安全传感器-视觉传感器/安全传感器-安全传感器品牌厂家-买道传感网官网

商品名称： P+F 倍加福 P-LB-1.A.13 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号： P-LB-1.A.13

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：安全栅

Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Marking_1	II 3G Ex nA IIC T4 Gc
Asymmetric	100 ns
IECEx certificate	IECEx BAS 12.0123
Rated voltage	U max. 30 V
IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Series resistor	≤ 0.5 Ω per wire
Rated current	I max. 250 mA
Ground insulation	max. 500 V breakdown voltage
Degree of protection	IP20
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Dimensions	20 x 104 x 127 mm (0.8 x 4.1 x 5 inch) (W x H x D)
Current	I 250 mA
On-state voltage	max. 45 V
Mounting	on the KF module
Bandwidth	≥ 40 kHz
Marking	II (1)G [Ex ia Ga] IIC
Internal capacitance	C negligible
Internal inductance	L 200 µH
Safety Integrity Level (SIL)	SIL 3
Voltage	U 30 V
Connection	terminals 1, 3
Leakage current	max. 5 µA
EU-type examination certificate	PTB 02 ATEX 2044
Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
Number of protected signal lines	2
Mass	approx. 70 g
Symmetrical	1 ns
Labeling	space for labeling at the front
Certificate	PF 16 CERT 3908 X
Maximum leakage current	10 kA (8/20 µs) per conductor

商品名称： P+F 倍加福 S1SD-1TI-1U 信号调节器 SC-System (DIN rail, compact design)

商品型号： S1SD-1TI-1U

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Rated voltage	U 16.8 ... 31.2 V DC
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Mass	approx. 70 g
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accuracy	max. 0.1 % of full-scale value
Certificate	DEMKO 16 ATEX 1750X
Measurement loop monitoring	sensor breakage, lead breakage, short circuit
Power dissipation	0.7 W
Operation time	MTBF: 353 a acc. to SN 29500 stationary continuous operating, average ambient temperature 40 °C (104 °F)
Lead resistance	≤ 100 Ω per line
Fault signal	downscale or upscale
Measuring time	≤ 300 ms
Ripple	≤ 10 mV
Power consumption	0.8 W
Connection side	control side
RTD	< 0.1 K/0.05 % of the measured value
Voltage	< 0.1 % of the measured value
Signal type	Analog input
Input resistance	≥ 1 MΩ
Influence of ambient temperature	< 100 ppm/K of full-scale value
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Marking	II 3G Ex nA IIC T4 Gc
Programming interface	programming socket
IECEx certificate	IECEx UL 16.0116X
Measuring current_1	approx. 200 µA
Measurement loop monitoring_1	sensor breakage, lead breakage, short circuit
Height	97 mm
Core cross section	0.5 ... 2.5 mm (20 ... 14 AWG)
Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-15:2010
UL approval	E106378
PTC	type KT, KTY, ST
Types of measuring	2-, 3-, 4-wire connection
Connection	screw terminals
Protection against electrical shock	EN 61010-1:2010
Dimensions	6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) (W x H x D) , housing type S1
Width	6.2 mm
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Measuring current	approx. 200 µA
Measurement loop monitoring_2	sensor breakage, lead breakage
Types of measuring_2	3-wire connection
Analog voltage output	0/1 ... 5 V , 0/2 ... 10 V , load ≥ 2 kΩ
Types of measuring_1	2-, 3-, 4-wire connection
Cold junction compensation	external (Pt100) and internal , manually
Potentiometer	< 0.02 % of the measured value
Input/Other circuits	safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V test voltage 3 kV, 50 Hz, 1 min
Output/power supply	safe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V test voltage 3 kV, 50 Hz, 1 min
Analog current output	0/2 ... 10 mA, 0/4 ... 20 mA, load ≤ 600 Ω
Damaging gas	designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
IECEx marking	Ex nA IIC T4 Gc
Configuration	via DIP switches via keys via software
Labeling	space for labeling at the front
Degree of protection	IP20
Depth	107 mm
Lead resistance_1	max. 100 Ω per line
Thermocouples	< 0.3 K/0.1 % of the measured value
Lead resistance_2	max. 10 kΩ
Measuring range	0 ... 5 kΩ

商品名称： P+F 倍加福 HiD2038 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： HID2038

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Mounting	on termination board
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
IECEx certificate	IECEx ULD 20.0012X
Line fault detection	breakage, load > 100 kΩ, short-circuit, load < 50 Ω
Width	18 mm
Power consumption	≤ 1 W
Rated voltage	U 19 ... 30 V DC bus powered via Termination Board
Dimensions	18 x 114 x 130 mm (0.7 x 4.5 x 5.1 inch) (W x H x D)
Connection side	field side
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Electromagnetic compatibility	NE 21:2017 EN 61326-3-2:2018 For further information see system description.
Output	Ex ia, Ex iaD
Current	I 93 mA
Depth	130 mm
Maximum safe voltage_1	U 250 V (Attention! The rated voltage can be lower.)
Input/input	functional insulation, rated insulation voltage 50 V AC
Degree of protection	IP20
Mass	approx. 140 g
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Power dissipation	≤ 1 W at 20 mA and 500 Ω load
Output type	open collector transistor (internal fault bus)
Coding	pin 1 and 3 trimmed For further information see system description.
EU-type examination certificate	DEMKO 20 ATEX 2378 X
Certificate	DEMKO 20 ATEX 2379 X
Marking_1	II 3G Ex ec IIC T4 Gc
Internal capacitance	C 1.05 nF
Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-11:2012 , EN 60079-7:2015+A1:2018
Input voltage	open loop voltage of the control system ≤ 30 V
Labeling	space for labeling at the front
Maximum safe voltage	U 250 V (Attention! The rated voltage can be lower.)
Influence of ambient temperature	< 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F))
Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Protection against electrical shock	UL 61010-1:2012
Deviation	at 20 °C (68 °F), 4 ... 20 mA < 0.1 % of full scale, incl. non-linearity and hysteresis
Frequency range	field side into the control side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB)
Ambient temperature	-40 ... 70 °C (-40 ... 158 °F)
Voltage	U 25.2 V
Connection	SL1: 6b
IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex ec IIC T4 Gc
Load	100 ... 650 Ω , for terminals 1a, 1b; 5a, 5b 0 ... 550 Ω , for terminals 1b, 3b; 5b, 7a
UL approval	E106378
Voltage drop	approx. 6 V at 20 mA
Input signal	4 ... 20 mA , limited to approx. 30 mA
Rated current	I ≤ 40 mA at 24 V
Rise time	10 to 90 % ≤ 10 ms
Power	P 585.3 mW
Input/power supply	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Internal inductance	L 0
Safety Integrity Level (SIL)	SIL 2
Control drawing	116-0475 (cULus)
Signal type	Analog output
Display elements	LEDs
Height	114 mm
Ripple	20 mV rms
Input resistance	field wiring open circuit : > 100 kΩ field wiring < 50 Ω : > 100 kΩ when using terminals 5a, 5b; 1a, 1b

商品名称： P+F 倍加福 HiD2872 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号： HiD2872

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Display elements	LEDs
Signal level	1-signal: 15...30 V DC (current limited to 3 mA) or contact close (internal 10 kΩ pull-up) 0-signal: 0...5 V DC or contact open
Open loop voltage	U approx. 22.5 V
EU-type examination certificate	CESI 10 ATEX 036
Energized/De-energized delay	- bus powered: filter OFF: 1 ms, filter ON: 10 ms - loop powered: switch-on 50 ms, switch-off 6 ms (300 Ω load)
Internal resistor	R approx. 240 Ω
Fault current	4 mA pulsing (20 ms ON, 200 ms OFF)
Mass	approx. 140 g
Dimensions	18 x 114 x 130 mm (0.7 x 4.5 x 5.1 inch) (W x H x D)
Voltage	U 26 V
Output	Ex ia Ga, Ex ia Da, Ex ia Ma
IECEx certificate	IECEx CES 10.0013
Depth	130 mm
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mounting	on termination board
Switching frequency	f - bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz - loop powered: max. 10 Hz
Certificate	PF 10 CERT 1729 X
Current limit	I 55 mA
Rated voltage	U 20.4 ... 30 V DC loop powered 20.4 ... 30 V DC bus powered via Termination Board
Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
Input current	62 mA at 24 V, 300 Ω load (per channel)
Current	I 110 mA
Output type	open collector transistor (internal fault bus)
Coding	pin 1 and 4 trimmed For further information see system description.
Safety Integrity Level (SIL)	SIL 3
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Control drawing	366-005CS-12B (cCSAus)
Labeling	space for labeling at the front
Height	114 mm
Connection side	field side
Connection	SL1: 6b
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Marking_1	II 3G Ex nA IIC T4 Gc
IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Power	P 715 mW
Output/Output	safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V
Electromagnetic compatibility	NE 21:2006 For further information see system description.
Configuration	via DIP switches
Width	18 mm
Control input	external switch (dry contact or open collector) non isolated or logic signal input fully floating
Relative humidity	5 ... 90 %, non-condensing up to 35 °C (95 °F)
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Signal type	Digital Output
Power dissipation	1 W at 24 V, 300 Ω load (per channel) for loop powered
Maximum safe voltage	U 253 V AC (Attention! U is no rated voltage.)
Control elements	DIP switch
Inrush current	0.2 A , 15 ms loop powered
Fault level	lead short-circuit detection at < 25 Ω lead breakage detection at > 100 kΩ typical
Output/power supply, inputs, and collective error	safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V
Degree of protection	IP20
Load	nominal 0.1 ... 5 kΩ

商品名称： P+F 倍加福 HiC2031HC SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： HiC2031HC

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：安全栅

Safety Integrity Level (SIL)	SIL 2
Input voltage	depending on switch configuration open loop voltage of the control system < 19 V open loop voltage of the control system < 26 V
Height	106 mm
Equipment	SL2: 5a(+), 5b(-)
Internal inductance	L negligible
Dimensions	12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
Influence of ambient temperature	< 2 µA/K (0 ... 60 °C (32 ... 140 °F)); < 4 µA/K (-20 ... 0 °C (-4 ... 32 °F))
Power consumption	≤ 700 mW
Frequency range	field side into the control side: bandwidth with 0.5 V signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 1 mA signal 0 ... 3 kHz (-3 dB)
Mass	approx. 100 g
Labeling	space for labeling at the front
Maximum safe voltage	U 253 V AC (Attention! U is no rated voltage.)
Voltage drop	depending on switch configuration open loop voltage of the control system < 19 V: approx. 5 V at 20 mA open loop voltage of the control system < 26 V: approx. 12 V at 20 mA
Power	P 500 mW
Factory setting	input: max. input voltage 19 V
Rated current	I ≤ 35 mA
Power dissipation	≤ 600 mW
Connection side	field side
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Maximum safe voltage_1	U 253 V AC (Attention! The rated voltage can be lower.)
Input signal	4 ... 20 mA , limited to approx. 27 mA
Ripple	20 mV rms
Rated voltage	U 19 ... 30 V DC bus powered via Termination Board
Configuration	via DIP switches
Depth	128 mm
Degree of protection	IP20
Control drawing	116-0393 (cULus)
Signal type	Analog output
Output	Ex ia
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
Width	12.5 mm
Internal capacitance	C 5.7 nF
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Current	I 100 mA
Certificate	CESI 19 ATEX 050 X
Input resistance	> 100 kΩ, with field wiring open
Mounting	on termination board
Marking	II (1)G [Ex ia Ga] IIC [exsign] II (1)D [Ex ia Da] IIIC [exsign] I (M1) [Ex ia Ma] I
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Electromagnetic compatibility	NE 21:2012 For further information see system description.
Marking_1	II 3G Ex ec IIC T4 Gc
Control elements	DIP switch
Rise time	10 to 90 % ≤ 100 ms
Coding	pin 2 and 4 trimmed For further information see system description.
Deviation	at 20 °C (68 °F), 4 ... 20 mA ≤ ± 0.1 % incl. non-linearity and hysteresis
EU-type examination certificate	CESI 11 ATEX 012
Voltage	U 20 V
Connection	SL2: 5a(+), 5b(-)
Display elements	LED
IECEx certificate	IECEx CES 11.0010X
Load	0 ... 625 Ω
UL approval	E106378
Systematic capability (SC)	SC 3
Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V

商品名称： P+F 倍加福 HiC2851 SIL-Capable Products for Hazardous Areas Safety Integrity Level 3

商品型号： HIC2851

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Degree of protection	IP20
Mounting	on termination board
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Height	106 mm
Depth	128 mm
Output II	≤ 50 Hz
Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Lead resistance	max. 50 Ω , consider capacitances and inductances
Switching point	1-signal: I > 2.8 mA 0-signal: I < 2.1 mA
Rated current	I ≤ 55 mA
IECEx certificate	IECEx BAS 07.0097X
Rated voltage	U output II: typ. 8 V DC, max. 22 V DC
Dimensions	12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
Labeling	space for labeling at the front
Line fault detection	breakage I ≤ 0.15 mA , short-circuit I ≥ 8.5 mA
Ripple	≤ 10 %
Output I	≤ 50 Hz
Voltage	U 10.5 V
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Current	I 17.1 mA
Marking	II (1)G [Ex ia] IIC , [exsign] II (1) D [Ex ia] IIIC , [exsign] I (M1) [Ex ia] I
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Systematic capability (SC)	SC 3
Connection side	control side
Maximum safe voltage_1	U 253 V AC (Attention! U is no rated voltage.)
UL approval	E106378
Coding	pin 1 and 2 trimmed For further information see system description.
Safety Integrity Level (SIL)	SIL 3
Control drawing	16-534FM-12 (cFMus)
Signal type	Digital Input
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Output/Output	functional insulation acc. to IEC 62103, rated insulation voltage 50 V
Certificate	PF 09 CERT 1440 X
Control drawing_1	116-0364
Input	Ex ia
Output/power supply	functional insulation acc. to IEC 62103, rated insulation voltage 50 V
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mass	approx. 105 g
Power dissipation	≤ 800 mW
Connection	SL1: 6b
Switching point/switching hysteresis	2.1 ... 2.8 mA / approx. 0.3 mA
Electromagnetic compatibility	EN IEC 61326-3-2:2018 , NE 21:2017 For further information see system description.
Maximum safe voltage	U 253 V AC (Attention! U is no rated voltage.)
Marking_1	II 3G Ex nA IIC T4 Gc
IECEx marking	[Ex ia Ga] IIC, [Ex ia] IIIC , [Ex ia] I
Open circuit voltage/short-circuit current	approx. 8.4 V DC / approx. 11.9 mA
Response delay	≤ 1 ms
Power	P 45 mW (linear characteristic)
Power consumption	≤ 1300 mW
EU-type examination certificate	BASEEFA 07 ATEX 0302X
Display elements	LEDs
Width	12.5 mm
Output type	open collector transistor (internal fault bus)

商品名称： P+F 倍加福 KCD2-SR-Ex1.LB.SP SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： KCD2-SR-Ex1.LB.SP

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：安全光栅

EU-type examination certificate	BASEEFA 06 ATEX 0092 X
Control drawing	116-0477 (cULus)
Switching frequency	≤ 10 Hz
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Directive 2014/35/EU	EN 61010-1:2010+A1:2019+A1:2019/AC:2019
Output I	signal ; relay
Rated voltage	U 19 ... 30 V DC
Rated current	I ≤ 37 mA
Ambient temperature	-40 ... 70 °C (-40 ... 158 °F)
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Display elements	LEDs
Mass	approx. 100 g
Voltage	U 10.5 V
Directive 2014/34/EU	EN IEC 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019
Labeling	space for labeling at the front
Input	Ex ia
Mechanical life	10 switching cycles
Current	I 13 mA
Maximum safe voltage	U 253 V AC (Attention! U is no rated voltage.)
UL approval	E106378
Systematic capability (SC)	SC 3
Pulse/Pause ratio	min. 20 ms / min. 20 ms
Signal type	Digital Input
Connection side	control side
Maximum safe voltage_1	U 253 V AC (Attention! The rated voltage can be lower.)
Switching point/switching hysteresis	1.2 ... 2.1 mA / approx. 0.2 mA
Output II	signal or fault message ; relay
Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Energized/De-energized delay	≤ 20 ms / ≤ 20 ms
Line fault detection	breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA
Open circuit voltage/short-circuit current	approx. 8 V DC / approx. 8 mA
Width	12.5 mm
Maximum safe voltage_2	U 40 V DC (Attention! U is no rated voltage.)
Rated values	acc. to EN 60947-5-6 (NAMUR)
Marking	II 3(1)G Ex ec nC [ia Ga] IIC T4 Gc , [exsign] II (1)D [Ex ia Da] IIIC , [exsign] I (M1) [Ex ia Ma] I
Power dissipation	≤ 750 mW
Power	P 34 mW (linear characteristic)
Safety note	If load voltage > 50 V, de-energize before removing the terminals.
Output/Output	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Configuration	via DIP switches
Depth	114 mm
Ripple	≤ 10 %
Power consumption	≤ 750 mW
Safety Integrity Level (SIL)	SIL 2
Degree of protection	IP20
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Connection	spring terminals
Electromagnetic compatibility	NE 21:2017 , EN 61326-3-1:2017 , EN IEC 61326-3-2:2018
IECEx marking	Ex ec nC [ia Ga] IIC T4 Gc [Ex ia Da] IIIC [Ex ia Ma] I
Control elements	DIP switch
Height	119 mm
Output/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Functional safety	IEC/EN 61508:2010
Dimensions	12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Contact loading	Zone 2 : 50 V AC/2 A/cos φ > 0.75; 30 V DC/2 A resistive load
IECEx certificate	IECEx BAS 06.0025 X
Minimum switch current	2 mA / 24 V DC

商品名称： P+F 倍加福 KFD2-STC4-Ex2 SIL-Capable Products for Hazardous Areas Safety Integrity Level 2

商品型号： KFD2-STC4-Ex2

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Dimensions	20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) , (W x H x D) housing type B2
EU-type examination certificate	BAS 99 ATEX 7025 X
Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
Power	P 0.586 W
Rated voltage	U 20 ... 35 V DC
Mass	approx. 150 g
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Signal type	Analog input
Electromagnetic compatibility	NE 21:2011
UL approval	E106378
Input signal	0/4 ... 20 mA
Frequency range	field side into the control side: band width with 1 V signal 0 ... 7.5 kHz (-3 dB) safe area to hazardous area: band width with 1 V signal 0.3 ... 7.5 kHz (-3 dB)
Power dissipation	1.8 W
Certificate	TÜV 99 ATEX 1499 X
Input	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Height	124 mm
Output/power supply	functional insulation, rated insulation voltage 50 V AC
Output signal	0/4 ... 20 mA (overload > 25 mA)
Rise time/fall time	20 µs
Safety Integrity Level (SIL)	SIL 2
Labeling	space for labeling at the front
Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Output/Output	functional insulation, rated insulation voltage 50 V AC
Current	I 93 mA
Maximum safe voltage	U 250 V (Attention! The rated voltage can be lower.)
Marking_1	II 3G Ex nA II T4
IECEx certificate	IECEx BAS 04.0015X IECEx CML 15.0055X
Load	0 ... 550 Ω at 20 mA
Deviation	at 20 °C (68 °F), 0/4 ... 20 mA ≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage
Settling time	200 µs
Influence of ambient temperature	0.25 µA/K
Ripple	max. 50 µA
Protection against electrical shock	UL 61010-1:2012
Control drawing	116-0428 (cULus)
Connection	screw terminals
IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex nA IIC T4 Gc
Available voltage	≥ 16 V at 20 mA, terminals 1+, 3
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Depth	115 mm
Degree of protection	IP20
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Power consumption	max. 2.7 W
Marking	II (1)G [Ex ia Ga] IIC , [exsign] II (1)D [Ex ia Da] IIIC , [exsign] I (M1) [Ex ia Ma] I
Voltage	U 25.2 V
Connection side	control side
Display elements	LED
Width	20 mm

商品名称： P+F 倍加福 KFD2-UFT-2.D 信号调节器 K-System (DIN rail, highly functional)

商品型号： KFD2-UFT-2.D

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Degree of protection	IP20
Energized/De-energized delay	approx. 20 ms / approx. 20 ms
Open circuit voltage/short-circuit current_1	18 V / 5 mA
Collective error message	Power Rail
Influence of ambient temperature_1	0.005 %/K (50 ppm)
Connection side	control side
Display elements	LEDs , display
Depth	115 mm
Programming interface	programming socket
Output I, II	signal, relay
Accuracy_1	< 30 µA
Interface/output III, IV	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Input III, IV/power supply and collective error	functional insulation acc. to IEC 62103, rated insulation voltage 50 V
Power consumption	2.5 W
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Measuring range	0.001 ... 1000 Hz
Line fault detection	breakage I ≤ 0.15 mA; short-circuit I > 4 mA
Mutual output I, II, III	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accuracy	slip monitoring: 1% frequency measurement: 0.5% of measured value; but >0.001Hz
UL approval	E223772
Contact loading	250 V AC / 2 A / cos φ ≥ 0.7 ; 40 DC / 2 A
Active/Passive	I > 4 mA (for min. 100 ms) / I < 1.5 mA
Contact loading_1	40 V DC
Output V	analog
Input frequency	rotation direction monitoring 0.001 ... 1000 Hz slip monitoring 10 ... 1000 Hz
Output I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Connection	screw terminals
Rated voltage	U 20 ... 30 V DC
Open circuit voltage/short-circuit current	8.2 V / 10 mA
Load	max. 650 Ω
Current range	0 ... 20 mA or 4 ... 20 mA
Open loop voltage	max. 24 V DC
Resolution	slip monitoring: 1% frequency measurement: 0,1% of measured value; but >0.001Hz
Power dissipation	2.2 W
Influence of ambient temperature	0.003 %/K (30 ppm)
Dimensions	40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Directive 2014/35/EU	EN 61010-1:2010
Switching point/switching hysteresis	logic 1: > 2.5 mA ; logic 0: < 1.9 mA
Input	EN 60947-5-6:2000
Output III and IV	signal , electronic output, passive
Output III, IV/input III, IV	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Output III, IV/power supply and collective error	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Signal type	Digital Input
Labeling	space for labeling at the front
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mass	300 g
Height	119 mm
Pulse duration	min. 250 µs , overlap on direction of rotation signal: ≥ 125 µs
Electromagnetic compatibility	NE 21:2006
Fault signal	downscale I ≤ 3.6 mA, upscale I ≥ 21.5 mA (acc. NAMUR NE43)
Measuring time	frequency measurement: < 100 ms
Configuration	via operating buttons via PACTware
Mechanical life	5 x 10 switching cycles
Interface/power supply and collective error	functional insulation acc. to IEC 62103, rated insulation voltage 50 V
Input I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Mutual output I, II, IV	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Output V/power supply and collective error	functional insulation acc. to IEC 62103, rated insulation voltage 50 V
Width	40 mm
Rated current	I approx. 130 mA
Signal level	1-signal: (L+) -2.5 V (50 mA, short-circuit/overload proof) 0-signal: blocked output (off-state current ≤ 10 µA)
Response delay	≤ 200 ms
Resolution_1	< 10 µA
Input I, II	2-wire sensor, sensor acc. to EN 60947-5-6 (NAMUR) or mechanical contact
Output III, IV/V	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V

商品名称： P+F 倍加福 KFU8-UFT-2.D 信号调节器 K-System (DIN rail, highly functional)

商品型号： KFU8-UFT-2.D

品牌名： P+F 倍加福

分类：安全传感器

订货号：

类型：隔离栅

Electromagnetic compatibility	NE 21:2006
Programming interface	programming socket
Energized/De-energized delay	approx. 20 ms / approx. 20 ms
Output I, II	signal, relay
Response delay	≤ 200 ms
Contact loading	250 V AC / 2 A / cos φ ≥ 0.7 ; 40 DC / 2 A
Switching point/switching hysteresis	logic 1: > 2.5 mA ; logic 0: < 1.9 mA
Input frequency	rotation direction monitoring 0.001 ... 1000 Hz slip monitoring 10 ... 1000 Hz
Open circuit voltage/short-circuit current_1	18 V / 5 mA
Input	EN 60947-5-6:2000
Input I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Mutual output I, II, IV	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Display elements	LEDs , display
Labeling	space for labeling at the front
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Measuring range	0.001 ... 1000 Hz
Directive 2014/35/EU	EN 61010-1:2010
Input III, IV/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Output III, IV/input III, IV	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Output V/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Depth	115 mm
Configuration	via operating buttons via PACTware
Pulse duration	min. 250 µs , overlap on direction of rotation signal: ≥ 125 µs
Line fault detection	breakage I ≤ 0.15 mA; short-circuit I > 4 mA
Resolution	slip monitoring: 1% frequency measurement: 0,1% of measured value; but >0.001Hz
Input I, II	2-wire sensor, sensor acc. to EN 60947-5-6 (NAMUR) or mechanical contact
Output III, IV/V	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Interface/output III, IV	basic insulation according to IEC/EN 61010-1, rated insulation voltage 50 V
Connection	screw terminals
Power dissipation	2.2 W / 3.5 VA
Connection side	control side
Mass	300 g
Height	119 mm
Width	40 mm
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Active/Passive	I > 4 mA (for min. 100 ms) / I < 1.5 mA
Signal level	1-signal: (L+) -2.5 V (50 mA, short-circuit/overload proof) 0-signal: blocked output (off-state current ≤ 10 µA)
Open loop voltage	max. 24 V DC
Interface/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Power consumption	2.5 W / 4 VA
Load	max. 650 Ω
Influence of ambient temperature	0.003 %/K (30 ppm)
Dimensions	40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x H x D) , housing type C2
Open circuit voltage/short-circuit current	8.2 V / 10 mA
Degree of protection	IP20
Fault signal	downscale I ≤ 3.6 mA, upscale I ≥ 21.5 mA (acc. NAMUR NE43)
Mechanical life	5 x 10 switching cycles
Contact loading_1	40 V DC
Output III and IV	signal , electronic output, passive
Output III, IV/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Signal type	Digital Input
Current range	0 ... 20 mA or 4 ... 20 mA
Influence of ambient temperature_1	0.005 %/K (50 ppm)
Mutual output I, II, III	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Rated voltage	U 20 ... 90 V DC / 48 ... 253 V AC 50 ... 60 Hz
Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Output I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 V
Output V	analog
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Accuracy	slip monitoring: 1% frequency measurement: 0.5% of measured value; but >0.001Hz
Measuring time	frequency measurement: < 100 ms
Rated current	I approx. 130 mA
Resolution_1	< 10 µA
Accuracy_1	< 30 µA