 V+U /200 ms (TOV safe failure) (L+N-PE) 5 s (TOV withstand)
Short-circuit-proof	6 kA at max. mains-side overcurrent protection
Connection	terminals 11, 12, 14
Directive 2014/35/EU	EN 61643-11:2012
Width	18 mm