买道传感网

分类

安全传感器-视觉传感器/安全传感器-安全传感器品牌厂家-买道传感网官网

P+F 倍加福 KFD0-SCS-Ex1.55 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品名称: P+F 倍加福 KFD0-SCS-Ex1.55 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号: KFD0-SCS-EX1.55

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Power dissipation 150 mW at 20 mA and U < 24 V
Labeling space for labeling at the front
Mass approx. 120 g
Connection screw terminals
Marking_1 II 3G Ex nA IIC T4 Gc
Influence of ambient temperature < 0.5 µA/K
Height 112 mm
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Electromagnetic compatibility NE 21:2007
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Current I 28 mA
Voltage drop see note
Rise time ≤ 20 µs at 0 Ω, ≤ 600 µs with 800 Ω load
Voltage U 23.1 V DC
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Load ≤ 800 Ω (at 20 mA)
Width 20 mm
Degree of protection IP20
Marking II (2)G [Ex ib Gb] IIC
Depth 115 mm
EU-type examination certificate PTB 02 ATEX 2064
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Certificate PF 11 CERT 0902 X
Power P 0.647 W
Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Maximum safe voltage U 253 V (Attention! The rated voltage can be lower.)
Safety Integrity Level (SIL) SIL 2
Rated voltage U < 30 V DC , loop powered
Dimensions 20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2
Signal type Analog input/analog output
After calibration ≤ ± 80 µA linearity, load and voltage dependence at 20 °C (68 °F)
Damping approx. 3 dB
P+F 倍加福 P-LB-1.B.12 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品名称: P+F 倍加福 P-LB-1.B.12 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号: P-LB-1.B.12

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Marking II (1)G [Ex ia Ga] IIC
Asymmetric 100 ns
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Certificate PF 16 CERT 3908 X
Number of protected signal lines 2
Mass approx. 70 g
Dimensions 20 x 104 x 127 mm (0.8 x 4.1 x 5 inch) (W x H x D)
Bandwidth ≥ 40 kHz
Internal inductance L 200 µH
On-state voltage max. 45 V
Voltage U 30 V
Marking_1 II 3G Ex nA IIC T4 Gc
Rated current I max. 250 mA
Maximum leakage current 10 kA (8/20 µs) per conductor
IECEx certificate IECEx BAS 12.0123
Rated voltage U max. 30 V
Ground insulation max. 500 V breakdown voltage
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Safety Integrity Level (SIL) SIL 3
Leakage current max. 5 µA
Degree of protection IP20
Series resistor ≤ 0.5 Ω per wire
Symmetrical 1 ns
IECEx marking [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Mounting on the KF module
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
Connection terminals 1, 2
Current I 250 mA
Internal capacitance C negligible
EU-type examination certificate PTB 02 ATEX 2044
P+F 倍加福 HiD2822 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品名称: P+F 倍加福 HiD2822 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号: HiD2822

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Degree of protection IP20
Mass approx. 140 g
Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
IECEx certificate IECEx CES 21.0011
Height 114 mm
Width 18 mm
Rated values acc. to EN 60947-5-6 (NAMUR)
Directive 2014/34/EU EN IEC 60079-0:2018 , EN 60079-11:2012
Output/Output basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Labeling space for labeling at the front
Output signal: 2 relays SPST per channel, phase selectable
Maximum safe voltage U 250 V AC (Attention! U is no rated voltage.)
Pulse/Pause ratio min. 20 ms / min. 20 ms
Output/power supply basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
CSA approval CoC 80097459 (cCSAus)
Rated voltage U 19 ... 30 V DC bus powered via Termination Board
Display elements LEDs
Control elements DIP switch
Configuration via DIP switches
Input Ex ia
Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
Coding pin 1 and 2 trimmed For further information see system description.
Rated current I 45 mA at 24 V, relay energized
EU-type examination certificate CESI 21 ATEX 017
Line fault detection breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Open circuit voltage/short-circuit current approx. 10 V DC / approx. 8 mA
Mounting on termination board
Switching frequency < 10 Hz
Electromagnetic compatibility NE 21:2017 EN 61326-3-2:2018 For further information see system description.
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Response time 20 ms
Output type open collector transistor (internal fault bus)
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Power dissipation 1.1 W at 24 V
Mechanical life 10 switching cycles
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Current I 20 mA
Power P 66 mW
Input/input safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 60 V
Factory setting input closed, relay energized, lead fault detection enabled
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Connection SL1: 6b
Depth 130 mm
Safety Integrity Level (SIL) SIL 2
Dimensions 18 x 114 x 130 mm (0.7 x 4.5 x 5.1 inch) (W x H x D)
Contact loading 50 V DC / 0.5 A non-inductive
Input/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Connection side control side
Voltage U 13.2 V
Control drawing 116-0487 (cCSAus)
Signal type Digital Input
Protection against electrical shock UL 61010-1:2012
P+F 倍加福 KFD2-SH-Ex1 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品名称: P+F 倍加福 KFD2-SH-Ex1 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号: KFD2-SH-Ex1

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Input Ex ia
Input/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Power consumption max. 2.3 W
Relay de-energized I < 2.1 mA and I > 5.9 mA
Relay energized 2.8 mA < I < 5.3 mA
Directive 2006/42/EC EN/ISO 13849-1:2015
Rated current I ≤ 130 mA
Mass approx. 280 g
Connection screw terminals
Maximum safe voltage U 40 V AC/DC (Attention! The rated voltage can be lower.)
Certificate TÜV 99 ATEX 1493 X
Marking_1 II 3G Ex ec nC IIC T4 Gc
Output I relay , signal
Rated voltage 10 ... 30 V DC
Degree of protection IP20
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
EU-type examination certificate PTB 00 ATEX 2042
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Electromagnetic compatibility NE 21:2017 , EN 61326-3-1:2017
IECEx marking Ex ec nC IIC T4 Gc
Mutual output I, II, III basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Output/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Contact loading_1 50 V AC/1 A/cos φ > 0.7; 24 V DC/1 A resistive load
Maximum safe voltage_1 U output I/output II: 253 V AC/DC (Attention! U is no rated voltage.) output III: 60 V AC/DC (Attention! U is no rated voltage.)
Power P 41 mW (linear characteristic)
Output II relay , signal
Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Contact loading 50 V AC/1 A/cos φ > 0.7; 24 V DC/1 A resistive load
Response delay ≤ 1 ms
Ripple ≤ 10 %
Mechanical life_1 50 x 10 switching cycles
Labeling space for labeling at the front
Current I 16.8 mA
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019
Safety IEC/EN 61508:2010
Dimensions 40 x 107 x 115 mm (1.6 x 4.2 x 4.5 inch) (W x H x D) , housing type C1
Voltage U 9.56 V
Signal type Digital Input
Power dissipation 2.1 W
Display elements LEDs
Systematic capability (SC) SC 3
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Control drawing 116-0158
Connection side control side
Open circuit voltage/short-circuit current approx. 8.4 V DC / approx. 11.7 mA
Signal level 1-signal: (L+) -2.5 V (7 mA, short-circuit proof) / 0-signal: blocked output (Leakage current ≤ 10 µA)
Performance level (PL) PL d
Safety Integrity Level (SIL) SIL 3
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Mechanical life 50 x 10 switching cycles
Switching frequency 5 Hz
IECEx certificate IECEx TUN 19.0013X
Output III electronic output, passive , fault signal
Lead resistance ≤ 50 Ω, in hazardous area cable capacitances and inductivities are to be taken into account
P+F 倍加福 S1SD-1AI-2U 信号调节器 SC-System (DIN rail, compact design)

商品名称: P+F 倍加福 S1SD-1AI-2U 信号调节器 SC-System (DIN rail, compact design)

商品型号: S1SD-1AI-2U

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Power consumption 1.4 W
Labeling space for labeling at the front
IECEx marking Ex nA IIC T4 Gc
Output signal_1 0/1 ... 5 V, 0/2 ... 10 V , load ≥ 5 kΩ 0/4 ... 20 mA , load ≤ 300 Ω
Signal type Analog input
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Width 6.2 mm
UL approval E106378
Input/Other circuits safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V test voltage 3 kV, 50 Hz, 1 min
Rated voltage U 16.8 ... 31.2 V DC
Power dissipation 0.8 W
Open circuit voltage/short-circuit current ≤ 22 V / 35 mA
Available voltage 16 V at 20 mA
Depth 107 mm
Damaging gas designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
IECEx certificate IECEx UL 16.0116X
Connection_1 terminals 7+, 8-
Protection against electrical shock EN 61010-1:2010
Connection side control side
Output signal 0/1 ... 5 V, 0/2 ... 10 V , load ≥ 5 kΩ 0/4 ... 20 mA , load ≤ 300 Ω
Influence of ambient temperature < 100 ppm/K of full-scale value
Frequency range 0 ... 100 Hz
Ripple ≤ 10 mV
Output/power supply safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V test voltage 3 kV, 50 Hz, 1 min
Mass approx. 70 g
Height 97 mm
Certificate DEMKO 16 ATEX 1750X
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-15:2010
Output I/II safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V test voltage 3 kV, 50 Hz, 1 min
Degree of protection IP20
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Dimensions 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Operation time MTBF: 272 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F)
Accuracy max. 0.1 % of full-scale value
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Core cross section 0.5 ... 2.5 mm (20 ... 14 AWG)
Marking II 3G Ex nA IIC T4 Gc
Connection screw terminals
Input signal 0/4 ... 20 mA 0/2 ... 10 V
Input resistance ≤ 25 Ω
Rise time/fall time ≤ 3.5 ms
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Transmission range linearity range: -1 ... 110 %
P+F 倍加福 HiD2030 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品名称: P+F 倍加福 HiD2030 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号: HiD2030

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Safety Integrity Level (SIL) SIL 2
Directive 2014/34/EU EN 60079-0:2018 , EN 60079-11:2012
IECEx certificate IECEx CSAE 21.0010X
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Width 18 mm
Output/power supply basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Factory setting 4 ... 20 mA
Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Input/Output safe electrical isolation acc. to IEC 60079-11:2007, voltage peak value 375 V
Influence of ambient temperature ≤ 2 µA/K
Height 114 mm
Response time 70 ms , 10 ... 90 % step change
Power P 605 mW
Coding pin 1 and 3 trimmed For further information see system description.
Deviation at 20 °C (68 °F), 0/4 ... 20 mA ≤ 20 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage
CSA approval CoC 80072560 (cCSAus)
Communication pass-through of HART signal to safe area The current sink terminals 4, 7 and 5, 6 do not pass HART signal to safe area.
Mounting on termination board
Voltage U 26 V
Signal type Analog input
Connection side control side
Connection SL1: 6b
Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Labeling space for labeling at the front
Input/power supply safe electrical isolation acc. to IEC 60079-11:2007, voltage peak value 375 V
Input resistance < 40 Ω , for current source
Power dissipation 800 mW at 24 V, 250 Ω load, 20 mA output (per channel)
Display elements LEDs
Current I 93 mA
Configuration via DIP switches
Output signal 4 ... 20 mA or 1 ... 5 V (on 250 Ω, 0.1 % internal shunt)
Dimensions 18 x 114 x 130 mm (0.7 x 4.5 x 5.1 inch) (W x H x D)
Electromagnetic compatibility NE 21:2017 EN 61326-3-2:2018
Frequency range field side into the control side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB)
Input/input safe electrical isolation acc. to EN 60079-11:2007, voltage peak value 60 V
Relative humidity 5 ... 90 %, non-condensing up to 35 °C (95 °F)
Degree of protection IP20
EU-type examination certificate CSANe 21 ATEX 2149 X
Output/Output functional insulation, rated insulation voltage 50 V AC
Load 0 ... 650 Ω
Input Ex ia, Ex iaD
Protection against electrical shock UL 61010-1:2012
Rated voltage U 19 ... 30 V DC bus powered via Termination Board
Mass 140 g
Control drawing 116-0486
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Control elements DIP switch
Output type open collector transistor (common to both channels) fault bus signal, collective error message
Rated current I 37 mA at 24 V, 250 Ω load, 20 mA output (per channel)
Input current 4 ... 20 mA , current limit approx. 26 mA typ.
Maximum safe voltage U 250 V AC (Attention! U is no rated voltage.)
Signal level no fault: 1 mA ... 23.5 mA input current fault detection: < 0.2 mA or > 24 mA input current
Depth 130 mm
Systematic capability (SC) SC 3
Ripple 10 mV on a load of 250 Ω
P+F 倍加福 KCD2-SCD-Ex1 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品名称: P+F 倍加福 KCD2-SCD-Ex1 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号: KCD2-SCD-Ex1

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Mass approx. 100 g
Dimensions 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
EU-type examination certificate CESI 06 ATEX 021 X
Voltage U 25.2 V
Electromagnetic compatibility NE 21:2017 EN 61326-3-2:2018
Current I 100 mA
Load 0 ... 650 Ω
Output/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Safety Integrity Level (SIL) SIL 2
Connection screw terminals
Input voltage open loop voltage of the control system < 30 V
Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Rated voltage U 19 ... 30 V DC
Certificate CESI 19 ATEX 021 X
Power P 630 mW
Display elements LED
Input signal 4 ... 20 mA , limited to approx. 26 mA
Control drawing_1 116-0459 (cULus)
IECEx certificate IECEx CES 06.0001X
Influence of ambient temperature < 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F))
UL approval E106378
Ripple 20 mV
Input/power supply basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Deviation at 20 °C (68 °F), 4 ... 20 mA < 0.1 % of full scale, incl. non-linearity and hysteresis
Frequency range field side into the control side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB)
Output Ex ia
Maximum safe voltage U 250 V AC (Attention! U is no rated voltage.)
Systematic capability (SC) SC 3
Protection against electrical shock UL 61010-1:2019
Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Labeling space for labeling at the front
Marking_1 II 3G Ex ec IIC T4 Gc
Height 124 mm
Voltage drop approx. 6 V at 20 mA
Rated current I ≤ 30 mA at 24 V
Directive 2014/34/EU EN IEC 60079-0:2018 , EN 60079-11:2012 , EN IEC 60079-7:2015+A1:2018
Connection side field side
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
Width 12.5 mm
Power consumption ≤ 700 mW
Equipment terminals 1+, 2-
Internal inductance L negligible
FM certificate FM 18 CA 0116 X , FM 19 US 0117 X
Ambient temperature -40 ... 70 °C (-40 ... 158 °F)
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Rise time 10 to 90 % ≤ 10 ms
Input resistance > 100 kΩ, with field wiring open
Internal capacitance C 5.7 nF
Degree of protection IP20
Control drawing 116-0469 (cFMus)
Signal type Analog output
Power dissipation ≤ 600 mW at 20 mA and 500 Ω load
Depth 114 mm
P+F 倍加福 KCD2-SLD-Ex1.1065 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品名称: P+F 倍加福 KCD2-SLD-Ex1.1065 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号: KCD2-SLD-EX1.1065

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Control drawing 116-0448 (cULus)
Connection side field side
Input current 80 mA at 24 V
Labeling space for labeling at the front
Test current max. 350 µA , calculated by I = 4.7 V / (15 kΩ + R )
Safety Integrity Level (SIL) SIL 3
Degree of protection IP20
Marking II 3(1)G Ex nC ec [ia Ga] IIC T4 Gc [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Signal type Digital Output
Connection screw terminals
Energized/De-energized delay ≤ 20 ms / ≤ 20 ms
Display elements LEDs
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Electromagnetic compatibility NE 21:2012 , EN 61326-3-2:2008 For further information see system description.
Configuration via DIP switches
Protection against electrical shock EN 61010-1:2010
Output II/power supply basic insulation according to IEC/EN 61010-1, rated insulation voltage 32 V
Connection_1 terminals 7, 8 , non-intrinsically safe
Voltage U 17.3 V
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Contact loading 30 V DC/ 0.5 A resistive load
Mechanical life 10 switching cycles
Output II fault signal
Rated voltage U 19 ... 30 V DC loop powered
Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
EU-type examination certificate EXA 17 ATEX 0002 X
Current I 220 mA
IECEx certificate IECEx EXA 17.0001X
Signal level loop powered 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 30 V DC (current limited to 5 mA) 0-signal: 0 ... 5 V DC
Open loop voltage U typ. 16.4 V
Control elements DIP switch
Internal resistor R 80 Ω
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-15:2010
Power dissipation 1.3 W at 24 V
Maximum safe voltage U 60 V (Attention! The rated voltage can be lower.)
Systematic capability (SC) SC 3
Output I Ex ia
Test pulse length max. 2 ms from DO card
Ambient temperature -20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating.
Mass approx. 150 g
IECEx marking Ex nC ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
Load nominal 0.05 ... 18 kΩ , valid range for line fault detection (LFD)
Rated current I 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card)
Maximum safe voltage_1 U 60 V (Attention! The rated voltage can be lower.)
Maximum safe voltage_2 U 60 V (Attention! The rated voltage can be lower.)
Power P 947 mW
Current limit I 65 mA
Inrush current < 200 mA , 10 ms loop powered
UL approval E106378
Output/other circuits basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Output I/other circuits safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V
P+F 倍加福 KCD2-ST-1.LB 信号调节器 K-System (DIN rail, highly functional)

商品名称: P+F 倍加福 KCD2-ST-1.LB 信号调节器 K-System (DIN rail, highly functional)

商品型号: KCD2-ST-1.LB

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Protection against electrical shock IEC 61010-1:2010
Height 119 mm
Line fault detection breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Connection screw terminals
Input/power supply reinforced insulation acc. to EN 50178, rated insulation voltage 300 V
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Degree of protection IP20
Ambient temperature -20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
Mass approx. 100 g
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Configuration via DIP switches
Output/power supply not available , common pole terminal 9+
Display elements LEDs
Depth 114 mm
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Rated values acc. to EN 60947-5-6 (NAMUR)
Rated voltage U 30 V DC
Connection side control side
Labeling space for labeling at the front
Collective error message Power Rail
Output I signal ; Transistor
Response time ≤ 200 µs
Signal type Digital Input
Width 12.5 mm
Switching frequency ≤ 5 kHz
Output II signal or fault message ; Transistor
Ripple ≤ 10 %
Input/Output reinforced insulation acc. to EN 50178, rated insulation voltage 300 V
Safety Integrity Level (SIL) SIL 2
Systematic capability (SC) SC 3
Power dissipation ≤ 700 mW including maximum power dissipation in the output
Output/Output not available , common pole terminal 9+
Electromagnetic compatibility NE 21:2011
Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Signal level 1-signal: (supply voltage) - 3 V max. for 50 mA 0-signal: blocked output (off-state current ≤ 10 µA)
Input EN 60947-5-6:2000
Open circuit voltage/short-circuit current approx. 10 V DC / approx. 8 mA
Rated current I 50 mA
Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
Pulse/Pause ratio min. 100 µs / min. 100 µs
P+F 倍加福 KCD2-SR-2 信号调节器 K-System (DIN rail, highly functional)

商品名称: P+F 倍加福 KCD2-SR-2 信号调节器 K-System (DIN rail, highly functional)

商品型号: KCD2-SR-2

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Connection screw terminals
Output/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Width 12.5 mm
Rated current I ≤ 46 mA
Output I signal ; relay
Functional safety IEC/EN 61508:2010
Degree of protection IP20
Mass approx. 100 g
Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
Systematic capability (SC) SC 3
Power consumption ≤ 900 mW
Labeling space for labeling at the front
Depth 114 mm
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Energized/De-energized delay ≤ 20 ms / ≤ 20 ms
Power dissipation ≤ 900 mW
Open circuit voltage/short-circuit current approx. 8 V DC / approx. 8 mA
Input/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Line fault detection breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Signal type Digital Input
Display elements LEDs
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Ripple ≤ 10 %
Input/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Height 119 mm
Contact loading 250 V AC/2 A/cos φ > 0.75; 126.5 V AC/4 A/cos φ > 0.75; 30 V DC/2 A resistive load
Electromagnetic compatibility NE 21:2017 , EN 61326-3-1:2017 , EN IEC 61326-3-2:2018
Ambient temperature -40 ... 70 °C (-40 ... 158 °F)
Input EN 60947-5-6:2000
Pulse/Pause ratio min. 20 ms / min. 20 ms
Safety Integrity Level (SIL) SIL 2
Switching frequency ≤ 10 Hz
Directive 2014/35/EU EN 61010-1:2010+A1:2019+A1:2019/AC:2019
Rated voltage U 19 ... 30 V DC
Connection side control side
Output/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Configuration via DIP switches
Minimum switch current 2 mA / 24 V DC
Mechanical life 10 switching cycles
Rated values acc. to EN 60947-5-6 (NAMUR)
Output II signal ; relay