执行器-中低压配电-执行器品牌厂家-买道传感网官网

商品名称： BETAETIGER-P-GNT EUCHNER 安士能其他

商品型号： BETAETIGER-P-GNT

品牌名： EUCHNER 安士能

分类：执行器

订货号： 074576

类型：执行器

商品名称： P+F 倍加福 KCD2-SLD-Ex1.1045 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号： KCD2-SLD-Ex1.1045

品牌名： P+F 倍加福

分类：执行器

订货号：

类型：驱动器

Mass	approx. 150 g
Electromagnetic compatibility	NE 21:2012 , EN 61326-3-2:2008 For further information see system description.
Systematic capability (SC)	SC 3
Output II/power supply	basic insulation according to IEC/EN 61010-1, rated insulation voltage 32 V
Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-11:2012 , EN 60079-15:2010
Mechanical life	10 switching cycles
Internal resistor	R 285 Ω
Output/other circuits	basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Connection_1	terminals 7, 8 , non-intrinsically safe
Safety Integrity Level (SIL)	SIL 3
Current	I 93 mA
Configuration	via DIP switches
Output I	Ex ia
Degree of protection	IP20
Signal type	Digital Output
Power dissipation	1.4 W at 24 V, 220 Ω load
Connection side	field side
Connection	screw terminals
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Maximum safe voltage_1	U 60 V (Attention! The rated voltage can be lower.)
Test current	max. 350 µA , calculated by I = 4.7 V / (15 kΩ + R )
Rated voltage	U 19 ... 30 V DC loop powered
IECEx marking	Ex nC ec [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
Signal level	loop powered 1-signal: 19 ... 30 V DC 0-signal: 0 ... 5 V DC bus powered 1-signal: 15 ... 30 V DC (current limited to 5 mA) 0-signal: 0 ... 5 V DC
Power	P 605 mW
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Control drawing	116-0448 (cULus)
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
IECEx certificate	IECEx EXA 17.0001X
Maximum safe voltage_2	U 60 V (Attention! The rated voltage can be lower.)
Input current	75 mA at 24 V, 220 Ω load
Labeling	space for labeling at the front
Maximum safe voltage	U 60 V (Attention! The rated voltage can be lower.)
Open loop voltage	U typ. 24.6 V
Load	nominal 0.05 ... 18 kΩ , valid range for line fault detection (LFD)
Output II	fault signal
Current limit	I 45 mA
Output I/other circuits	safe electrical isolation acc. to IEC/EN 60079-11, rated insulation voltage 300 V
Rated current	I 0-signal: typ. 1.6 mA at 1.5 V DC; typ. 8 mA at 3 V DC (maximum leakage current DO card) 1-signal: ≥ 36 mA (minimum load current DO card)
Contact loading	30 V DC/ 0.5 A resistive load
Display elements	LEDs
Protection against electrical shock	EN 61010-1:2010
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F) Observe the temperature range limited by derating, see section derating.
Dimensions	12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Control elements	DIP switch
EU-type examination certificate	EXA 17 ATEX 0002 X
Marking	II 3(1)G Ex nC ec [ia Ga] IIC T4 Gc [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Voltage	U 26 V
Energized/De-energized delay	≤ 20 ms / ≤ 20 ms
UL approval	E106378
Test pulse length	max. 2 ms from DO card
Inrush current	< 200 mA , 10 ms loop powered