模块-工业控制-模块品牌厂家-买道传感网官网

商品名称： P+F 倍加福 NDP-KE2-8E2-FP 附件无线感应系统 WIS

商品型号： NDP-KE2-8E2-FP

品牌名： P+F 倍加福

分类：模块

订货号：

类型：控制模块

防护等级	IP20
安装	DIN 导轨安装
工作电压	U 24 V DC ± 10 %
标准	EN IEC 60947-5-2
编号	1
输出类型	1 个状态输出（正确传输时为高电平）和 8 路开关输出，PNP，常开（高电平切换），防过载和短路
电流消耗	最大 1000 mA
输入类型	激活输入信号电平：≥ 15 V = 激活，≤ 3 V 未激活
注意	WIS 模块和 WIS 发射器之间的最大缆线长度不得超过 5 m。
电压降	U ≤ 2,5 V
信号通道数	8
开关状态	8 x 黄色 LED
任务时间 (T	) 20 a
内阻抗	≥ 15 kΩ
CCC 认证	额定电压 ≤ 36 V 时，产品不需要 CCC 认证/标记
外壳	PA 66-FR
反极性保护	反极性保护
传输指示器	Tx 绿色 LED
信号传输方向	从次级侧到初级侧
诊断覆盖率 (DC)	0 %
存储温度	-25 ... 85 °C (-13 ... 185 °F)
负载电流	最大 50 mA
质量	106 g
输入电流	≤ 1 mA
EMC 指令 89/336/EEC	EN 61000-6-2:2001、EN 61000-6-4:2001、EN 50295:1999
环境温度	0 ... 50 °C (32 ... 122 °F)
MTTF	245 a
响应时间	≤ 200 ms ( 静态工作，传输头相对而设 )

商品名称： P+F 倍加福 NDP-KE2-8E2 附件无线感应系统 WIS

商品型号： NDP-KE2-8E2

品牌名： P+F 倍加福

分类：模块

订货号：

类型：控制模块

外壳	PA 66-FR
MTTF	245 a
编号	1
输入类型	激活输入信号电平：≥ 15 V = 激活，≤ 3 V 未激活
EMC 指令 89/336/EEC	EN 61000-6-2:2001、EN 61000-6-4:2001、EN 50295:1999
开关状态	8 x 黄色 LED
任务时间 (T	) 20 a
防护等级	IP20
存储温度	-25 ... 85 °C (-13 ... 185 °F)
质量	106 g
环境温度	0 ... 50 °C (32 ... 122 °F)
传输指示器	Tx 绿色 LED
信号传输方向	从次级侧到初级侧
电流消耗	最大 1000 mA
响应时间	≤ 200 ms ( 静态工作，传输头相对而设 )
输入电流	≤ 1 mA
工作电压	U 24 V DC ± 10 %
反极性保护	反极性保护
电压降	U ≤ 2,5 V
安装	DIN 导轨安装
信号通道数	8
内阻抗	≥ 15 kΩ
负载电流	最大 50 mA
CCC 认证	额定电压 ≤ 36 V 时，产品不需要 CCC 认证/标记
诊断覆盖率 (DC)	0 %
注意	WIS 模块和 WIS 发射器之间的最大缆线长度不得超过 5 m。
输出类型	1 个状态输出（正确传输时为高电平）和 8 路开关输出，PNP，常开（高电平切换），防过载和短路

商品名称： P+F 倍加福 KFD2-HLC-Ex1.D.2W 本质安全型隔离栅 K-System (DIN rail mounting)

商品型号： KFD2-HLC-Ex1.D.2W

品牌名： P+F 倍加福

分类：模块

订货号：

类型：信号转换模块

Rated voltage	U 19 ... 30 V DC
Labeling	space for labeling at the front
Electromagnetic compatibility	NE 21:2006
Dimensions	40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Connection side	control side
Maximum safe voltage	U 253 V AC (Attention! The rated voltage can be lower.)
Current range	4 ... 20 mA , (source or sink mode)
Height	119 mm
Control drawing	116-0129
Signal type	Analog input
Load	max. 650 Ω , source mode
Current	I 104.9 mA
Accuracy	< 20 µA, 10 µA typ.
Output I, II/other circuits	reinforced insulation acc. to IEC 62103, rated insulation voltage 300 V
Maximum safe voltage_2	U 253 V (Attention! U is no rated voltage.)
Other outputs	HART communicator on terminals 22, 24
Connection	screw terminals
Contact loading	253 V AC/1 A/cos φ > 0.7; 30 V DC/1 A resistive load (BASEEFA 07 ATEX 0174) 50 V AC/1 A/cos φ > 0.7; 30 V DC/1 A resistive load (Pepperl+Fuchs self-declaration)
Configuration	via operating buttons via PACTware
IECEx certificate	IECEx BAS 07.0047
Depth	115 mm
Marking_1	II 3G Ex nA nC IIC T4 Gc
Collective error message	Power Rail and LED red
Available voltage	≥ 15.5 V at 20 mA, short-circuit protected
Power_1	P < 1.33 W
Internal capacitance_1	C 0 µF
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC
Rated current	I approx. 130 mA at 24 V DC
Open circuit voltage/short-circuit current	typ. 24 V / 28 mA
Equipment_1	terminals 2, 5/3
Fault signal	downscale I ≤ 2 mA, upscale I ≥ 21.5 mA (acc. NAMUR NE43) or hold measurement value
Display elements	LEDs , display
Mass	300 g
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Certificate	PF 07 CERT 1141 X
EU-type examination certificate	BASEEFA 07 ATEX 0174
Voltage	U 25.2 V
Influence of ambient temperature	< ± 2 µA/K
Internal capacitance	C 1.1 nF
Relay	programmable either for fault or trip value (with direction, hysteresis and delay)
Output III/IV/V/power supply	functional insulation acc. to IEC 62103, rated insulation voltage 50 V
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Power	P 0.661 W
Duration of measurement/Response delay	HART message acquisition time plus 100 ms
Voltage_1	U < 28 V
Current_1	I 11.9 mA
Power dissipation	2.5 W
Energized/De-energized delay	approx. 20 ms / approx. 20 ms
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Directive 2014/35/EU	EN 61010-1:2010
Mechanical life	10 switching cycles
Maximum safe voltage_1	U 253 V (Attention! U is no rated voltage.)
Power consumption	3.1 W
Output I, II	terminals 10, 11, 12; 16, 17, 18 , non-intrinsically safe
Output signal	relay and LED yellow
Equipment	terminals 1, 4/3 (with link between terminals 4 and 5)
Internal inductance	L 0 mH
Internal inductance_1	L 0 mH
Output III, IV, V	terminals 7, 8, 9; 13, 14, 15; 19, 20, 21 , non-intrinsically safe
Voltage range	5 ... 30 V , sink mode from external supply
Width	40 mm
Input resistance	250 Ω , 5 % (terminals 2, 3 and with jumper on 5, 6)
Resolution	max. 2 µA
Voltage_2	U 1.1 V
Control elements	Control panel
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Degree of protection	IP20
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC
Programming interface	programming socket
Conformity	HART field device input (revision 5 to 7)
Power_2	P 4 mW
Input/Other circuits	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Output signal_1	analog
Output I/II	functional insulation acc. to IEC 62103, rated insulation voltage 250 V