安全传感器-视觉传感器/安全传感器-安全传感器品牌厂家-买道传感网官网

商品名称： P+F 倍加福 KFD2-WAC2-Ex1.D 本质安全型隔离栅 K-System (DIN rail mounting)

商品型号： KFD2-WAC2-Ex1.D

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

UL approval	E223772
Current range	-20 ... 20 mA
Ripple	within the supply tolerance
Open circuit voltage/short-circuit current	18 V / 5 mA
Output III	terminals 7-, 8+, 9- non-intrinsically safe
Contact loading	253 V AC/2 A/500 VA/cos φ min. 0.7; 40 V DC/2 A resistive load
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012
IECEx certificate	IECEx TUN 06.0005
Temperature effect	≤ ± 0.01 %/K
Line fault detection	downscale -21.5 mA (-10.75 V) or 2 mA (1 V), upscale 21.5 mA (10.75 V)
Current I	238 mA
Sensor supply	1 ... 5 V
Output I, II against eachother	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Control elements	Control panel
Labeling	space for labeling at the front
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Maximum safe voltage_1	U 253 V AC / 40 V DC (Attention! U is no rated voltage.)
Short-circuit current	50 mA
Resolution/accuracy	≤ ± 0.05 % incl. non-linearity and hysteresis
Other circuits from each other	functional insulation, rated insulation voltage 50 V
Rated voltage	U 20 ... 35 V DC
Degree of protection	IP20
Dimensions	40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Input resistance	> 1 MΩ for voltage measurement
Maximum safe voltage U_1	U 40 V DC (Attention! U is no rated voltage.)
Reaction time	300 ... 850 ms
Input II and III	terminals 13+, 14-; 15+, 14- non-intrinsically safe
Electromagnetic compatibility	NE 21:2006
Mass	approx. 250 g
Control drawing	116-0302 (cFMus)
Width	40 mm
Maximum safe voltage	U 40 V DC (Attention! U is no rated voltage.)
Power P	833 mW (linear characteristic)
Maximum safe voltage_2	U 40 V DC (Attention! U is no rated voltage.)
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Height	119 mm
Depth	115 mm
Directive 2014/35/EU	EN 61010-1:2010
Collective error message	Power Rail
Analog current output	0 ... ± 20 mA or 4 ... 20 mA; load 0 ... 550 Ω (terminals 7 and 8)
Input I/other circuits	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Output III/Programming socket	not available
Signal type	Analog input
Connection side	control side
Programming interface	programming socket
Analog voltage output	0 ... ± 10 V; output resistance 500 Ω (bridge between terminal 7 and 9)
Output I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Interface	RS 485 programming jack
Type	RS-485
Connection_1	terminals 1+, 2-
Connection_2	terminals 3+, 4- (supply); 5+, 6- (signal)
Programmable Tare	0 ... 500 % of span
Output III/Input II, III	not available
Connection	screw terminals
Display elements	LEDs , display
EU-type examination certificate	TÜV 04 ATEX 2531
Active/Passive	I > 4 mA/I < 1.5 mA
Output I, II	terminals 10, 11, 12; 16, 17, 18 non-intrinsically safe
Voltage U	14 V
Input signal	-100 ... 100 mV
Input II, III	tare adjustment, calibration and zero
Configuration	via operating buttons via PACTware
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Load	max. 550 Ω
Lead resistance	max. 25 Ω per line
Mechanical life	2 x 10 switching cycles
Power consumption	max. 3 W
Maximum safe voltage U	40 V DC (Attention! U is no rated voltage.)
Supply	Power Rail or terminals 23+, 24- non-intrinsically safe
Input I	terminals 1+, 2- Ex ia IIC, Ex iaD

商品名称： P+F 倍加福 KCD2-ST-Ex2 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： KCD2-ST-Ex2

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

EU-type examination certificate	BASEEFA 13 ATEX 0080
Switching frequency	≤ 5 kHz
Ripple	≤ 10 %
Rated values	acc. to EN 60947-5-6 (NAMUR)
Output II	signal ; Transistor
Rated current	I 50 mA
Degree of protection	IP20
Signal type	Digital Input
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Maximum safe voltage_1	U 253 V AC (Attention! The rated voltage can be lower.)
Safety Integrity Level (SIL)	SIL 2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Display elements	LEDs
Pulse/Pause ratio	min. 100 µs / min. 100 µs
Output I	signal ; Transistor
Power dissipation	≤ 800 mW including maximum power dissipation in the output
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
Input	Ex ia
Width	12.5 mm
Response time	≤ 200 µs
Connection	screw terminals
Maximum safe voltage	U 253 V AC (Attention! U is no rated voltage.)
Certificate	CML 19 ATEX 4410 X
Line fault detection	breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Protection against electrical shock	IEC 61010-1:2010
Voltage	U 10.5 V
Control drawing	116-0374 (cULus)
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Labeling	space for labeling at the front
Current	I 17.1 mA
IECEx certificate	IECEx BAS 13.0046 IECEx CML 19.0147X
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions
Output/Output	not available , common pole terminal 9+
Marking_1	II 3G Ex ec IIC T4 Gc
Control elements	DIP switch
Height	119 mm
Depth	114 mm
Systematic capability (SC)	SC 3
Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Mass	approx. 100 g
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Signal level	1-signal: (supply voltage) - 3 V max. for 50 mA 0-signal: blocked output (off-state current ≤ 10 µA)
Output/power supply	not available , common pole terminal 9+
Connection side	control side
Rated voltage	U 30 V DC
Dimensions	12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012
Electromagnetic compatibility	NE 21:2011
Open circuit voltage/short-circuit current	approx. 10 V DC / approx. 8 mA
Collective error message	Power Rail
Configuration	via DIP switches
Power	P 45 mW (linear characteristic)
Switching point/switching hysteresis	1.2 ... 2.1 mA / approx. 0.2 mA

商品名称： P+F 倍加福 KCD2-SR-Ex2.SP SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： KCD2-SR-Ex2.SP

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Rated current	I ≤ 46 mA
Signal type	Digital Input
Power dissipation	≤ 900 mW
Labeling	space for labeling at the front
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Ripple	≤ 10 %
Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
UL approval	E106378
Output II	signal ; relay
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Display elements	LEDs
Open circuit voltage/short-circuit current	approx. 8 V DC / approx. 8 mA
Power	P 34 mW (linear characteristic)
Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019
Safety note	If load voltage > 50 V, de-energize before removing the terminals.
Contact loading	Zone 2 : 50 V AC/2 A/cos φ > 0.75; 30 V DC/2 A resistive load
Directive 2014/35/EU	EN 61010-1:2010+A1:2019+A1:2019/AC:2019
Electromagnetic compatibility	NE 21:2017 , EN 61326-3-1:2017 , EN IEC 61326-3-2:2018
Configuration	via DIP switches
Maximum safe voltage_2	U 40 V DC (Attention! U is no rated voltage.)
Rated values	acc. to EN 60947-5-6 (NAMUR)
Functional safety	IEC/EN 61508:2010
Degree of protection	IP20
Mass	approx. 100 g
Dimensions	12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Marking	II 3(1)G Ex ec nC [ia Ga] IIC T4 Gc , [exsign] II (1)D [Ex ia Da] IIIC , [exsign] I (M1) [Ex ia Ma] I
Power consumption	≤ 900 mW
Ambient temperature	-40 ... 70 °C (-40 ... 158 °F)
EU-type examination certificate	BASEEFA 06 ATEX 0092 X
Voltage	U 10.5 V
Connection side	control side
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Output/Output	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
IECEx certificate	IECEx BAS 06.0025 X
Maximum safe voltage_1	U 253 V AC (Attention! The rated voltage can be lower.)
Output I	signal ; relay
Output/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Rated voltage	U 19 ... 30 V DC
Energized/De-energized delay	≤ 20 ms / ≤ 20 ms
Current	I 13 mA
Maximum safe voltage	U 253 V AC (Attention! U is no rated voltage.)
Control elements	DIP switch
Safety Integrity Level (SIL)	SIL 2
Control drawing	116-0477 (cULus)
Connection	spring terminals
Mechanical life	10 switching cycles
Systematic capability (SC)	SC 3
Pulse/Pause ratio	min. 20 ms / min. 20 ms
Minimum switch current	2 mA / 24 V DC
Switching frequency	≤ 10 Hz
IECEx marking	Ex ec nC [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
Line fault detection	breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Input	Ex ia
Switching point/switching hysteresis	1.2 ... 2.1 mA / approx. 0.2 mA

商品名称： SCHMERSAL 施迈赛 BNS 33-12Z-2187 安全开关与监控装置

商品型号： BNS 33-12Z-2187

品牌名： SCHMERSAL 施迈赛

分类：安全传感器

订货号： 101128195

类型：安全开关

工作环境温度	-25 ... +70 °C
任务时间	20 年
毛重	65 g
传感器宽度	88 mm
传感器长度	13 mm
证书	cULus
外壳材料	玻璃纤维，加强型热塑塑料
开关元件	1个NO 触点， 2个NC 触点
工作原理	磁驱动
开关容量，最大	3 W
储存和运输温度	-25 ... +70 °C
耐冲击	30 g / 11 ms
线缆长度	1 m
连接器	电缆
抗振动	10 ... 55 Hz，振幅 1 mm
线缆截面	23 AWG
传感器高度	25 mm
执行元件	磁铁
防护等级	IP67

商品名称： SHG01.92/90 SCHMERSAL 施迈赛安全传感器

商品型号： SHG01.92/90

品牌名： SCHMERSAL 施迈赛

分类：安全传感器

订货号： 101020900

类型：安全开关

商品名称： AZM 161-B1ES SCHMERSAL 施迈赛安全传感器

商品型号： AZM 161-B1ES

品牌名： SCHMERSAL 施迈赛

分类：安全传感器

订货号： 101171859

类型：操作钥匙

商品名称： Sick 西克 RE15-SAC 安全开关

商品型号： RE15-SAC

品牌名： Sick 西克

分类：安全传感器

订货号： 1105317

类型：安全开关

开关电压	≤ 30 V DC
B10d 值	开关操作 2 x 107 (较小负荷时)
输出方式	舌簧接点
尺寸(宽 x 高 x 深)	26 mm x 36 mm x 13 mm
外壳防护等级	IP67 (IEC 60529)
开关电流	≤ 100 mA
安全接通距离 Sao	7 mm
系统硬件	带激励元件的传感器
激活方向	5
安全传感器级联	无，仅单独接线（含诊断）
连接类型	接头，M8，4 针
设计构造	方形
常闭触点	1
激励元件的编码级次	低编码级次 (EN ISO 14119)
传感器原理	磁式
重量	+ 0.1 kg
联管螺母材料	镀镍黄铜
激活的传感器表面	1
在错误情况下更安全	开关没有内部检测，发生故障时无法呈现一个安全状态。故障检测由已连接的安全相关逻辑单元执行。
工作环境温度	–30 °C ... +60 °C
抗振动	10 Hz ... 55 Hz, 1 mm (EN 60947-5-3)
安全切断距离 Sar	20 mm
常开触点	1
抗冲击能力	30 g, 11 ms (EN 60947-5-3)
结构型式	结构型式 4 (EN ISO 14119)
外壳材料	VISTAL®
储存温度范围	–30 °C ... +60 °C
报告触点	0

商品名称： KFD0-CS-EX2.52 P+F 倍加福安全传感器

商品型号： KFD0-CS-EX2.52

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

商品名称： P+F 倍加福 KFD0-TT-Ex1 本质安全型隔离栅 K-System (DIN rail mounting)

商品型号： KFD0-TT-Ex1

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：安全栅

Rated voltage	U 12 ... 35 V DC loop powered
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Signal type	Analog input
Measuring range	f span 4 ... 100 mV, zero point -12 ... 60 mV , both adjustable
Characteristic curve	the output voltage is linearly proportionate to the input voltage (not to temperature)
Certificate	TÜV 01 ATEX 1777 X
Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
Galvanic isolation	EN 50178
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Insulation coordination	EN 50178
Labeling	space for labeling at the front
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
After calibration	0.1 % of full-scale value ± 1 K for the cold junction
Connection	screw terminals
Power dissipation	0.4 W
Degree of protection	IP20
Mass	approx. 150 g
Control drawing	116-0132
Load	(U -12 V) / 0.02 A
EU-type examination certificate	ZELM 00 ATEX 0035
Configuration	via DIP switches via rotary switch
Depth	115 mm
Voltage	U 16.1 V
Power	P 3.2 mW
Control elements	DIP switch rotary switch
Temperature effect	temperature deviation 0.015 % of the span/K or 1.5 µV/K cold junction ± 2 K (calibrated at T = 20 °C (68 °F))
Influence of supply voltage	6.5 ppm/V
Rise time	250 ms
Maximum safe voltage	U 60 V (Attention! The rated voltage can be lower.)
Marking	II (1)GD [EEx ia] IIC
Current output	4 ... 20 mA , limited to ≤ 35 mA
Width	20 mm
Current	I 0.8 mA
Marking_1	II 3G Ex nA II T4
Fault signal	downscaling ≤ 3 mA , upscaling ≥ 22 mA
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Dimensions	20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2
Connection side	control side
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Height	119 mm
Lead resistance	max. 100 Ω per line

商品名称： P+F 倍加福 KFD0-CS-Ex1.50P SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： KFD0-CS-EX1.50P

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Control drawing	116-0437
UL approval	E106378
Short-circuit current	at U > 24.3 V : ≤ 65 mA
Power dissipation	at 20 mA and U < 24.3 V: < 250 mW per channel at 20 mA and U > 24.3 V: < 500 mW per channel
Certificate	FIDI 22 ATEX 0001 X
Width	20 mm
Transfer current	≤ 40 mA
Mass	approx. 100 g
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Rated voltage	U 5 ... 35 V DC , loop powered
Voltage	U 25.2 V
Control drawing_1	116-0438 (cULus)
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
Height	107 mm
Signal type	Analog input/analog output
Connection	screw terminals
Maximum safe voltage	U 250 V (Attention! The rated voltage can be lower.)
Power	P 585 mW
Systematic capability (SC)	SC 3
Degree of protection	IP20
Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-11:2012 , EN IEC 60079-7:2015+A1:2018
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Depth	115 mm
Protection against electrical shock	UL 61010-1:2012
Dimensions	20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) (W x H x D) , housing type B1
Maximum safe voltage_1	U 250 V (Attention! The rated voltage can be lower.)
Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Electromagnetic compatibility	NE 21:2012 EN 61326-3-2:2008
IECEx certificate	IECEx BAS 05.0004X IECEx CML 19.0040X
Rise time	≤ 5 ms at bounce from 4 ... 20 mA and U < 24 V
Safety Integrity Level (SIL)	SIL 2
Ambient temperature	-20 ... 70 °C (-4 ... 158 °F)
EU-type examination certificate	BAS 98 ATEX 7343 X
Labeling	space for labeling at the front
After calibration	≤ ± 20 µA; incl. calibration, linearity, hysteresis and load fluctuations at the field side up to a load of 1 kΩ at 20 °C (68 °F)
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Current	I 93 mA
Marking_1	II 3G Ex ec IIC T4 Gc
Accuracy	0.1 %
Influence of ambient temperature	≤ ± 2 µA/K at U ≤ 20 V; ≤ ± 5 µA/K at U > 20 V