买道传感网

分类

安全传感器-视觉传感器/安全传感器-安全传感器品牌厂家-买道传感网官网

P+F 倍加福 KCD2-SOT-1.LB 信号调节器 K-System (DIN rail, highly functional)

商品名称: P+F 倍加福 KCD2-SOT-1.LB 信号调节器 K-System (DIN rail, highly functional)

商品型号: KCD2-SOT-1.LB

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Output/power supply basic insulation according to EN 50178, rated insulation voltage 50 V
Ambient temperature -20 ... 60 °C (-4 ... 140 °F) extended ambient temperature range up to 70 °C (158 °F) , refer to manual and derating characteristics for necessary mounting conditions
Collective error message Power Rail
Rated voltage U 30 V DC
Configuration via DIP switches
Switching frequency ≤ 5 kHz
Signal type Digital Input
Systematic capability (SC) SC 3
Input/Output reinforced insulation acc. to EN 50178, rated insulation voltage 300 V
Degree of protection IP20
Rated values acc. to EN 60947-5-6 (NAMUR)
Output II signal or fault message ; Transistor
Ripple ≤ 10 %
Output/Output basic insulation according to EN 50178, rated insulation voltage 50 V
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Connection screw terminals
Display elements LEDs
Labeling space for labeling at the front
Electromagnetic compatibility NE 21:2011
Rated current I 50 mA
Signal level 1-signal: (external voltage) - 3 V max. for 50 mA 0-signal: blocked output (off-state current ≤ 10 µA)
Output I signal ; Transistor
Power dissipation ≤ 700 mW including maximum power dissipation in the output
Connection side control side
Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Pulse/Pause ratio min. 100 µs / min. 100 µs
Open circuit voltage/short-circuit current approx. 10 V DC / approx. 8 mA
Input EN 60947-5-6:2000
Input/power supply reinforced insulation acc. to EN 50178, rated insulation voltage 300 V
Mass approx. 100 g
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Line fault detection breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Safety Integrity Level (SIL) SIL 2
Protection against electrical shock IEC 61010-1:2010
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
Response time ≤ 200 µs
P+F 倍加福 Z728.H 齐纳防爆栅 模块

商品名称: P+F 倍加福 Z728.H 齐纳防爆栅 模块

商品型号: Z728.H

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 安全栅

Supply loop max. 26.9 V
Storage temperature -25 ... 70 °C (-13 ... 158 °F)
Height 115 mm
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Current I 120 mA
Core cross section max. 2 x 2.5 ... mm
Mass approx. 150 g
Construction type modular terminal housing , see system description
Nominal resistance 240 Ω
Relative humidity max. 75 % , without condensation
Series resistance min. 235 Ω
Dimensions 12.5 x 115 x 116 mm (0.5 x 4.5 x 4.6 inch) (W x H x D)
Voltage U 28 V
Certificate TÜV 99 ATEX 1484 X
Fuse rating 80 mA
Degree of protection IP20
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Control drawing_1 116-0139 (cULus)
IECEx certificate IECEx BAS 09.0142 IECEx BAS 17.0091X
Depth 116 mm
Power P 830 mW
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
Type DC version, positive polarity
EU-type examination certificate BAS 01 ATEX 7005
Maximum safe voltage U 250 V
Marking_1 II 3G Ex nA IIC T4 Gc
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Connection screw terminals
Measurement loop max. 26.5 V at 10 µA
Width 12.5 mm
Marking II (1)GD, I (M1) [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Control drawing 116-0118
P+F 倍加福 HiC2831R1 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品名称: P+F 倍加福 HiC2831R1 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号: HiC2831R1

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Mass approx. 90 g
Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Voltage U 10.5 V
Switching frequency ≤ 5 kHz
Current I 17.1 mA
Maximum safe voltage U 253 V AC (Attention! U is no rated voltage.)
Marking_1 II 3G Ex ec IIC T4 Gc
Control drawing_1 116-0331
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I , Ex ec IIC T4 Gc
Height 106 mm
EU-type examination certificate BVS 11 ATEX E 026
Power dissipation ≤ 500 mW
Connection side control side
Certificate KIWA 15 ATEX 0037 X
IECEx certificate IECEx BVS 11.0040 IECEx KIWA 15.0019X
Input Ex ia
Depth 128 mm
Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
Protection against electrical shock IEC 61010-1
Coding pin 1 and 2 trimmed For further information see system description.
Dimensions 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018 , EN 50303:2000
Connection SL1: 6b
Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Output/Output basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V
Pulse/Pause ratio min. 100 µs / min. 100 µs
Safety Integrity Level (SIL) SIL 2
Labeling space for labeling at the front
Electromagnetic compatibility EN IEC 61326-3-2:2018 , NE 21:2017 For further information see system description.
UL approval E106378
Ripple ≤ 10 %
Mounting on termination board
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Output I, II signal or fault message, passive transistor output (resistive) 0-signal: 33 kΩ ± 5 % + voltage drop 6.5 V ± 0.5 V 1-signal: voltage drop 6.5 V ± 0.5 V fault: > 100 kΩ
Width 12.5 mm
Maximum safe voltage_1 U 253 V AC (Attention! U is no rated voltage.)
Power P 45 mW (linear characteristic)
Input/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Open circuit voltage/short-circuit current approx. 10 V DC / approx. 8 mA
Configuration via DIP switches
Ambient temperature -40 ... 70 °C (-40 ... 158 °F)
Line fault detection breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Control elements DIP switch
Response time ≤ 200 µs
Power consumption ≤ 600 mW
Rated voltage U 19 ... 30 V DC with external resistance > 2 kΩ, e. g. 16-channel ProSafe DI card SDV144 from Yokogawa
Signal type Digital Input
Display elements LEDs
Systematic capability (SC) SC 3
Output type open collector transistor (internal fault bus)
Rated current I ≤ 25 mA
Degree of protection IP20
Rated values acc. to EN 60947-5-6 (NAMUR), see manual for electrical data
Control drawing 116-0430 (cFMus)
Output/power supply basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 V
HiC2025ES P+F 倍加福 安全传感器

商品名称: HiC2025ES P+F 倍加福 安全传感器

商品型号: HiC2025ES

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

EUCHNER 安士能CES-I-AP-U-C04-USI-115150无门锁功能的应答机编码安全开关

商品名称: EUCHNER 安士能CES-I-AP-U-C04-USI-115150无门锁功能的应答机编码安全开关

商品型号: CES-I-AP-U-C04-USI-115150

品牌名: EUCHNER 安士能

分类: 安全传感器

订货号: 115150

类型: 安全开关

保护等级 IP67
额定冲击电压 0.5 kV
壳体 塑料,PBT
额定绝缘电压U 30 V
输出类型 半导体输出,p开关,防短路功能
安装方向 任何
监控安全门位置 PL e
开关频率 max. 1 Hz
测试脉冲持续时间 max. 0.3 ms
安装类型 金属非齐平
安全等级 III
测试脉冲间隔 min. 100 ms
连接类型 PUR电缆,100 mm,配有5针M12x1圆形接插头,其中针5未使用
就绪状态延时 0.5 s
PSEN sc L 5.5 08-12(6D000013)

商品名称: PSEN sc L 5.5 08-12(6D000013)

商品型号: PSEN sc L 5.5 08-12(6D000013)

品牌名: Pilz 皮尔磁

分类: 安全传感器

订货号: 6D000013

类型: 安全激光扫描仪

F3SG-4PGA1070-4A

商品名称: F3SG-4PGA1070-4A

商品型号: F3SG-4PGA1070-4A

品牌名: Omron 欧姆龙

分类: 安全传感器

订货号: F3G20079H

类型: 安全光幕

P+F 倍加福 KFD2-WAC2-Ex1.D 本质安全型隔离栅 K-System (DIN rail mounting)

商品名称: P+F 倍加福 KFD2-WAC2-Ex1.D 本质安全型隔离栅 K-System (DIN rail mounting)

商品型号: KFD2-WAC2-Ex1.D

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

UL approval E223772
Current range -20 ... 20 mA
Ripple within the supply tolerance
Open circuit voltage/short-circuit current 18 V / 5 mA
Output III terminals 7-, 8+, 9- non-intrinsically safe
Contact loading 253 V AC/2 A/500 VA/cos φ min. 0.7; 40 V DC/2 A resistive load
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012
IECEx certificate IECEx TUN 06.0005
Temperature effect ≤ ± 0.01 %/K
Line fault detection downscale -21.5 mA (-10.75 V) or 2 mA (1 V), upscale 21.5 mA (10.75 V)
Current I 238 mA
Sensor supply 1 ... 5 V
Output I, II against eachother reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Control elements Control panel
Labeling space for labeling at the front
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Maximum safe voltage_1 U 253 V AC / 40 V DC (Attention! U is no rated voltage.)
Short-circuit current 50 mA
Resolution/accuracy ≤ ± 0.05 % incl. non-linearity and hysteresis
Other circuits from each other functional insulation, rated insulation voltage 50 V
Rated voltage U 20 ... 35 V DC
Degree of protection IP20
Dimensions 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Input resistance > 1 MΩ for voltage measurement
Maximum safe voltage U_1 U 40 V DC (Attention! U is no rated voltage.)
Reaction time 300 ... 850 ms
Input II and III terminals 13+, 14-; 15+, 14- non-intrinsically safe
Electromagnetic compatibility NE 21:2006
Mass approx. 250 g
Control drawing 116-0302 (cFMus)
Width 40 mm
Maximum safe voltage U 40 V DC (Attention! U is no rated voltage.)
Power P 833 mW (linear characteristic)
Maximum safe voltage_2 U 40 V DC (Attention! U is no rated voltage.)
Marking II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Height 119 mm
Depth 115 mm
Directive 2014/35/EU EN 61010-1:2010
Collective error message Power Rail
Analog current output 0 ... ± 20 mA or 4 ... 20 mA; load 0 ... 550 Ω (terminals 7 and 8)
Input I/other circuits safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Output III/Programming socket not available
Signal type Analog input
Connection side control side
Programming interface programming socket
Analog voltage output 0 ... ± 10 V; output resistance 500 Ω (bridge between terminal 7 and 9)
Output I, II/other circuits reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Interface RS 485 programming jack
Type RS-485
Connection_1 terminals 1+, 2-
Connection_2 terminals 3+, 4- (supply); 5+, 6- (signal)
Programmable Tare 0 ... 500 % of span
Output III/Input II, III not available
Connection screw terminals
Display elements LEDs , display
EU-type examination certificate TÜV 04 ATEX 2531
Active/Passive I > 4 mA/I < 1.5 mA
Output I, II terminals 10, 11, 12; 16, 17, 18 non-intrinsically safe
Voltage U 14 V
Input signal -100 ... 100 mV
Input II, III tare adjustment, calibration and zero
Configuration via operating buttons via PACTware
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Load max. 550 Ω
Lead resistance max. 25 Ω per line
Mechanical life 2 x 10 switching cycles
Power consumption max. 3 W
Maximum safe voltage U 40 V DC (Attention! U is no rated voltage.)
Supply Power Rail or terminals 23+, 24- non-intrinsically safe
Input I terminals 1+, 2- Ex ia IIC, Ex iaD
P+F 倍加福 KCD2-SR-Ex2.SP SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品名称: P+F 倍加福 KCD2-SR-Ex2.SP SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号: KCD2-SR-Ex2.SP

品牌名: P+F 倍加福

分类: 安全传感器

订货号:

类型: 隔离栅

Rated current I ≤ 46 mA
Signal type Digital Input
Power dissipation ≤ 900 mW
Labeling space for labeling at the front
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Ripple ≤ 10 %
Input/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
UL approval E106378
Output II signal ; relay
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Display elements LEDs
Open circuit voltage/short-circuit current approx. 8 V DC / approx. 8 mA
Power P 34 mW (linear characteristic)
Directive 2014/34/EU EN IEC 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019
Safety note If load voltage > 50 V, de-energize before removing the terminals.
Contact loading Zone 2 : 50 V AC/2 A/cos φ > 0.75; 30 V DC/2 A resistive load
Directive 2014/35/EU EN 61010-1:2010+A1:2019+A1:2019/AC:2019
Electromagnetic compatibility NE 21:2017 , EN 61326-3-1:2017 , EN IEC 61326-3-2:2018
Configuration via DIP switches
Maximum safe voltage_2 U 40 V DC (Attention! U is no rated voltage.)
Rated values acc. to EN 60947-5-6 (NAMUR)
Functional safety IEC/EN 61508:2010
Degree of protection IP20
Mass approx. 100 g
Dimensions 12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Marking II 3(1)G Ex ec nC [ia Ga] IIC T4 Gc , [exsign] II (1)D [Ex ia Da] IIIC , [exsign] I (M1) [Ex ia Ma] I
Power consumption ≤ 900 mW
Ambient temperature -40 ... 70 °C (-40 ... 158 °F)
EU-type examination certificate BASEEFA 06 ATEX 0092 X
Voltage U 10.5 V
Connection side control side
Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Output/Output reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
IECEx certificate IECEx BAS 06.0025 X
Maximum safe voltage_1 U 253 V AC (Attention! The rated voltage can be lower.)
Output I signal ; relay
Output/power supply reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Rated voltage U 19 ... 30 V DC
Energized/De-energized delay ≤ 20 ms / ≤ 20 ms
Current I 13 mA
Maximum safe voltage U 253 V AC (Attention! U is no rated voltage.)
Control elements DIP switch
Safety Integrity Level (SIL) SIL 2
Control drawing 116-0477 (cULus)
Connection spring terminals
Mechanical life 10 switching cycles
Systematic capability (SC) SC 3
Pulse/Pause ratio min. 20 ms / min. 20 ms
Minimum switch current 2 mA / 24 V DC
Switching frequency ≤ 10 Hz
IECEx marking Ex ec nC [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
Line fault detection breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Input Ex ia
Switching point/switching hysteresis 1.2 ... 2.1 mA / approx. 0.2 mA
SHG01.92/90 SCHMERSAL 施迈赛 安全传感器

商品名称: SHG01.92/90 SCHMERSAL 施迈赛 安全传感器

商品型号: SHG01.92/90

品牌名: SCHMERSAL 施迈赛

分类: 安全传感器

订货号: 101020900

类型: 安全开关