安全传感器-视觉传感器/安全传感器-安全传感器品牌厂家-买道传感网官网

商品名称： AZ 415-02/02YPK-2537-1 SCHMERSAL 施迈赛安全传感器

商品型号： AZ 415-02/02YPK-2537-1

品牌名： SCHMERSAL 施迈赛

分类：安全传感器

订货号： 101183922

类型：安全开关

商品名称： P+F 倍加福 KCD2-STC-Ex1.2O.ES SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号： KCD2-STC-Ex1.2O.ES

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：安全栅

Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Control drawing	116-0380 (cULus)
Ripple	max. 50 µA
Voltage_1	U 28.2 V
Internal inductance	L 0 mH
Dimensions	12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Available voltage	terminals 1+, 2-: ≥ 16 V at 20 mA , ≥ 18.5 V at 4 mA
Frequency range	field side into the control side: bandwidth with 0.5 V signal 0 ... 6 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V signal 0.3 ... 6 kHz (-3 dB)
Internal capacitance	C 10 nF
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Power dissipation	approx. 1.4 W at 20 mA transfer current, 250 Ω in both outputs
Connection	screw terminals
Electromagnetic compatibility	NE 21:2012 EN 61326-3-2:2008
Maximum safe voltage	U 250 V (Attention! The rated voltage can be lower.)
IECEx certificate	IECEx BAS 13.0043X
Height	124 mm
Output/power supply	functional insulation, rated insulation voltage 50 V AC
Input signal	0/4 ... 20 mA
Output signal	0/4 ... 20 mA or 0/1 ... 5 V
Current_1	I 115 mA
Voltage_3	U 5 V
Safety Integrity Level (SIL)	SIL 3
EU-type examination certificate	BASEEFA 13 ATEX 0077 X
Display elements	LED
Certificate	BASEEFA 13 ATEX 0078 X
Load	channel 1: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V) channel 2: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V)
Width	12.5 mm
Power	P 656 mW
Systematic capability (SC)	SC 3
Deviation	I < 20 µA (0.1 %); V < 10 mV (0.2 %) incl. calibration, linearity, hysteresis and fluctuation of supply voltage, at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V
Settling time	6 ms
Degree of protection	IP20
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Rated voltage	U 19 ... 30 V DC
Mass	approx. 100 g
Voltage	U 25.2 V
Output/Output	functional insulation, rated insulation voltage 50 V AC
Influence of ambient temperature	current output: 0.25 µA/K voltage output: 80 µV/K
Rise time/fall time	2 ms
Equipment_1	terminals 3+, 4-
Power_2	P 1.6 mW
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
Connection side	control side
Marking_1	II 3G Ex nA IIC T4 Gc
Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Protection against electrical shock	UL 61010-1:2012
Power consumption	2 W
Voltage_2	U 30 V
Current_2	I 6.8 mA
Short-circuit current	terminals 1+, 2-: 25 mA
Note	Both output loads must be connected to ensure complete and correct operation within the technical specification.
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Current	I 93 mA
Input	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Input resistance	terminals 1+, 2-: max. 500 Ω (BRAIN) (250 Ω load)
Equipment	terminals 1+, 2-
Labeling	space for labeling at the front
Power_1	P 700 mW
Signal type	Analog input
Control elements	DIP switch
Configuration	via DIP switches
Depth	114 mm
Maximum safe voltage_1	U 250 V (Attention! The rated voltage can be lower.)
Voltage drop	terminals 3, 4: ≤ 6.1 V at 20 mA